I have for sale two sets of Manley Turbo Tuff design I beam rods. Information on these rods is as follows:
- Forged from 4340 aircraft quality vacuum degassed material
- Shot peened after machining and 100% magnafluxed
- Cap fasteners are 3/8" ARP 2000 cap screws
- Premium Ampco pin bushings
- Specifically designed to handle high horsepower applications when using turbos and/or nitrous.
- Horsepower range for these rods is 1,000+ H.P.
First set is for a
Toyota Supra 3.0 2JZG (1993-1998)
Manley Part # 14402-6
Brand new in box!!!
Center-to-Center: 5.590"
Big End Bore: 2.167"
Big End Width: 1.015"
Pin Diameter: .866" (22 mm)
Pin Bore: .8671"
**** Please note that normally big ends are normally matched within 3 grams and these are within 5 grams. The weights on these rods are as follows:
Big End / Pin End
- 495.6g / 218.8g
- 495.3g / 220.2g
- 493.5g / 220.2g
- 498.7g / 217.9g
- 497g / 219g
- 496g / 219.6g
These rods retail at $1,140. We're selling this set for
$780 shipped.
The second set is for a
Nissan 2.6 Skyline RB26DETT (1992-2001)
Manley Part # 14411-6
Brand new in box!!!
Center-to-Center: 4.783"
Big End Bore: 2.008"
Big End Width: .857"
Pin Diameter: .827" (21 mm)
Pin Bore: .8281"
**** Please note that normally big ends are normally matched within 3 grams and these are within 5 grams. The weights on these rods are as follows:
Big End / Pin End
- 423.8g / 185.2g
- 426.1g / 185g
- 420.6 / 186.3g
- 421.6 / 185.3g
- 426.1g / 185.2g
- 425.5g / 185.7g
These rods retail at $1,140. We're selling this set for
$780 shipped.