What are your 2005 modding plans?

[Smokescreen]

Well the 1st day of Spring just passed, birds are chirping and leaving surprises on my car, my eyes are starting to become itchy and watery, Blizzaks are ready to come off, cars are being hand washed and the RWD cars are coming out of hiding. I guess Spring is coming.

So let’s hear it. What are you doing to you car this year?

[criz]

fuel system, wheels, front lip, gauges, and a proper dyno tune

[95nracer]

Hmmm, I don't know? I know a windshield for sure. The one I have is cracked and have scratches all over it. Maybe new fuel and timing control if pocketlogger.com ever comes out with the new version 2.0 with dataloging.

[TehWagon]

Get my wheels/tires put on, put on the intake i just purchased; put in steering column cover w/boost gauge i just purchase, along with the STi cluster, downpipe, exhaust, springs, swaybars ... stay tuned... hee hee
hence the part time job!!! :help:

[MuddyREX]

Who knows, right now I am poor.

But I will be adding a second baby seat to the back of my Rex. Priorities..... ;)

http://img.photobucket.com/albums/v308/muddyrex/856900000.jpg

[JasterM5]

The question is really, What wont I do? I pretty much redid the whole thing but theres always more.

[SmokeyBandit]

what can I afford????

timing belt change is not a mod....but a must

TDI winter clutch slip....Autotech 10# flywheel with Spec Stage 2

Chip and injectors

Junkyard for TT front caliper carrier and rear caliper/carrier and buy new pads and rotors

[95nracer]

^AH! Yes, I need some pads to. Some Hawk brake pads, also maybe some new rotors.

[mazda6guy]

For the MX-6 I will be ordering a new hood for the Ocean City , MD cruise in June. I am going to install all new suspension and steering parts to the RX-7. I am looking forward to the warm weather. Life sucks when you have no garage. :cry:

[teh DIRT]

ill be building a motor over the summer if things work out right.

[Aaron]

mowing lawns this summer?? :lol:

[mysweetfracture]

selling my car hopefully :mrgreen:

[ixlr811s]

getting tuned! My project should be finished within the next 3 weeks. The only "mod" eft is a little shot to spool up the SBR GT14.

[SpendOne]

Head studs, head gasket, 20g turbo, motor mounts, sheetmetal intake mani, rest of my alignment ish (camber correction) and dyno tuning. All hopefully done in a matter of 2 weeks. :mrgreen: After that its time to build this spare motor and get the car painted.

[the mike]

I was thinking cams, head studs, and IC piping, but I might put some cash into the 240.
A dyno tune is definately in the works though.

[SilverBulletRL]

2" Drop

And more boost!!! :banana:

[97TSi]

For the MX-6 I will be ordering a new hood for the Ocean City , MD cruise in June.

You aren't talking about the PT meet by any chance are you?? Last year was fun for the small amount of time I was able to hang out w/everyone. Looking forward to it again this year. I go by "PGTred95" on PT btw.

Oh ya, modding plans for '05. Built block is on the way in a week or two.
After that I'll probly rock a 1g top end for a while as ported heads are way too much for me right now. Built trans w/lsd and slicks. Big turbo, not sure what yet, but something flowing enough to make MAX 650hp. Standalone, blah, blah, blah, and the list goes on :rolleyes:

[TrboChicsRock]

Front mount, wheels / tires, suspension and finish building my 6 bolt :D

[jigga_x]

-(2) 15" rims w/BF Goodrich Drag Radiala
-silver racing stripes
-springs (cause i can't afford coilovers)
-psi fi traction kit (control arms)
-slotted rotors w/Hawk pads
-needswings 3" downpipe w/dump cutout
-MP3 player
-carbon fiber front lip (already have it, just have to install it)

[Blue32]

Well my new rims will be here soon, then I will be calling AWE and getting GIAC flashed, then i will pick of a GHL CAI and also all three VF engine mounts.. and then hopefully my HIDs will be here soon

[bjc26]

Front mount, wheels / tires, suspension and finish building my 6 bolt :D

I think you mean to say Start building the 6 bolt motor... :lol:

[GSXDCY]

20g, tubular mani, 660's or bigger, s-afc, awd dyno time at turbo trix = King of the Streets

[bjc26]

Talon:
Fully built block, fully ported and built head, dsmlink, bigger fmic, slicks, rebuilt trans w/ kaaz lsd, more weight removal, much bigger turbo, smim, external wastegate, upgraded fuel system. (8 of those items to be on within the next month :D )

Audi:
Chip for ecu and trans, some exterior stuff, maybe rims.

