Mazdas Where R U?

[Protege v2.5]

Was just wondering who all has a mazda on here. I'm not seeing alot:(.

[sean3]

I have one. It's slow.

[Protege v2.5]

Ha. that could be changed.

[95nracer]

< Here :)

[Protege v2.5]

Just copy this set-up and you'll get 550 plus hp.

http://memimage.cardomain.net/member_images/12/web/552000-552999/552940_190_full.jpg

[BradC]

Mazda here too.

[Cardriverx]

I have one, its not slow :rolleyes:



well, right now it has no diff in it, so I guess its pretty slow.

[MPowerKai]

zoom zoom zoom

[FlashFive]

I have one. It's slow.

Mines slower, but when it comes to cornering...:banana:


But yea there are not enough of us on here!

[i like rice]

Mazda crew +1

[Cardriverx]

I like rice, you should get a bigger turbo on that car. Those stock MSM turbos are tiney and run out of steam at high revs, stock dyno graphs suck.

[Omar_MSP]

im here aswell

[Loserkidwac]

MSP owner...but im trying to sell it :(

[NOPSTNS]

i claim to be the only rx8 owner on tst....


dont prove me wrong tho, let me endulge in my ignorance
:)

[i like rice]

I like rice, you should get a bigger turbo on that car. Those stock MSM turbos are tiney and run out of steam at high revs, stock dyno graphs suck.

I didn't buy the car for high hp. If I wanted a faster car, I would've bought a Z06 Vette. On the Miata, you get to a certain point where the hp changes the balance of the car and it's no longer a good handling vehicle.

[PaleDSM]

I didn't buy the car for high hp. If I wanted a faster car, I would've bought a Z06 Vette. On the Miata, you get to a certain point where the hp changes the balance of the car and it's no longer a good handling vehicle.

Very very hard to make most understand that.:furious:

[SovXietday]

Very very hard to make most understand that.:furious:

Turning is overrated.:-p

[driftingrx5.7]

the only rx7 vert on the board :)

[Protege v2.5]

Schweetness, I'm not alone. But I'd say I'm the slowest with a NA Protege. Hence the plans for the KL swap.

[FlashFive]

Schweetness, I'm not alone. But I'd say I'm the slowest with a NA Protege. Hence the plans for the KL swap.

depends, if your an auto then yea, if its a 5 speed 2.0l, then no...its me lol.

But as far as I know im the only pro5 on here, at least I was before the sonic meet but idk anymore.

[BradC]

Schweetness, I'm not alone. But I'd say I'm the slowest with a NA Protege. Hence the plans for the KL swap.

Noooo to the KL :(


Boost the FS-DE.

If you really are hung-up on a motor swap, throw in a stroked FE3 with IRTBs :) :)

[Protege v2.5]

Well I'm staying NA.

But if I was going turbo, Still yes to KL
http://www.mazdaspd.com/galleries/albums/ptp5t/pro1.jpg

[NOPSTNS]

KL = mistake



take it from a mazda tech

[i like rice]

depends, if your an auto then yea, if its a 5 speed 2.0l, then no...its me lol.

But as far as I know im the only pro5 on here, at least I was before the sonic meet but idk anymore.

We should have a TST Slowest Mazda contest. I'll give the winner a free photo shoot of their car with a 16x20" wall print lol

[Protege v2.5]

KL = mistake



take it from a mazda tech


Please tell of this, why is it a mistake?


We should have a TST Slowest Mazda contest. I'll give the winner a free photo shoot of their car with a 16x20" wall print lol

How should we decide?

[FlashFive]

We should have a TST Slowest Mazda contest. I'll give the winner a free photo shoot of their car with a 16x20" wall print lol

O hell yea im there!! Wait until I get my new wheels on, they will slow me down even more, I got that **** on lock! lol

[BradC]

Well I'm staying NA.



FE3 with IRTBs. Do it.

[Protege v2.5]

Reason why I'm doing the KL is cause its a direct swap

[i like rice]

Please tell of this, why is it a mistake?

How should we decide?

We could do an autocross in the Philly/Susquehanna region.

[Cardriverx]

On the Miata, you get to a certain point where the hp changes the balance of the car and it's no longer a good handling vehicle.

I disagree, you can just modulate with your right foot. the better the hp/weight, the happier I am :mrgreen:

[Protege v2.5]

We could do an autocross in the Philly/Susquehanna region.

Give me a time and a place.

Hell, we should just do an All Mazda Meet.

[gpzjack]

Mazda5 here...if you gotta have a minivan its the one to have. LOL

[FlashFive]

We could do an autocross in the Philly/Susquehanna region.

I do it, but idk, ive been told my car isnt half bad at auto-x, but then again ive never done it either. But sandbagging could be an issue too lol

[amp]

raises hand..

[BradC]

Reason why I'm doing the KL is cause its a direct swap

Is it really a direct swap? I know the motor drops it without much work, but how will you control the motor?

The stock ECU won't run the KL, but the KL ECU won't run your cluster, alternator, etc. So would you will either have to replace the cluster or run both ECUs in parallel? I know its been done before, but not sure what all is entailed. Most I've seen are converted to an OBD-I harness.

Is this going to be a street car (i.e. - needs to pass inspection & emissions)?

[Gil]

93 rx7 here

[1nicerex]

A 7 hear too! :inlove:

[Protege v2.5]

Is it really a direct swap? I know the motor drops it without much work, but how will you control the motor?

The stock ECU won't run the KL, but the KL ECU won't run your cluster, alternator, etc. So would you will either have to replace the cluster or run both ECUs in parallel? I know its been done before, but not sure what all is entailed. Most I've seen are converted to an OBD-I harness.

Is this going to be a street car (i.e. - needs to pass inspection & emissions)?

Sorry, Mechanically its a direct bolt in. Wiring on the other hand is a whole different story. OBDII can be used if you can your hands on a 96 plus manual 626

[Protege v2.5]

So where are we doing the all mazda meet?

[BradC]

\OBDII can be used if you can your hands on a 96 plus manual 626
Cool, did not know that.

[05 mazda6s]

Had a mazda6s as you can tell from my user name lol, but theres things about the car i miss. I also wont forget the difference in clutch from the 6 to the mechanical heavy duty clutch in the cobra. import clutches are like a feather lol

[FlashFive]

So where are we doing the all mazda meet?

sonic...since its the cool place to be of course...

[Protege v2.5]

Ok motion to have meet at Sonic? All in favor say "I". All for something else......please suggest.

[justinlansdale]

MSP here..

[FlashFive]

Ok motion to have meet at Sonic? All in favor say "I". All for something else......please suggest.

it was just a random idea due to the success of the last meet their, plus its a sweet place for a car meet.

