EDM wiring help needed

[Smokescreen]

Fixed! Thread closed..

http://i4.photobucket.com/albums/y129/Smokescreen110/Done2.jpg

[TROLL]

hey i have EDMs and i think i have the same harnesses as you. i have no idea how they are wired but i need to pull mine out and check the connections everywhere so if you want to come up and meet me and take a look at them then you're more than welcome to. unfortuantely it probably wont happen till weds or thurs when i have some time.
bryan

[Gorilla Unit 33]

damn tim they look nice but all sorts of hell with them wires

[Smokescreen]

hey i have EDMs and i think i have the same harnesses as you. i have no idea how they are wired but i need to pull mine out and check the connections everywhere so if you want to come up and meet me and take a look at them then you're more than welcome to. unfortuantely it probably wont happen till weds or thurs when i have some time.
I can probably get Thurs off so we have some daylight. Let me know. G Unit 33 or Barry has my number if you need it.

damn tim they look nice but all sorts of hell with them wires
The stock lighting just wasn't cutting it. The high beams are hella bright (H1 bulbs). http://www.jdmpartstx.com/hid_install This probably would have been easier if I just went HID... I've missed the past 3-4 thurs nights b/c of these.. The wiring is pretty basic, I just don't know what the green and the black wires on the headlight are. I thought the black was ground so I wired them ground to ground and power to the bulb (green wire). Don't even ask about the leveling motors... Way too much effort to get them to work.

[TROLL]

ok thats cool with me. like i said i'm not very good with wiring but i do have edms wired up and they work as they should so as long as you think you can figure it out from there we should be set.
i'd actually like to wire them so the HIDs dont turn off when the high beams go on so maybe i'll see if i can figure that out while they are out of the car.
bryan

[Smokescreen]

i'd actually like to wire them so the HIDs dont turn off when the high beams go on so maybe i'll see if i can figure that out while they are out of the car.
I remember reading something on that...

Maybe this?
http://forums.nasioc.com/forums/showthread.php?t=694380

[Smokescreen]

Fixed...

[TROLL]

the best view is certainly not the tail lights of an altima :-P

thanks for the link to that high/low wiring thing... i knew it was out there just havent looked yet. anyways i'm still down for thursday if you arent able to get it figured out by then.

bryan

p.s. i shoulda told you to check your fuses. there are seperate right/left fuses for the headlight so make sure both are good.

[the mike]

I'll look into how my JDM's are wired in and post up tomorrow. Should be the same wiring, just different projectors.