HUGE Powder Coating SALE!!! - TriStateTuners.com :: Home of Tristate Auto Enthusiast

boneheadperformance · 08-25-2006, 01:05 PM

END OF THE SUMMER POWDER COATING SALE

Heres your chance to save on our powder coating services.

20% OFF advertised prices on our powder coating price list. This sale will run NOW until the end of September.

Save big!!!

www.boneheadperformance.com
215-295-4350

Must mention ad to receive discount.

**TROLL** · 08-25-2006, 01:17 PM

well now isnt that good timing... i'll be in touch next week

boneheadperformance · 08-25-2006, 01:20 PM

No rush Bryan. I am running the sale until the last day of September.

Gaze · 08-25-2006, 01:29 PM

Nice deal... What would the time frame be for having a 4g64 valve cover done? I have a week off in September but really can't do without the cover unless i can track down another one at a yard.

Renegade_ · 08-25-2006, 01:30 PM

so 208 bucks to get 4 17" rims powdercoated? Not bad, I'll check you guys out when it comes time.

boneheadperformance · 08-25-2006, 01:33 PM

Quote:

Originally Posted by Gaze

Nice deal... What would the time frame be for having a 4g64 valve cover done? I have a week off in September but really can't do without the cover unless i can track down another one at a yard.

Downtime all depends on how much work is sitting here when you are ready to do your cover. One day I could be slow the next could be swamped. I try to get most valve covers done and out within 1-2 days but time may vary depending on workload.

boneheadperformance · 08-25-2006, 01:35 PM

Quote:

Originally Posted by Renegade_

so 208 bucks to get 4 17" rims powdercoated? Not bad, I'll check you guys out when it comes time.

Yep $208 for 17" wheels powder coated in a 1 color. The only 2 step colors are the chrome smoke (gunmetal) and candy/translucent/anodized colors

D Money · 08-25-2006, 01:36 PM

Do you have an idea what it would cost to get wrx intercooler pipes done glossy black? They are about 6ft.

boneheadperformance · 08-25-2006, 01:40 PM

Quote:

Originally Posted by subwrxkid

Do you have an idea what it would cost to get wrx intercooler pipes done glossy black? They are about 6ft.

IC piping is normally $1 per inch. 6 ft= $72 - 20%= $57.60. To measure the piping, take a string and measure around the bends and hold it up to a tape measure. This will give you an acurate measurement.

D Money · 08-25-2006, 01:42 PM

Quote:

Originally Posted by boneheadperformance

IC piping is normally $1 per inch. 6 ft= $72 - 20%= $57.60. To measure the piping, take a string and measure around the bends and hold it up to a tape measure. This will give you an acurate measurement.

Wow, that's not bad at all! I am going to go to the body shop today and see if he will let me take my piping off. lol

Can you guys polish fmic cores? I already had mine done but I want it touched up. Just wondering if you guys did that or not.

boneheadperformance · 08-25-2006, 01:56 PM

Quote:

Originally Posted by subwrxkid

Wow, that's not bad at all! I am going to go to the body shop today and see if he will let me take my piping off. lol

Can you guys polish fmic cores? I already had mine done but I want it touched up. Just wondering if you guys did that or not.

Sorry no polishing done here.

boneheadperformance · 09-01-2006, 11:01 PM

Bump for the sale

Mr. SUAVE · 09-01-2006, 11:39 PM

good deal! Now I have to look for evo 7 valve cover! someone buy my injectors please.........

AMF Racing · 09-03-2006, 01:55 AM

hey man i got a question......my fiance has some 17'' cobra rims on her stang. there is some curb rash on a few of them, can i just take a sander and sand it down smooth before i bring them to get coated? or do you have the tools to do it?

StealthTC · 09-03-2006, 02:11 AM

I am going to be dropping off a set of wheels off next week than, PM me I saw a certain color I wanted, just wanted to find out what is it exactly. Looks like a black chrome color.

boneheadperformance · 09-03-2006, 07:35 PM

Quote:

Originally Posted by AMF Racing

hey man i got a question......my fiance has some 17'' cobra rims on her stang. there is some curb rash on a few of them, can i just take a sander and sand it down smooth before i bring them to get coated? or do you have the tools to do it?

Yes you can take a sander to smooth them out some. 9 times out of 10 if the wheels are powder coated it is just the powder coat that is scuffed up and once they are stripped the metal is perfect under the coating. To be on the safe side though you can take a light sander to smooth out the rough edges before bringing them in.

boneheadperformance · 09-03-2006, 07:43 PM

Quote:

Originally Posted by StealthTC

I am going to be dropping off a set of wheels off next week than, PM me I saw a certain color I wanted, just wanted to find out what is it exactly. Looks like a black chrome color.

I have PMed you

yellow2000S/R · 09-03-2006, 11:04 PM

Are you capable of Powder Coating plastic?