[Protege v2.5]

I figured I'd just get the ball rolling......lol

[ben]

i claim to be the only rx8 owner on tst....


dont prove me wrong tho, let me endulge in my ignorance
:)

not any more 05 gt vr.

http://farm3.static.flickr.com/2010/2264538760_22712e8996.jpg

[i like rice]

VR crew~

[Omar_MSP]

Had a mazda6s as you can tell from my user name lol, but theres things about the car i miss. I also wont forget the difference in clutch from the 6 to the mechanical heavy duty clutch in the cobra. import clutches are like a feather lol

hey hey hey, you should try my excedy stage 1 clutch then buddy! :-p

[WRXD]

MS3 here! wow I havent been on TST in forever..:(

[Protege v2.5]

MS3 here! wow I havent been on TST in forever..:(

funny thing is I recognize most of the cars from 247

[Scrump]

Hola! Mazda Crew +1 I'm completely stock :D

[disstractin_FC]

FC here!! in the middle of ANOTHER damn heart transplant

[MS34ME!]

hello!

i saw a couple protege's when i was crusin to the sonic meet from bucks county... very nice indeed!

i'm about to install water\meth injection on my car, and go for a tune... who has the highest HP mazda?

[champ_6]

Mazda 6 here

[NOPSTNS]

i suuport u wanting to be different, a kl proteggie will be different. but choose another v6. the sheer cost of maintenance on them is annoying. its not a question of what gasket DOES leak, but what gasket DOESNT leak...

then again, mazda has made worse quality v6's....KJ cough cough....fords CY and CA...cough cough

[MS34ME!]

i need a headlight for my car... this sucks.

[FlashFive]

hello!

i saw a couple protege's when i was crusin to the sonic meet from bucks county... very nice indeed!

i'm about to install water\meth injection on my car, and go for a tune... who has the highest HP mazda?

were you the guy who was driving behind me on the way home? I was in the black p5, u revved your engine at me before we got on the highway.

[MS34ME!]

i might have been lol... i don't remember. i just got my DP in right before the meet (before i only had the cat back) and i was diggin' the new tone, so i would let people hear it's roar lol. i was taking it real easy tho driving down the turnpike tho...

[driftingrx5.7]

So where are we doing the all mazda meet?

in the poconos :D

[WRXD]

i might have been lol... i don't remember. i just got my DP in right before the meet (before i only had the cat back) and i was diggin' the new tone, so i would let people hear it's roar lol. i was taking it real easy tho driving down the turnpike tho...

where do you get your standback tuned?

what are your numbers so far?

I am about to port my wastegate-- boost creep is annoying as hell

[MS34ME!]

i did a street tune, and got it into ball park. i did street tune using the innovate LC-1 and knock light. i have some spiffy logging software\hardware that uses GPS and accelerometers so i can tell if i am accelerating .001g's faster. so, i think i'm pretty accurate. the bummer part of that is that is i don't know exact #'s, but what do those mean anyways? everyones dyno is different. i can say that i logged 12.7@ 113, and that was with a 2.5 60' on stock rubber. right now there is just too much power to the ground. when my water\meth setup is complete, i will be dyno tuning that, and i will be going down to cp-e in maryland to do so. they know **** tons about this car. with my economic stimulus check i am going to be getting RX-8 wheels and 245's. that should help the traction problem a little bit.

strange that you want to port your wastegate. it looks as tho i have more mods than you, and i do not have any problems with creep. my main problem was swapping that stock BPV, because i was leaking boost lol. i slapped on the forge, and used the standback and did P.I.D. tuning to tune my boost. i used to spike to 21 and settle to 17, now i only spike to 18 and settle at ~17.6 (right in the peak efficiency range of our snail). no problems with creep here...

http://i148.photobucket.com/albums/s24/paddedwallz85/Mazdaspeed%203%20GT/screenshotboost14.jpg

i showed TPS because our boost is controlled a lot by the throttle. it is wide open until it builds boost, and then it closes up lol. i showed average time between log points, because i found that i go from total vacuum to max boost in .6 seconds. thats fast....

if you have logs showing creep, put them up! i have not seen anyone with creep on MS3. i was considering porting my turbo while i had it disassembled to change the seals, but because there was no evidence of it being a problem i didn't waste my time.

[Outlawstar98]

I have a MSP, the only one in PA with a Evo Spoiler, well that i know of hhahaa

[static psi]

i have one.

[FlashFive]

I have a MSP, the only one in PA with a Evo Spoiler, well that i know of hhahaa

those things look sick on the msp, I know pirana on the mazda forums had on on his msp, thing looked sick!

[Omar_MSP]

those things look sick on the msp, I know pirana on the mazda forums had on on his msp, thing looked sick!
he had the supporting mods to make it secks, but if your just plain stock with the wing... uggh, looks a bit ricey. if you have the 18'' rims, front lip upgrade, and the proper ride height than were talking.

[FlashFive]

he had the supporting mods to make it secks, but if your just plain stock with the wing... uggh, looks a bit ricey. if you have the 18'' rims, front lip upgrade, and the proper ride height than were talking.

true, he had soooo much into that car, thing was sick.

[Omar_MSP]

i'm not trying to bash the guy, nore am i trying to tell anybody what to do.

but

some mods are best saved for later and invest on other things first... perhaps, lowering springs, wheel spacers, intake, exhaust, lip kit blah blah. you all know the story, some people tend to just leap towards the end of the list instead of starting from #1.

like i said, supporting mods makes a huge difference.

[WRXD]

i did a street tune, and got it into ball park. i did street tune using the innovate LC-1 and knock light. i have some spiffy logging software\hardware that uses GPS and accelerometers so i can tell if i am accelerating .001g's faster. so, i think i'm pretty accurate. the bummer part of that is that is i don't know exact #'s, but what do those mean anyways? everyones dyno is different. i can say that i logged 12.7@ 113, and that was with a 2.5 60' on stock rubber. right now there is just too much power to the ground. when my water\meth setup is complete, i will be dyno tuning that, and i will be going down to cp-e in maryland to do so. they know **** tons about this car. with my economic stimulus check i am going to be getting RX-8 wheels and 245's. that should help the traction problem a little bit.

strange that you want to port your wastegate. it looks as tho i have more mods than you, and i do not have any problems with creep. my main problem was swapping that stock BPV, because i was leaking boost lol. i slapped on the forge, and used the standback and did P.I.D. tuning to tune my boost. i used to spike to 21 and settle to 17, now i only spike to 18 and settle at ~17.6 (right in the peak efficiency range of our snail). no problems with creep here...

http://i148.photobucket.com/albums/s24/paddedwallz85/Mazdaspeed%203%20GT/screenshotboost14.jpg

i showed TPS because our boost is controlled a lot by the throttle. it is wide open until it builds boost, and then it closes up lol. i showed average time between log points, because i found that i go from total vacuum to max boost in .6 seconds. thats fast....

if you have logs showing creep, put them up! i have not seen anyone with creep on MS3. i was considering porting my turbo while i had it disassembled to change the seals, but because there was no evidence of it being a problem i didn't waste my time.

well as far as power mods go, you have the catted downpipe-- I am running fully catless-- would probably explain it. If I put a hi-flow on mine I probably wouldn't creep anymore.

dyno numbers only count if you have a baseline and keep going to the same dyno, which I plan on doing. Gotta sell some parts!

The the numbers I have posted in my sig isn't even my current setup, its the txs cai and the txs tbe-- I gained more power from the AEM intake than the txs.

[MS34ME!]

my buddy has a corksport catless DP and he doesn't have creep... i'm just sayin, i have never heard of people having a creep problem on their stock turbo, no matter what the exhaust. i decided to go catted, because at most i lose 5hp and i don't have to worry about emissions or CEL's.

where are you dynoing your car at? and on what kind of dyno? i'd like to show up and see what kind of #'s i'd throw down on the dyno your going to...

i've never talked to someone that bought the TXS CAI... how is it? how are the fuel trims of the AEM and TXS vs. stock? the mazdaspeed CAI leans the car out a lot, thats why it has large gains.

