I need custom IC pipes fab'd for my wrx.

[karl]

hey guys, i got a 04 wrx that im going to be reversing my intake manifold. im also going to be clocking my turbo to make the ic pipe route better.

here is basically what im looking for. my turbo is not gonna be clocked and rotated exactly like this though.
http://i3.photobucket.com/albums/y83/toyskater/blah/DSC_0719.jpg

this is how turbo is gonna be.
http://www.ellisfamilyalbum.com/Car%20stuff/My%20Subaru%20Impreza%20Project/Reverse%20Manifold/Reassembly/slides/IMG_2522.JPG

This is also how it will be except im keeping my alternator.
http://forums.nasioc.com/forums/showpost.php?p=20404450&postcount=43

so to sum it all up, the first pic is how my alternator is gonna be, and the link is how my turbo is gonna look. so combine the two and thats what i need. Everything will be done besides the pipes, obviously. any idea how much that would cost me?

[Verocious]

What hood are you going to use with the setup?

Andy

[karl]

it would be stock hood. i imagine a bit of the underside is gonna have to be trimmed a little.

[Verocious]

Normally a stock WRX or STi hood will give more clearance than an RS hood would. The RS hood has some reinforcement right where the piping connects to the throttle body and can be a bit a bit of a bear to clear. So there should not have to be too much trimming of the hood.

Parts to fab the piping would be approx $350. That included piping, couplers, bends, filler rod and gas. Labor would be about $450.

Andy