NateDog Creations
03-24-2008, 05:21 PM
Car as delivered
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002679.jpg
Stripped for cage
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002688.jpg
Floor plates are already welded in place and the rollbar is starting to take shape
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002697.jpg
Rear of cage is complete except for some welding
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002700.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002701.jpg
Seats installed for fitment of door bars
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002709.jpg
Side bars installed. We prefer to install them without bends for more rigidity, but the large seats did not allow it. Although the customer didn't opt for lower support bars attached from the bottom side of the bend down to the main hoop/floor connection, they can be added to make up for the loss of stength due to the required bend
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002713.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002715.jpg
Next was fabrication of an intercooler and piping. Steel tube crash bar can also be seen, which was required when the oem bumper was switched for an aftermarket unit and body kit.
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002829.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002848.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002844.jpg
Steel downpipe was fabricated with flexpipe and cat. Pipe later received thermal coating.
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002834.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002837.jpg
Project complete with fresh paint and a complete makeover
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003201.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003202.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003211.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003207.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003212.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003206.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003216.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003221.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002679.jpg
Stripped for cage
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002688.jpg
Floor plates are already welded in place and the rollbar is starting to take shape
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002697.jpg
Rear of cage is complete except for some welding
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002700.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002701.jpg
Seats installed for fitment of door bars
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002709.jpg
Side bars installed. We prefer to install them without bends for more rigidity, but the large seats did not allow it. Although the customer didn't opt for lower support bars attached from the bottom side of the bend down to the main hoop/floor connection, they can be added to make up for the loss of stength due to the required bend
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002713.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002715.jpg
Next was fabrication of an intercooler and piping. Steel tube crash bar can also be seen, which was required when the oem bumper was switched for an aftermarket unit and body kit.
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002829.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002848.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002844.jpg
Steel downpipe was fabricated with flexpipe and cat. Pipe later received thermal coating.
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002834.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM002837.jpg
Project complete with fresh paint and a complete makeover
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003201.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003202.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003211.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003207.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003212.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003206.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003216.jpg
http://natedogcreations.com/images/content/pictures/eagle/talon/murray/IM003221.jpg