[WRXD]

my buddy has a corksport catless DP and he doesn't have creep... i'm just sayin, i have never heard of people having a creep problem on their stock turbo, no matter what the exhaust. i decided to go catted, because at most i lose 5hp and i don't have to worry about emissions or CEL's.

where are you dynoing your car at? and on what kind of dyno? i'd like to show up and see what kind of #'s i'd throw down on the dyno your going to...

i've never talked to someone that bought the TXS CAI... how is it? how are the fuel trims of the AEM and TXS vs. stock? the mazdaspeed CAI leans the car out a lot, thats why it has large gains.

I did my baseline and all of my subsequent runs at R/T Tuning. They use a DynoJet. I have not actually dynoed the AEM intake yet-- but w/ the TXS intake/TBE fuel trims seemed normal and went rich at WOT.

I didn't buy the txs intake-- they 'sponsored' me with some parts for testing purposes.

The txs downpipe is a full bellmouth to 3", to catless race pipe, to essentially a straight exhaust (no mufflers). The even the non catted corksport is a divorced style IIRC, which would still restrict flow.

at WOT in 6th I will spike up to the 20psi-- if it stays there for more than a few moments I am in boost-cuts ville

My next mod will be a FMIC for sure-- my stock IC was hot to the touch after only 1 run on the dyno--definitely holding me back a bit. That and a way to tune the bitch.

You should talk to Vince at R/T about getting your standback dyno tuned. I have yet to see someone actually get the standback tuned, most MS3 guys use it as an expensive boost controller.

[MS34ME!]

the divorced style DP does not add any sort of restriction, in fact it is superior to bell mouth designs, but most do not do it because it adds costs to a part. bell mouths create a lot of turbulant flow right at the turbo, which impeads flow. however were talking only a few HP here so it is usually better to go with who is cheaper.

do you have any logs showing boost creep? you have a DH, can you post pics of your logs showing creep?

your spiking to 20+ psi is due to your breathing mods. you need a tuning solution. stock boost controller does not know how to react with your new mods. this is common.

eventually i will be getting a free FMIC, but this won't be for a little while. water\meth will tie me over until then. Prepare on getting yourself a CDFP soon, otherwise you can add fuel cut to your problems. this is another reason i am putting water\meth injection on.

and like i said, i'm sure my road tune is right around where i want it (conservatively fast). i am going to CP-E in MD. to run on an inertia dyno to fine tune my ignition maps, and to have another tune for water\meth. Our motor\ecu is a tricky one, i have noticed a lot of weird quirks about it. but with DI, you can safely run 12.1 AFR's, which is nice. anyways, cp-e has a MS3 in house that they have spent 100's of hours on, so i will trust my car in their hands vs. some other guy that will be learning on it. i'm sure Vince is good tho, don't take what i said the wrong way.

and your right about people using the standback as expensive MBC's... thats why cobb will make a killing with the AP, because most people don't know **** about tuning nor do they care, they just wanna quick slap something on and be done with it. thats what this is all about now-a-days. they call this site "tristate tuners" but how many people actually tune their car? how many people know what AFR's and EGT's are? sad.

[WRXD]

the divorced style DP does not add any sort of restriction, in fact it is superior to bell mouth designs, but most do not do it because it adds costs to a part. bell mouths create a lot of turbulant flow right at the turbo, which impeads flow. however were talking only a few HP here so it is usually better to go with who is cheaper.

there is has never been any solid proof that a divorced wastegate or bellmouth dp makes more power or is better for a car. The Subaru guys have been arguing about this for years. Both designs have their positives/negatives but produce almost similar gains.

There is physically less interior volume in a divorced dp which is going to add more restriction (but less turbulence) any way you slice it. That part is just physics.

I sell performance parts for a living so I explain this to people every day. Hard core advocates of either design have never been able to produce and solid evidence that either way is better or makes more power.

Divorced downpipes are more expensive because they cost more to make-- they usually have to be individually welded instead of cast like bellmouths.

[MS34ME!]

turbulence itself is a restriction... and you didn't comment on anything else that i said... got any data logs?

[WRXD]

turbulence itself is a restriction... and you didn't comment on anything else that i said... got any data logs?

I will log some highway runs tomorrow

[MS34ME!]

.....

[WRXD]

It was really warm yesterday and I couldnt get it to cut-- but it did creep. If the turnpike wasnt so crowded I might have been able to, but I had to let off around 115-120

[MS34ME!]

are you talking about fuel cut? i don't remember you saying anything about fuel cut, only creep, and that is why you are going to port the wastegate... fuel cut does happen, but since i have tuned my standback i have yet to hit it. usually people will get cut after TBE and CAI, and some after an IC too.

EDIT: here is a data log of boost vs. wastegate DC. as you can see the wastegate isn't really working hard to hold the boost down...

http://i148.photobucket.com/albums/s24/paddedwallz85/Mazdaspeed%203%20GT/boostcreepithinknot.jpg

keep in mind this is before i did all my boost tuning. let me come up with a graph of after i did my boost tuning...

[MS34ME!]

alright dude, i made a few pretty graphs. boost spiking is a problem that you will see when you start adding breathing mods for this car. boost creep is a problem that i have never heard of on the MS3, no matter what downpipe people have. true, i do have a cat, but it is high flow and only subtracts 5hp vs an cat-delete DP from cp-e. i very highly doubt that little bit of restriction is going to prevent creep in my case. the spiking after you add mods is not a hardware problem, i.e. the wastegate not letting enough exhaust bypass the turbo. it is more of a software problem, because of the aggressive onset of boost mazda programs into the ECU for eliminating lag. a tuning solution will get rid of your boost spike issue, although i can only vouch for the standback and not what other people have done with XEDE or whatever. in my graphs i show throttle position sensor along with boost, because the ECU uses TPS to control the onset of boost more than it does the WG.

here is boost vs. TPS and boost vs WG DC, when i was untuned. this log was done doing a hard acceleration from 1st to 5th gear.

http://i148.photobucket.com/albums/s24/paddedwallz85/Mazdaspeed%203%20GT/untunedboostvsTPS.jpg

http://i148.photobucket.com/albums/s24/paddedwallz85/Mazdaspeed%203%20GT/untunedboostvswastegate.jpg

crazy how that TPS follows the curve of PSI, eh? lol

here are tuned boost logs. I don't know how others do it, but the standback uses PID tuning to control boost. it does a good job, i'd have to say. I tuned this by doing 5th gear pulls on the highway. i would start at 2500RPM, and floor it, staying in boost for a couple seconds. you will see the WG actually closing up!

http://i148.photobucket.com/albums/s24/paddedwallz85/Mazdaspeed%203%20GT/boostvsTPS.jpg

http://i148.photobucket.com/albums/s24/paddedwallz85/Mazdaspeed%203%20GT/boostvswastgateDC.jpg

i hope this stops you from wasting your time porting the WG. i'm not going to say there won't be benefits to doing this, but def not until you get a tuning solution. if your going to port something, port the inlet and the throttle body. i have heard people getting good response from doing this.

i'm looking forward to seeing your logs... maybe we should get a mod to move this all into a new topic? we have taken this topic on quite the tangent...

