FMIC Front Mount Intercooler SALE - TriStateTuners.com :: Home of Tristate Auto Enthusiast

boneheadperformance · 05-12-2005, 10:03 PM

Bonehead Performance is having a special on Megan Racing universal front mount intercoolers. We have 2 sizes in stock. The larger one measures 28 X 11.75 X 3. This thing is big. The smaller measures 22 X 11.75 X 3. Both have 3" outlets. Bar plate design which is much stronger than the tube fin design. These are perfect for a custom installation.

Here is a description from Megan Racing Aluminum made intercooler, the Welds on the Tank and Inlet/Outlet are of top notch professional quality, this will not corrode or rust this Intercooler will outlast the car . This Intercooler is designed for Maximum Air Flow always allowing cooler Air to reach the Intake for more HP , your Turbo System will breathe Better and you will definitely see improvement when upgrading with this Intercooler. Before purchasing please make sure that you have enough room to accept the Intercooler. These will fit Many Imports and Domestic as well, such as Nissan, Honda , Toyota , Mazda, Mitsubishi and much More , this is also great for your custom project. This Intercooler will easily handle 500HP , Approx. Flow Rate 750 CFM .

Smaller IC PIC:

http://meganracing.com/uploadImage/r...%20numbers.JPG

Larger IC PIC:

http://meganracing.com/uploadImage/r...%20numbers.JPG

Small IC $210
Large IC $225

In stock and ready to go!!!

Intercooled T · 05-30-2005, 05:42 PM

Do you guys make custom piping for the intercoolers to fit different applications?

boneheadperformance · 06-02-2005, 11:07 AM

I am sorry but we do not do any custom work yet. I am looking into starting it though.

05-12-2005, 10:03 PM	#1
boneheadperformance Vendor Join Date: Apr 2005 Location: Warminster, PA Member #382 iTrader: (0)	FMIC Front Mount Intercooler SALE Bonehead Performance is having a special on Megan Racing universal front mount intercoolers. We have 2 sizes in stock. The larger one measures 28 X 11.75 X 3. This thing is big. The smaller measures 22 X 11.75 X 3. Both have 3" outlets. Bar plate design which is much stronger than the tube fin design. These are perfect for a custom installation. Here is a description from Megan Racing Aluminum made intercooler, the Welds on the Tank and Inlet/Outlet are of top notch professional quality, this will not corrode or rust this Intercooler will outlast the car . This Intercooler is designed for Maximum Air Flow always allowing cooler Air to reach the Intake for more HP , your Turbo System will breathe Better and you will definitely see improvement when upgrading with this Intercooler. Before purchasing please make sure that you have enough room to accept the Intercooler. These will fit Many Imports and Domestic as well, such as Nissan, Honda , Toyota , Mazda, Mitsubishi and much More , this is also great for your custom project. This Intercooler will easily handle 500HP , Approx. Flow Rate 750 CFM . Smaller IC PIC: http://meganracing.com/uploadImage/r...%20numbers.JPG Larger IC PIC: http://meganracing.com/uploadImage/r...%20numbers.JPG Small IC $210 Large IC $225 In stock and ready to go!!!

05-30-2005, 05:42 PM	#2
Intercooled T Tri-State Post Whore Join Date: Mar 2005 Location: Fairless Hills, PA Member #207 My Ride: 2003 Toyota Rav4 iTrader: (0)	Do you guys make custom piping for the intercoolers to fit different applications? __________________ 2003 Toyota Rav4, 2.0L/Auto/AWD To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 2013 Nissan Juke, 1.6T/Auto/FWD (wife's car lol To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. )

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front Mount Intercooler	Oreo931	Gallery	13	01-21-2008 12:56 PM
TurboXS Front Mount Intercooler WRX/STi SALE!!	201Motorsports	(Past Vendors)	2	08-20-2006 11:12 PM

06-02-2005, 11:07 AM	#3
boneheadperformance Vendor Join Date: Apr 2005 Location: Warminster, PA Member #382 iTrader: (0)	I am sorry but we do not do any custom work yet. I am looking into starting it though.