View Full Version : 03 Maxima ebrake cable.
ClutchMasterF1
05-15-2009, 04:03 AM
My ebrake cable snapped or something. It was like that when i got the car but i yanked it accidentally and it locked my rear left tire. Any suggestions on how to get the caliper to release the rotor?
Thanks
cburwell
05-16-2009, 12:13 PM
It sounds like the cable seized in the "on" position. You can always disconnect to the cable from the caliper and secure it out of the way until you get a new cable. You will probably have to carefully pry the cable off of the caliper since it's stuck.
ClutchMasterF1
05-16-2009, 02:44 PM
It sounds like the cable seized in the "on" position. You can always disconnect to the cable from the caliper and secure it out of the way until you get a new cable. You will probably have to carefully pry the cable off of the caliper since it's stuck.
I got it. There is a spring type mechanism behind the rear caliper. I just gently hammered it back to position to release the rotor!
Thanks
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.