[amp]

so when and where is this meet....

[FlashFive]

no meet has been set yet but i am working with a kid on another forum to set something up for an all mazda meet

[Ki||ian]

Just moved to the West Chester area of PA a week ago. This would be my P5 tearin up the streets!

Just add blacked out head lights and projectors w/ HID and thats what it looks like right now. For the moment I am rollin with no grill cause I am waiting for my DG one to get here.

http://farm3.static.flickr.com/2178/2350836868_6dd5745d4a.jpg

http://farm3.static.flickr.com/2149/2350002313_cb7a931325.jpg

http://farm3.static.flickr.com/2246/2350002597_f1da1e93b7.jpg

[FlashFive]

i really gotta black out my headlights soon

[BradC]

03.5 lip looks nice on your p5 man.

[disturbedfan121]

i'm right here

[protege_kid]

did i hear mazda meet?

sorry, i had to get one more post in b4 i was aloud to post a link :lol:

[protege_kid]

all right so im the kid flash5 mentioned about trying to set up a all mazda meet....

heres the info for the the most part

http://www.mazdas247.com/forum/showthread.php?t=123704442

cost per person will be announced wen we get a definite number of people

if you guys are members of mazdas247 then add your selves to the list if yous are intrested...those who arent may PM myself or flash5 and we will add you....this is still a just mazda meet btw

questions? comments? concerns?
just get at the kid

[93rx7r1]

I own a 1993 Mazda RX7

[i like rice]

Don't see many silver RX7s around. Nice!

[93rx7r1]

Don't see many silver RX7s around. Nice!

Thank you, but I think it is going to become a yellow (Competition Yellow Mica) at some point.....When I get the cash together to get it repainted, but that is not up high on the mods list right now.

[Gil]

My opinion,paint it if youre going to keep it for good.Once you go CYM and go try and sell it,its going to be a turn off for the 3rd gen freak when he finds out it wasnt an original CYM.Just my opinion but either which way,nice car and welcome!

[Omar_MSP]

all right so im the kid flash5 mentioned about trying to set up a all mazda meet....

heres the info for the the most part

http://www.mazdas247.com/forum/showthread.php?t=123704442

cost per person will be announced wen we get a definite number of people

if you guys are members of mazdas247 then add your selves to the list if yous are intrested...those who arent may PM myself or flash5 and we will add you....this is still a just mazda meet btw

questions? comments? concerns?
just get at the kid

sucks i work that day, i gotta save my vacation time for august.

[93rx7r1]

My opinion,paint it if youre going to keep it for good.Once you go CYM and go try and sell it,its going to be a turn off for the 3rd gen freak when he finds out it wasnt an original CYM.Just my opinion but either which way,nice car and welcome!

I plan on keeping it. I love this car! Plus I have sunk WAY too much money into already that I would never get back out of it. And actually this car was repainted once before already, before I got it. It used to be brilliant black (It's a R1 & they only came in black, red or CYM - I think).

[amp]

...its going to be a turn off for the 3rd gen freak when he finds out it wasnt an original CYM...
keep it silver or just go buy a true cym...

[M.V.'s FD]

keep it silver or just go buy a true cym...

+1 on that one...I got a VR that I considered changing to BB but eventhough I've owned it for 10 years and doubt I'll sell I stuck with the OEM color(at higher cost).
These cars were sold in VERY LIMITED numbers in the U.S. Most of us have modded them beyond believe and top it all off some of them have been desecrated by V8s and show/no go trailler QUEENS.

I dont have a collector's FD but it holds true to the mold! A fast, nimble sports cars with a boatload of compromise to eclipse all else in performance!!!!!

BTW, I figured you'd say that Gio...Coming from a guy with OEM CYMs!!!!
oops did I let the cat out of the bag?? :lol:

[amp]

..I dont have a collector's FD but it holds true to the mold!..
any fd is a collector these days... so many of em bein trashed..
didnt realize you were on here..

[Protege v2.5]

Ok so we got a lot of mazdas on here. Lets get a tally of what everyone drives.
We'll do it like so. Just as your name to the list under your car.

Protege
1. Protege v2.5(BJ)

Miata

Rx7

Mx6

3

6

[93rx7r1]

Protege
1. Protege v2.5(BJ)

Miata

Rx7
1. 93rx7r1

Mx6

3

6

[disturbedfan121]

Protege
1. Protege v2.5(BJ)

Miata
1. disturbedfan121

Rx7
1. 93rx7r1 (Troy)

Mx6

3

6

[Protege v2.5]

Protege
1. Protege v2.5(BJ)

Miata

Rx7
1. 93rx7r1 (Troy)

Mx6

3

6


The (BJ) is the Chassis code, Not my name haha. Figured it'd be better to do it that way than a seperate one for each.

[93rx7r1]

The (BJ) is the Chassis code, Not my name haha. Figured it'd be better to do it that way than a seperate one for each.

Oops......LOL show you how much I know about the Proteges then huh! LOL.

[the mike]

1. Protege v2.5(BJ)

Miata
1. disturbedfan121

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)

Mx6

3

6

[skeppley]

Sorry guys, haven't been on here in awhile.
Just had a baby, so it's been taking up a lot of my car time.
Here are my mazdas:
Rx7 for me
Miata for the lady
CX7 Turbo for the family trips :)

Hope to meet up with you guys this year.
Hey 93rx7r1, I sent you an email!


http://i259.photobucket.com/albums/hh304/skeppley/Car/3%20cars/RXNside2.jpg

http://i259.photobucket.com/albums/hh304/skeppley/Car/3%20cars/miata.jpg

http://i259.photobucket.com/albums/hh304/skeppley/Car/3%20cars/CX7.jpg

[protege_kid]

we are still looking for mazdas for the meet on May 25th

[Outlawstar98]

1. Protege v2.5(BJ)
2. Outlawstar98

Miata
1. disturbedfan121

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)

Mx6

3

6




he had the supporting mods to make it secks, but if your just plain stock with the wing... uggh, looks a bit ricey. if you have the 18'' rims, front lip upgrade, and the proper ride height than were talking.

Well i found a evo8 spoiler in black for cheep so i had to jump on it and get it, than i bought the CF trunk so i can mount it, im working on getting Tein SS Coilovers and 18' Rims ATM (have payment on a FMIC and Turbo Mani so its going to be about a month b4 i even order them sadly) & im getting the DGM Frount CF Lip also, but its the money issue

[95nracer]

1. Protege v2.5(BJ)
2. Outlawstar98

Miata
1. disturbedfan121

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)

Mx6

3

6

[amp]

ill try and make it.. not sure which to bring though...

[FlashFive]

ill try and make it.. not sure which to bring though...

amp if u could go on to the original thread here:
http://www.mazdas247.com/forum/showthread.php?t=123704442

and just put your name down or atleast post saying u can come and ill add you, idk if your on mazdas24/7 but if your not just sign up and then post!

[arkadyzv]

I have 2 7's. 88 vert getting the el es juan once I get rid of my lease and a new daily, white 89 gtu. Also interested in the mazda meet if that happens.