What would be a total price of the following all coated in the closest coating to chrome:

4cyl Valve Cover
4cyl Shorty Header
2.5 ft long 3" round intake
3.5 ft long oval (about 1.25" wide and 3/4" thick) strut bar

And for the future:
All 4 lowering springs (got some overspray on the tops of them paintin my car)
All 4 brake calipers (currently high temp painted but chipping some)

bcnick · 09-04-2006, 06:22 PM

can you powdercoat brake calipers with the pistons still in them or do the caliper pistons need to be removed?

S4toSTI · 09-04-2006, 06:24 PM

I don't think you can powder coat plastic.

08-25-2006, 01:05 PM	#1
boneheadperformance Vendor Join Date: Apr 2005 Location: Warminster, PA Member #382 iTrader: (0)	HUGE Powder Coating SALE!!! END OF THE SUMMER POWDER COATING SALE Heres your chance to save on our powder coating services. 20% OFF advertised prices on our powder coating price list. This sale will run NOW until the end of September. Save big!!! www.boneheadperformance.com 215-295-4350 Must mention ad to receive discount.

08-25-2006, 01:29 PM	#4
Gaze Tri-State Aficionado Join Date: Aug 2006 Location: South Jersey Member #2322 My Ride: 96 Jeep ZJ, 07 Jeep Patriot iTrader: (0)	Nice deal... What would the time frame be for having a 4g64 valve cover done? I have a week off in September but really can't do without the cover unless i can track down another one at a yard. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

08-25-2006, 01:30 PM	#5
Renegade_ Tri-State Post Whore Join Date: May 2006 Location: NNJ/NYC Member #1912 My Ride: 1J Swaggon iTrader: (2)	so 208 bucks to get 4 17" rims powdercoated? Not bad, I'll check you guys out when it comes time. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

09-01-2006, 11:39 PM	#13
Mr. SUAVE Tri-State Addict Join Date: Jun 2005 Location: Pennsauken Member #529 My Ride: EVOLUTION iTrader: (0)	good deal! Now I have to look for evo 7 valve cover! someone buy my injectors please......... __________________ EVOLUTION-made by chopsticks.

09-03-2006, 01:55 AM	#14
AMF Racing Tri-State Post Whore Join Date: Apr 2005 Location: New Jersey Member #323 iTrader: (2)	hey man i got a question......my fiance has some 17'' cobra rims on her stang. there is some curb rash on a few of them, can i just take a sander and sand it down smooth before i bring them to get coated? or do you have the tools to do it? __________________ CARS-------------------------------BIKES 02 CIVIC SI----------------------- 03 VTR1000 89 XJ--------------------------------79 GS1000 09 PILOT

08-25-2006, 01:20 PM	#3
boneheadperformance Vendor Join Date: Apr 2005 Location: Warminster, PA Member #382 iTrader: (0)	No rush Bryan. I am running the sale until the last day of September.

09-01-2006, 11:01 PM	#12
boneheadperformance Vendor Join Date: Apr 2005 Location: Warminster, PA Member #382 iTrader: (0)	Bump for the sale

09-03-2006, 02:11 AM	#15
StealthTC Tri-State Addict Join Date: Dec 2005 Location: Ft. Lauderdale, Florida Member #1114 My Ride: B5 A4, MKIII Supra iTrader: (0)	I am going to be dropping off a set of wheels off next week than, PM me I saw a certain color I wanted, just wanted to find out what is it exactly. Looks like a black chrome color.

09-03-2006, 11:04 PM	#18
yellow2000S/R Tri-State Post Whore Join Date: Sep 2006 Location: York, Pa Member #2462 My Ride: 1996 7.3 f250, 2001 Focus wagon iTrader: (2)	Are you capable of Powder Coating plastic? What would be a total price of the following all coated in the closest coating to chrome: 4cyl Valve Cover 4cyl Shorty Header 2.5 ft long 3" round intake 3.5 ft long oval (about 1.25" wide and 3/4" thick) strut bar And for the future: All 4 lowering springs (got some overspray on the tops of them paintin my car) All 4 brake calipers (currently high temp painted but chipping some)

09-04-2006, 06:22 PM	#19
bcnick Tri-State Training Wheels Join Date: Mar 2006 Member #1612 iTrader: (0)	can you powdercoat brake calipers with the pistons still in them or do the caliper pistons need to be removed?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
January Powder Coating SALE	boneheadperformance	Bonehead Performance	13	02-13-2008 10:32 PM
Powder Coating XMAS Sale	boneheadperformance	Bonehead Performance	20	01-08-2007 11:48 AM
July Powder Coating Sale	boneheadperformance	Bonehead Performance	0	06-26-2006 05:12 PM
XMAS Sale- 10% off Powder Coating work	boneheadperformance	Bonehead Performance	12	01-05-2006 12:36 PM
June Powder Coating SALE for Tri State Tuner members	boneheadperformance	Bonehead Performance	15	06-07-2005 09:19 PM