Going to be a fun season!

[TrboChicsRock]

Front mount, wheels / tires, suspension and finish building my 6 bolt :D

I think you mean to say Start building the 6 bolt motor... :lol:

Yeah.. I got the motor, so it's a start ;) lol

[sesolcSTI]

Install Omori boost gauge that is in the mail, Put my Godspeed downpipe on, get some springs, Cobb Accessport, and if im good and save some money possibly a V-limited front lip (which ill probably end up destroying in mikes driveway anyhow) ha. :finga: :thumbup:

[1988 Olds]

Fixing my Oil Leak, Hmm that's about all that's left for now.

[UnderPoweredRS]

My plans are to hold it together for more then a few months at a time. :-\

[the mike]

Install Omori boost gauge that is in the mail, Put my Godspeed downpipe on, get some springs, Cobb Accessport, and if im good and save some money possibly a V-limited front lip (which ill probably end up destroying in mikes driveway anyhow) ha. :finga: :thumbup:

Back off pal. I can't get the 240 in there at all.
It will get worse soon. ;)

[auk113]

SR blacktop for me

[96Stang]

keepin her running!!! lol

[seneca]

Hydra, forgies for the ej257, rotated turbonetics kit, gauges, pe850's, act clutch, springs, sways, endlinks, and water/air ic. We should dig this thread up next spring and where we all landed.

[seneca]

Hydra, forgies for the ej257, rotated turbonetics kit, gauges, pe850's, act clutch, springs, sways, endlinks, and water/air ic. We should dig this thread up next spring and where we all landed.

[99SL2_Modder]

Forged pistons (debating on CR still), superhot cams, experimental intake manifold, AT equal length tubular manifold, T3/T66 hybrid turbo running +20psi, experimental head port and valve grind (to try and reduce float), a few other things, like stock in tires.

[Twin_Cam]

Rebuilt engine, Magnaflow high-flow cat and muffler (in the mail), OEM tubular header, Kumho Ecsta 711 tires (waiting to be mounted), SPS bushings, and maybe an oil pressure and volt gauge.

Might paint it primer black, too :devil:

[SilverBulletRL]

eh, I just ordered an intercooler today... so yeah I guess you can tell where I'm goin with this. Oh yeah... the supercharger is staying on BTW....

got twins?

[79Poncho]

Planning the complete RAM AIR IV package, and WS6 package...new hood, paint and decals.

[99SL2_Modder]

Planning the complete RAM AIR IV package, and WS6 package...new hood, paint and decals.

:finga:

I want a before and after ride.

[SexyDSM95]

A big effin turbo...

[CarbonIS]

hopefully i'll be able to save enough for a turbo package from either
TurboEast or SRT...I'll have the new body kit...I'm going to get the suede in the
center of my seats which is black now done in red suede, along with red piping
Hopefully an aftermarket sounds system (which i'm reluctant to do because the
stock one is so freakin awesome)

Any other suggestions?

[seneca]

sell it and buy a subie. =P jk man.

[CarbonIS]

haha i wish i could

[xEJ20x]

currently on:
aem s/r intake

awaiting application:
Tanabe springs
HKS exhaust
Blitz FATT turbo timer

next: no specific order
downpipe
uppipe
Rims/tires
fuel pump
larger turbo
engine management
fmic
cf hood
vented rotors
sti wing
05 sti gauge cluster
defi boost gauge
jdm sti headlights
some form of aero kit, i havent seen one i like
maybe a new head unit