[champ_6]

1. Protege v2.5(BJ)
2. Outlawstar98

Miata
1. disturbedfan121

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)

Mx6

3

6
1. Champ_6 (Tyler)

[FlashFive]

I have 2 7's. 88 vert getting the el es juan once I get rid of my lease and a new daily, white 89 gtu. Also interested in the mazda meet if that happens.

well go to the link and post so i can add u to the list!!!!!

[disstractin_FC]

1. Protege v2.5(BJ)
2. Outlawstar98

Miata
1. disturbedfan121

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)

Mx6

3

6

[DexterZX2_Mz3]

I have a 07 Mazda 3 Grand Touring in Aurora Blue Mica. It's my daily driven car for my travels back and forth to work. I really love this car. It looks good, has decent power and gets good gas milage. It also came fully loaded with everything but the navigation. I couldn't ask for anything more.

http://i59.photobucket.com/albums/g292/dexterzx2/Mazda%203/PICT0223.jpg
http://i59.photobucket.com/albums/g292/dexterzx2/Mazda%203/PICT0225.jpg
http://i59.photobucket.com/albums/g292/dexterzx2/Mazda%203/DSC05159.jpg

[atenzany62]

i'm a big mazda fanboy =) especially when it comes to all 4 mazdaspeeds, i had a mazda6 but shes gone now and i miss her so much, looking to get a 2g dsm now

[grmreapr]

I have a silver 02 protege es as my dd and a s13 for the weekends

[mojo audi]

Hey guys just thought I'd say what's up since I'm back in my mazda now. I have a Mazdaspeed6 with a TBE, intake, asa wheels, carbon fiber hood and trunk and what not. Any mazda meets in the area?

[FlashFive]

a few of us are having a mazda meet on the 25th in allentown, check out the lvgp thread if you want in

[Outlawstar98]

1. Protege v2.5(BJ)
2. Outlawstar98 (Kyle)

Miata
1. disturbedfan121

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)

Mx6

3

6
1. Champ_6 (Tyler)


Updated it better cause someone got missed! lol

[Cardriverx]

1. Protege v2.5(BJ)
2. Outlawstar98 (Kyle)

Miata
1. disturbedfan121
2. Cardriverx (Steve)

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)

Mx6

3

6
1. Champ_6 (Tyler)

[disstractin_FC]

Are any of u guys going to the BBQ meet in Maryland???

[Protege v2.5]

Protege
1. Protege v2.5(Mike)
2. Outlawstar98 (Kyle)

Miata
1. disturbedfan121
2. Cardriverx (Steve)

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)

Mx6

3

6
1. Champ_6 (Tyler)

[93rx7r1]

Hey Mike sorry there....I kinda messed up your thing and got everyone putting in their names.....LOL......my bad!

[Protege v2.5]

LOL......yeah I figured I'd join the crowd,

[fc3spower]

another 7 here!

[turbotim]

Protege
1. Protege v2.5(Mike)
2. Outlawstar98 (Kyle)

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)

Mx6

3

6
1. Champ_6 (Tyler)

[FlashFive]

Protege
1. Protege v2.5(Mike)
2. Outlawstar98 (Kyle)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)

Mx6

3

6
1. Champ_6 (Tyler)

[DexterZX2_Mz3]

Protege
1. Protege v2.5(Mike)
2. Outlawstar98 (Kyle)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)

Mx6

3
1. DexterZX2_Mz3 (Tim)

6
1. Champ_6 (Tyler)

[fc3spower]

Protege
1. Protege v2.5(Mike)
2. Outlawstar98 (Kyle)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)

Mx6

3
1. DexterZX2_Mz3 (Tim)

6
1. Champ_6 (Tyler)

[Rotary Knight]

Protege
1. Protege v2.5(Mike)
2. Outlawstar98 (Kyle)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)

Mx6

3
1. DexterZX2_Mz3 (Tim)

6
1. Champ_6 (Tyler)






Also got 2 1st gen MPVs, one SERIOUSLY needs some new lifters, and the other is going to need new lifters hahaha.

[fc3spower]

hahaha

[FazdaGt]

can i join the club on the technicality that my car has a mazda driveline?

pretty please?

[wheresmycar]

*meep meep*

I need a stronger sounding horn :)

[garrettej8]

there should be a recall on the MS3 horn, it's weak.

anyway, add me to the list :thumbup:

[93mx620]

got an mx-6 here:thumbup:

[FlashFive]

add yourselves to the list!

[Protege v2.5]

Lol......

[CleanNeon98]

Protege
1. Protege v2.5(Mike)
2. Outlawstar98 (Kyle)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)

Mx6

3
1. DexterZX2_Mz3 (Tim)

6
1. Champ_6 (Tyler)

[Zeropistonz]

I got an FD (rx7) and FE (rx8) as my DD.

-Kevin

[dwl137]

Guess I should add my name in on here now. I bought a 2008 MX-5 Miata GT a month ago.

Protege
1. Protege v2.5(Mike)
2. Outlawstar98 (Kyle)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

Rx7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)

Mx6

3
1. DexterZX2_Mz3 (Tim)

6
1. Champ_6 (Tyler)

[Dave 88 A.E]

I thought I posted in this thread early on or maybe it was just the rx7/rx8 thread.

I have an 85 widebody rx7 and an 88 10th Anniversary T2.


Ill have to get my buddy to sign up he is supposed to be picking up a Protege mp3 in the next couple weeks.

[2MCHPWR]

Protege
1. Protege v2.5(Mike)
2. Outlawstar98 (Kyle)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt

3
1. DexterZX2_Mz3 (Tim)

6
1. Champ_6 (Tyler)

[amp]

Protege
1. Protege v2.5(Mike)
2. Outlawstar98 (Kyle)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt

3
1. DexterZX2_Mz3 (Tim)

6
1. Champ_6 (Tyler)

Mazdaspeed6
1. amp

[Outlawstar98]

Oh... if amp is going to do it that way haha,


Protege
1. Protege v2.5(Mike)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt

3
1. DexterZX2_Mz3 (Tim)

6
1. Champ_6 (Tyler)

Mazdaspeed6
1. amp

[Spellbinder]

Protege
1. Protege v2.5(Mike)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt

3
1. DexterZX2_Mz3 (Tim)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp

[jrdellecker21]

msp #209

[driftingrx5.7]

Protege
1. Protege v2.5(Mike)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt

3
1. DexterZX2_Mz3 (Tim)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[arkadyzv]

Protege
1. Protege v2.5(Mike)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt

3
1. DexterZX2_Mz3 (Tim)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[WRXD]

Protege
1. Protege v2.5(Mike)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[WRXD]

I think the 'speed Miatas should get their own section

[Omar_MSP]

Protege
1. Protege v2.5(Mike)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[Erik]

just picked up a 5speed 97 protege for 3k

Protege
1. Protege v2.5(Mike)
2. Erik(Erik)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[Bubba Ho-Tep]

Aaron isn't the only MS3.

[FlashFive]

Aaron isn't the only MS3.

they probably just dont come into this section at all

[Zapata2119]

just picked up a 5speed 97 protege for 3k

Protege
1. Protege v2.5(Mike)
2. Erik(Erik)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt
2. zapata2119

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

i'll be moving back to Delaware in a couple weeks................. 1 of like 5 mazdaspeed mx6's in the country (wish it was original though)

http://img70.imageshack.us/img70/7220/dscf1863mt1.jpg (http://imageshack.us)

http://img411.imageshack.us/img411/7110/dscf1864qb9.jpg (http://imageshack.us)

[WRXD]

Aaron isn't the only MS3.


add yourself up!

