SoStock92
03-19-2009, 04:30 PM
These are some 17x8.5 and 17x10" Rondell 72's I've had for a few years. got a flat back in college (wore thru the tread) and wanted to refinish them. Toyed with stripping them in air craft remover with the tires still on, but ended up not getting very far. Finally had the tires removed and took the wheels to Bonehead - Chuck hooked me up and they came out great!
The PO curbed the turds out of one of the rear wheels but Chuck did a good job grinding it out a good bit - the wheel isnt perfect but I knew that when I brought them in. If I wanted to have them welded up I could do that (powder is easy to strip compared to the original finish!).
Anyway, here they are!
http://jonkensy.com/gallery/albums/userpics/10001/black72_1.jpg
http://jonkensy.com/gallery/albums/userpics/10001/black72_2.jpg
Woo!
Going to mock up a brake behind one later tonight
The PO curbed the turds out of one of the rear wheels but Chuck did a good job grinding it out a good bit - the wheel isnt perfect but I knew that when I brought them in. If I wanted to have them welded up I could do that (powder is easy to strip compared to the original finish!).
Anyway, here they are!
http://jonkensy.com/gallery/albums/userpics/10001/black72_1.jpg
http://jonkensy.com/gallery/albums/userpics/10001/black72_2.jpg
Woo!
Going to mock up a brake behind one later tonight