PDA

View Full Version : looking for a vendor to re turbo my car while im away for business


Vr-4-Life
01-11-2009, 11:01 PM
I'm looking for some turbo work from a local shop.

This is a very easy job that just takes time and a warm garage.. Sadly those are two things that i dont have. Im being sent to cali the first week in feb for work. That might be a great time for me to part with the car for a bit.

Here is what needs to be done

Swap the stock oil pan for the tapped one
Install my blue top injectors
Install the resistor pack (i have an oem honda and dsm)
Put the chip back in the zif socket in the ecu
Put the manifold on the turbo is already bolted on with the ewg
Install the downpipe(may need to be shortened or extended)
Bolt on the VTA flexable dump tube
Install about 4 very easily accessable intercooler pipes (bov already on one)
Connect the vac lines to the ewg and bov
Install the sandwich adaptor and run the oil line to the turbo
connect the return line

The car will need a new tune however that can wait since i can use the map from the old setup for now.


Things that are still in the car that dont need to be added

Walbro 255 lph pump
Golden eagle vacuum block (may not need it but its nice to have)
Front mount and some piping (the tricky piping was left on)
boost gauge
fp gauge


I have all of the required vacuum lines and gaskets and seals.

If the price is fair I might just let this work get done by a pro while im away. If not ill just wait till its warmer and do it myself.

feel free to PM me prices and your location

Thanks!

Vr-4-Life
01-13-2009, 12:10 AM
anyone?

Vr-4-Life
01-24-2009, 11:55 PM
I dont understand why no one is getting back to me.

You guys dont want money?

SvicksTc
01-25-2009, 04:12 AM
If i wasnt anyway at school i would help you out man.....

Bump for someone to help a fellow tuner out

Vr-4-Life
01-25-2009, 11:47 AM
heh. if it wasnt so cold i would do this myself... the only thing i cant do is weld the DP and tune it... so i figured id just let a tuner do it all.

Ender81
01-25-2009, 11:59 AM
Shoot a message to Area1320 and see if he would be interested.

jdm free
01-25-2009, 12:02 PM
yea just pm a few vendors that are in ur area.

Vr-4-Life
01-25-2009, 12:22 PM
right now im going to look into street solutions... has anyone had an experence with them?

Ender81
01-25-2009, 12:36 PM
I haven't personally but they are a vendor here so check for some reviews. The only place I can vouche for is 1320 because I won't take my WRX anywhere else.

D Money
01-25-2009, 12:45 PM
Email or call Verocious Motorsports, talk to Alex or Andy and let them know I suggested you go there. They can handle all of this for you.

Vr-4-Life
01-25-2009, 12:51 PM
keep in mind this is for my honda not my mitsubishi.... dmitri where is verocious at?

D Money
01-25-2009, 12:52 PM
Delaware.

They can do ANYTHING. They just built some crazy ass race hatch there. ****ing ridiculous. Just give them a call, mention me, and let them know what you want done.

Vr-4-Life
01-25-2009, 12:57 PM
Ill keep them in mind... im still trying to find myself a tiny lil turbo for this thing.

.42 ar 45 trim FTW... i want this thing to boost 10PSI from 2.5k to like 7200....

Ender81
01-25-2009, 01:53 PM
I don't remember what the turbo was but 1320 did an S2000 that was 465hp at 16psi :devil:

Vr-4-Life
01-25-2009, 03:39 PM
Heh those cars make sick power when boosted. I can only imagine driving it with the top off..


anyway the last time my car was boosted it made 200 whp... and the last turbo kit was a hack job IMHO.. my new exhaust should flow 100X better.

Ender81
01-25-2009, 05:21 PM
Yeah I would have loved to have gotten a ride in it.