1 of like 5 mazdaspeed mx6's in the country

They made a Mazdaspeed MX-6? or did you just put the badge on there?

[95nracer]

I think he meant a conversion to make it look like the Mazdaspeed MX6. They did make them overseas.



Did you get the Mazdaspeed exhaust with the badge on it? What else is different about the Aspec vs Jspec versions? Suspension and frame/body braces? Do you have the electronic folding mirrors?

[461_SS]

Protege
1. Protege v2.5(Mike)
2. Erik(Erik)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt
2. zapata2119
3. 461_SS (Rich)< Probe :lol:

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[Outlawstar98]

Lol @ 461_SS


Well the First TRUE mazdaspeed from what i know was the Protege Teehee

[garrettej8]

I haven't viewed this part of the forum before but I added myself to the list


Protege
1. Protege v2.5(Mike)
2. Erik(Erik)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt
2. zapata2119
3. 461_SS (Rich)< Probe :lol:

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)
2. garrettej8 (Garrett)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[justinlansdale]

Protege
1. Protege v2.5(Mike)
2. Erik(Erik)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)
3. justinlansdale (Prod #2671)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. Cleanneon98 (MSM)
5. dwl137 (Derek)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt
2. zapata2119
3. 461_SS (Rich)< Probe

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)
2. garrettej8 (Garrett)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[CleanNeon98]

I should fix the list a bit

Protege
1. Protege v2.5(Mike)
2. Erik(Erik)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)
3. justinlansdale (Prod #2671)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. dwl137 (Derek)

Mazdaspeed Miata
1. Cleanneon98 #2373 (Alex)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt
2. zapata2119
3. 461_SS (Rich)< Probe

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)
2. garrettej8 (Garrett)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[BradC]

Protege
1. Protege v2.5(Mike)
2. Erik(Erik)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)
3. justinlansdale (Prod #2671)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. dwl137 (Derek)
5. BradC

Mazdaspeed Miata
1. Cleanneon98 #2373 (Alex)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt
2. zapata2119
3. 461_SS (Rich)< Probe

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)
2. garrettej8 (Garrett)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[Dave 88 A.E]

Protege
1. Protege v2.5(Mike)
2. Erik(Erik)

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)
3. justinlansdale (Prod #2671)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. dwl137 (Derek)
5. BradC

Mazdaspeed Miata
1. Cleanneon98 #2373 (Alex)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)
13. Dave 88 A.E, 10th anniversary fc
14. Dave 88 A.E, 1985 gsl-se widebody

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt
2. zapata2119
3. 461_SS (Rich)< Probe

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)
2. garrettej8 (Garrett)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[Zapata2119]

I think he meant a conversion to make it look like the Mazdaspeed MX6. They did make them overseas.



Did you get the Mazdaspeed exhaust with the badge on it? What else is different about the Aspec vs Jspec versions? Suspension and frame/body braces? Do you have the electronic folding mirrors?

the wing is the most drastic change it's an actual mazdaspeed mx6 wing available only in japan also the klze 200 bhp engine that's in it i have a custom exhaust on it so didn't bother with the original mazdaspeed i think one person has it on mx6.com and it's only axle back but only the muffler is stamped mazdaspeed. i live in pittsburgh right now so not putting the lip on it. i have the jdm front end on it as well as taillights headlights and foglights the power folding mirrors i haven't put on yet either and thanks for reminding me cause they're at a friends lol

as for the mazdaspeed mx6 rims i doubt i'll ever find them i like the fd's on it personally. i haven't done anything with suspension on the car yet except for a rear strut bar there is mazdaspeed shocks for it but they are a neon green and no springs but i think corksport still sells them

the full mazdaspeed lip kit is next to impossible to find some have been fortunate to find the side skirts but the rear add ons no one has

me i'm happy with just the lip now

is it a true mazdaspeed no but it's pretty close

and there is only about 5 or 6 other ones that are all jdmed out

sorry for late response

[Zapata2119]

Lol @ 461_SS


Well the First TRUE mazdaspeed from what i know was the Protege Teehee

in america that is correct heres a pic of mazdaspeed mx6

without wheels
http://img185.imageshack.us/img185/8171/jjx7772002img600x450116ju9.jpg (http://imageshack.us)

with wheels
http://img247.imageshack.us/img247/7158/mx603qc6.jpg (http://imageshack.us)

[biz]

Protege
1. Protege v2.5(Mike)
2. Erik(Erik)

MP3
1. biz

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)
3. justinlansdale (Prod #2671)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. dwl137 (Derek)
5. BradC

Mazdaspeed Miata
1. Cleanneon98 #2373 (Alex)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)
13. Dave 88 A.E, 10th anniversary fc
14. Dave 88 A.E, 1985 gsl-se widebody

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt
2. zapata2119
3. 461_SS (Rich)< Probe

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)
2. garrettej8 (Garrett)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)

[toplessFC3Sman]

the only rx7 vert on the board :)

not anymore...

[driftingrx5.7]

not anymore...

hahaha i am stealing your sig!

[FlashFive]

nice to finally see an mp3 show up

[toplessFC3Sman]

May as well add myself to the list too i guess.

Protege
1. Protege v2.5(Mike)
2. Erik(Erik)

MP3
1. biz

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)
3. justinlansdale (Prod #2671)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. dwl137 (Derek)
5. BradC

Mazdaspeed Miata
1. Cleanneon98 #2373 (Alex)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)
13. Dave 88 A.E, 10th anniversary fc
14. Dave 88 A.E, 1985 gsl-se widebody
15. ToplessFC3Sman, 1988 RX-7 Convertible

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt
2. zapata2119
3. 461_SS (Rich)< Probe

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)
2. garrettej8 (Garrett)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)
biz is online now Report Post Reply With Quote

[driftingrx5.7]

wow you have an 88 red vet to??

[toplessFC3Sman]

yep, turbo-swapped... although I was pretty close to throwing an LS1 in there, the turbo rotary won out since I was able to get one for cheaper, more quickly.

[driftingrx5.7]

don't have to get an ls1 lt1 is just fine :)

[toplessFC3Sman]

If i went the V8 route, I wanted the aluminum block to try to keep the weight approx the same; plus LS1-T56 combos pop up for sale at a decent price sometimes, so i could get a comparative deal on the trans too.

