Sale on Manley I Beam Rods for 2JZ and RB26DETT
 

I have for sale two sets of Manley Turbo Tuff design I beam rods. Information on these rods is as follows:

• Forged from 4340 aircraft quality vacuum degassed material
• Shot peened after machining and 100% magnafluxed
• Cap fasteners are 3/8" ARP 2000 cap screws
• Premium Ampco pin bushings
• Specifically designed to handle high horsepower applications when using turbos and/or nitrous.
• Horsepower range for these rods is 1,000+ H.P.

First set is for a Toyota Supra 3.0 2JZG (1993-1998)
Manley Part # 14402-6
Brand new in box!!!

Center-to-Center: 5.590"
Big End Bore: 2.167"
Big End Width: 1.015"
Pin Diameter: .866" (22 mm)
Pin Bore: .8671"

**** Please note that normally big ends are normally matched within 3 grams and these are within 5 grams. The weights on these rods are as follows:

Big End / Pin End

1. 495.6g / 218.8g
2. 495.3g / 220.2g
3. 493.5g / 220.2g
4. 498.7g / 217.9g
5. 497g / 219g
6. 496g / 219.6g

These rods retail at $1,140. We're selling this set for $780 shipped.


The second set is for a Nissan 2.6 Skyline RB26DETT (1992-2001)
Manley Part # 14411-6
Brand new in box!!!

Center-to-Center: 4.783"
Big End Bore: 2.008"
Big End Width: .857"
Pin Diameter: .827" (21 mm)
Pin Bore: .8281"

**** Please note that normally big ends are normally matched within 3 grams and these are within 5 grams. The weights on these rods are as follows:

Big End / Pin End

1. 423.8g / 185.2g
2. 426.1g / 185g
3. 420.6 / 186.3g
4. 421.6 / 185.3g
5. 426.1g / 185.2g
6. 425.5g / 185.7g

These rods retail at $1,140. We're selling this set for $780 shipped.