[Snippy]

Protege
1. Protege v2.5(Mike)
2. Erik(Erik)

MP3
1. biz

MazdaSpeed Protege
1. Outlawstar98 (Kyle D. Prod.# 602)
2. Omar MSP (Prod # 1192)
3. justinlansdale (Prod #2671)

Protegé 5
1. FlashFive

Miata
1. disturbedfan121
2. Cardriverx (Steve)
3. TurboTim
4. dwl137 (Derek)
5. BradC

Mazdaspeed Miata
1. Cleanneon98 #2373 (Alex)

RX-7
1. 93rx7r1 (Troy)
2. the mike (mike)
3. 95nracer (Jerry)
4. disstractin_Fc (Rey)
5. fc3spower(justin)
6. Rotary Knight (Bun, doubt anybody here can say my full name...)
7. 2MCHPWR (Scott)
8. Zeropistonz (Kevin)
9. amp
10. amp
11. driftingrx5.7 (Shaun)
12. arkadyzv (Arkady)
13. Dave 88 A.E, 10th anniversary fc
14. Dave 88 A.E, 1985 gsl-se widebody
15. ToplessFC3Sman, 1988 RX-7 Convertible
16. Snippy, 1993 touring (Rc)

RX8
1. Zeropistonz (Kevin)

Mx6/ Probe:
1. FazdaGt
2. zapata2119
3. 461_SS (Rich)< Probe

3
1. DexterZX2_Mz3 (Tim)

Mazdaspeed3
1. WRXD (Aaron)
2. garrettej8 (Garrett)

6
1. Champ_6 (Tyler)
2. Spellbinder

Mazdaspeed6
1. amp
2. driftingrx5.7(Shaun)
biz is online now Report Post Reply With Quote

[NOPSTNS]

how have i been forgotten already. when ppl think TSt and RX8 in the same sentence...only one name comes up....MEEEEEEEEEEEEE

and then other words are uttered and its not work safe so ill avoid...

[Outlawstar98]

in america that is correct heres a pic of mazdaspeed mx6

without wheels
http://img185.imageshack.us/img185/8171/jjx7772002img600x450116ju9.jpg (http://imageshack.us)

with wheels
http://img247.imageshack.us/img247/7158/mx603qc6.jpg (http://imageshack.us)

The first Mazdaspeed was the Protege, before that there was a Indapendent racing team that was called MazdaSpeed before mazda took them over, anything before the MSP was not a MazdaSpeed, you can say. You could call it a Mazdaspeed but it wasnt badged with Mazdaspeed,



"
MAZDASPEED factory-engineered vehicles, performance parts and accessories, and motorsports programs are the ultimate expression of our Always the Soul of a Sport Car spirit. MAZDASPEED is the destination for driving enthusiasts who desire to experience Mazda at the highest, most exhilarating level.

MAZDASPEED's own grass-roots racing heritage is as authentic as it gets. It traces its origin to an independent racing team in 1967 under the name "Mazda Sports Corner" at Mazda Auto Tokyo, Japan's largest Mazda dealer. Impressed by performance potential of the Cosmo 110S, the sleek two-seat sports car marked the debut of the first-ever production rotary engine, the team ambitiously set out to establish a Mazda presence at major motorsports events worldwide. At the same time, Mazda was interested in proving the viability of its rotary engine to the world. The two goals came together with the racing team's 1968 international debut, fielding two Cosmos at the Nordshleife, Nuerburgring for the "Marathon de la Route," an incredibly grueling 84-hour endurance event. The surprise came when the little Cosmo took fourth place, a great achievement for a new racing team and a new car with completely new engine technology.

Over the next 15 years, the team of hardcore Mazda racers campaigned across the U.S., Japan and Europe in both endurance and conventional sports car events. After Mazda replaced the Cosmo with the more practical R100, Europeans watched in awe as two of the boxy hatchbacks dogged four Porsche 911s for 24 hours at the Spa-Francorchamps in Belgium, claiming class wins and fifth and sixth place overall.

As Mazda launched new models, Mazda Sports Corner raced them. After the Cosmos and R100s came racing RX-2s and RX-3s. Everything then jumped up a notch or two when Mazda introduced the first RX-7 in 1978. Here was a car that would succeed in a variety of classes and, most noticeably in the U.S., would achieve an unprecedented 100 wins over the next 12 years in the International Motor Sports Association (IMSA) Series.

In 1983, Mazda Motor Corporation brought the racing team from Tokyo to the company's corporate headquarters in Hiroshima to help drive Mazda's factory racing ambitions, and it was here that the MAZDASPEED name was born.

Now under the Mazda umbrella, MAZDASPEED continued to receive recognition for its amazing on-track performance and its many victories around the globe. Sights were turned to the 24 Hours of Le Mans. Privateers had raced Mazdas through the seventies, but MAZDASPEED had decided that it was time to join the fray. The eighties saw some class wins, and then in 1991, the MAZDASPEED team succeeded in doing what no other Japanese auto maker before or since has been able to accomplish: capturing the overall win at the world's most prestigious endurance race.

Fearing a long-standing technical single-brand dominance, FIA outlawed rotary engines after the 1991 Le Mans race. Unable to race Mazda's trademark rotary engine in the world's most prestigious venue, MAZDASPEED began focusing more on the business side of motorsports and started developing and building aftermarket parts and accessories, while continuing grassroots motorsports initiatives.

By this time, it was clear that a disproportionate number of Mazdas were appearing and winning in small owner-driver sports car events all over the world, and that this was where Mazda truly belonged and should focus its competitive efforts.

In 1999, Mazda Motor Corporation took full control of MAZDASPEED and has used its talents to supply racing parts and serve as an umbrella for all of Mazda's motorsports activities. The natural extension of this was to serve the Mazda street enthusiast as well, which MAZDASPEED has done with an expansion of its parts catalog and now with the development of MAZDASPEED-factory-engineered models sold in Mazda showrooms.

With the introduction of models such as the MAZDA6, MAZDA3 and RX-8, it is more clear than ever that Mazda truly does infuse its products with the "soul of a sports car." MAZDASPEED is the highest expression of that soul.

"


From MazdaUSA.com

Teehee

[Zapata2119]

like i said in the usa the protege was the first the protege was not the first in japan

http://www.mx6.com/forums/2g-mx6-general/215922-mazdaspeed-mx6-guide-w-pictures.html

info on parts

[Rpine422]

P5 here... Just joined the site and I'm glad there is a mazda thread.

[oneday]

Miata owner here. Slow in a straight line, but sure footed and fun in the twisties.

[Outlawstar98]

like i said in the usa the protege was the first the protege was not the first in japan

http://www.mx6.com/forums/2g-mx6-general/215922-mazdaspeed-mx6-guide-w-pictures.html

info on parts

says stuff about parts, but ive been looking online, it doesnt say anywhere that its all factory and is installed in the factory to make a a True Factory built Mazdaspeed, cause at first Mazdaspeed was just a department makeing parts for the Mazda's.

"After the FIA effectively outlawed the Wankel engine the next year, the Mazdaspeed team turned away from professional racing and focused instead on enabling third-party competition of Mazda vehicles. Mazda assumed control of Mazdaspeed in 1999 as a tuning and performance parts operation within the company. In 2003, Mazda debuted its first consumer offered Mazdaspeed vehicle, the 2003 Mazdaspeed Protegé"

That is waht it says on Wiki, so they made the parts, but didnt havea True Mazdaspeed from the factory till the MSP.

[olmytsi]

Anyone here interested in a set of red MAZDASPEED seatbelt pads?

[disturbedfan121]

any fast mazda's on here? like low 13's or lower?

[garrettej8]

mine trapped 104 with just an intake... that's mid 13's or so with a good '60 foot (which I can't seem to get with the stock bridgestones)
it's not a drag racing car though, it's more fun in the turns

[disturbedfan121]

mine trapped 104 with just an intake... that's mid 13's or so with a good '60 foot (which I can't seem to get with the stock bridgestones)
it's not a drag racing car though, it's more fun in the turns

lol i get that, do you really think miata's are straight line cars?? lol

i was just wondering if anyone has one, what do you have btw?

EDIT: nvm figured it out

[FlashFive]

P5 here... Just joined the site and I'm glad there is a mazda thread.

damn right, nice to see another one on here, you got anything done to her yet? mt or at?

[Outlawstar98]

Flash isnt alone anymore!! HAHA

[JSpecV03]

question i need an answer to, maybe you guys can help. a dude with an 03 protege es with intake, 4-1 header, and exhaust is claiming an odd number of HP. its the 2.0 engine with the 5spd tranns. what motor code is this and what should this car be making with that set up? brad or omar you guys might be able to answer this,

[lostsoulx316]

well from where i get is its only 113 whp and 121 tq lol something no right i think

[AxelaChill]

New guy with a 3 here!

[drew32]

any fast mazda's on here? like low 13's or lower?



13.1 here. Hoping for a 12.9 next time I think my 7 can do it!!

[Fatti03MSP]

hay whats up guys, saw you guys talking about this site on 24/7 figured i would check, forgot i was already a member lol

[Protege v2.5]

question i need an answer to, maybe you guys can help. a dude with an 03 protege es with intake, 4-1 header, and exhaust is claiming an odd number of HP. its the 2.0 engine with the 5spd tranns. what motor code is this and what should this car be making with that set up? brad or omar you guys might be able to answer this,

If he is claiming anything more than 105-115 than he doesnt really know and is probably adding possible gains from each mod to his stock hp...lol.

[JSpecV03]

If he is claiming anything more than 105-115 than he doesnt really know and is probably adding possible gains from each mod to his stock hp...lol.

well he told me and lostsoulsx has heard this to, but he "claims" he put down 200whp n/a....impossible. i have 162 whp and i pull like 2 busses on him everytime.

[SpEcRv9]

well he told me and lostsoulsx has heard this to, but he "claims" he put down 200whp n/a....impossible. i have 162 whp and i pull like 2 busses on him everytime.

lulz @ him...i see him around all the time and wait for him to try and run me lol.

[JSpecV03]

lulz @ him...i see him around all the time and wait for him to try and run me lol.

hahaha...yeah he said he sees you at the pizza shop right by the exxon station, germantown pkm and penn sq. rd. he lives back there. you'd own him. when i was only i/e i would still burn him by a long shot.
now my cars running good with 100k on it lol, and 20 more whp i wanna run him again soon. see how far i pull on him

[motorvated]

1990 1.6 5 speed miata here. I have a full exhaust and coilovers. Its slow as hell, but I dont need it for speed. However, im planning on boosting it in the next year. I'll be happy with 200whp.

[xojoce]

Mazda 3 here.
Soon to be having a mazdaspeed3 =)

[Omar_MSP]

Mazda 3 here.
Soon to be having a mazdaspeed3 =)

get the white one! :cool:

[xojoce]

get the white one! :cool:

I am! That's the only color I will get. There's not many colors to choose from, but everyone has a black one, metrosexual gray.. I never really see true red or pearl white, but I haven't seen anyone driving around a white speed3 yet in my town.

[CleanNeon98]

I am! That's the only color I will get. There's not many colors to choose from, but everyone has a black one, metrosexual gray.. I never really see true red or pearl white, but I haven't seen anyone driving around a white speed3 yet in my town.
LOL, I just found a new color for my car!

[TalonTsi97]

Any Mazda's need steelies with snow tires for the upcoming winter? http://www.tristatetuners.com/forum/showthread.php?t=66532

[xojoce]

LOL, I just found a new color for my car!

what color?

[xojoce]

K, So I don't know if I'm putting this in the right thread but since I have a mazda.. i'm just wondering if anyone can tell me why it does this sh*t
1: When the gas is above half tank, it takes off & drives perfectly; but when it's just getting below half tank, it starts to drive like ****.. I can put the pedal to the floor and it feels like it's not going anywhere at all.
2: Sometimes it'll start jumping forward.. even if i'm at a complete stop, it'll just jump?

=/

[disturbedfan121]

stop using regular.

[xojoce]

stop using regular.

ive always used plus.

[disturbedfan121]

start using super. check plugs, wires, fuel filter. find someone who has access to ALLDATA and check for all recall's etc...

[xojoce]

I used to use super and it would still drive like **** for me, like it would never take off.. you know? then when I started using plus, it ran a lot better.. so weird, right? Sounds good, thanks :)

[WRXD]

any fast mazda's on here? like low 13's or lower?

My car should be good for low 13s if I could learn to launch the thing.


Hey- I want to invite all you local Mazdas to the JSC Speed monthly car meet-- the next one is happening Nov 11th at 7pm. We gotta get more mazdas out to represent-- we only had a few last time.

Lets outnumber the subies this month!
JSC Speed Monthly Car Meets! (http://www.tristatetuners.com/forum/showthread.php?t=64568)
Photos from JSC meet, 10/7/08 (http://www.tristatetuners.com/forum/showthread.php?t=65140&highlight=JSC+Speed)

[axelaspeed]

http://farm4.static.flickr.com/3287/2966607216_d6fe40d3f2.jpg

checkn in!!!

[ally]

i have a mazda :)

[Fatti03MSP]

My car should be good for low 13s if I could learn to launch the thing.


Hey- I want to invite all you local Mazdas to the JSC Speed monthly car meet-- the next one is happening Nov 11th at 7pm. We gotta get more mazdas out to represent-- we only had a few last time.

Lets outnumber the subies this month!
JSC Speed Monthly Car Meets! (http://www.tristatetuners.com/forum/showthread.php?t=64568)
Photos from JSC meet, 10/7/08 (http://www.tristatetuners.com/forum/showthread.php?t=65140&highlight=JSC+Speed)

i should be there in the spring, all the tracks are closed in Pittsburgh and i never got a chance to hit up strip this year.

[justinlansdale]

http://i92.photobucket.com/albums/l5/justinlansdale/mspeezynight4.jpg

i'm here! haha

[disturbedfan121]

http://www.ciottiindustries.com/gallery/Meets%26Shows/BestBuy9-30-08/Meet17.jpg

[garrettej8]

disturbedfan121... that looks fun lol. have you ever weighed your car?

[disturbedfan121]

with full interior, rollbar, full tank of gas,etc....2400lbs~

when next season come it's getting fully gutted. which is ~1950lbs

[garrettej8]

I found a sick video of a gt35r rx-7. it sounds awesome

http://www.youtube.com/watch?v=Ty85qzSQKcE&feature=related

[Fatti03MSP]

So you guys had have seen a post somewhere about it, there might be one on here not to sure, but anyone going to the EECMM?

[Dave 88 A.E]

I found a sick video of a gt35r rx-7. it sounds awesome

http://www.youtube.com/watch?v=Ty85qzSQKcE&feature=related

I'd rather rez's Porsche 914. has a 20b going in.

[FlashFive]

So you guys had have seen a post somewhere about it, there might be one on here not to sure, but anyone going to the EECMM?

yea i saw it over on mazdas247, too far away for me

[TalonTsi97]

One of you guys need to help out a previous mazda owner and buy these. http://www.tristatetuners.com/forum/showthread.php?t=66532