Any honda people around lansdale area?

[Nastha]

I need help i got integra it has ls/vtec and vtec not working =[ i rewired it still not working ecu is fine works great on other cars and the solenoid is fine.
I just changed the spark plugs and wires and nothing working =[

[SovXietday]

How do you know it's not working? What's it tuned on? Are you getting correct oil pressure to the head?

[Nastha]

well i dont know its not working it just not kicking it

[95TurboDC2]

check your oil. if your oil is low vtec wont hit. i had that problem with my tubro gsr.

[foss]

vtak fluid low?

[420sx]

http://www.honda-tech.com/zerothread?id=830163

[driftingrx5.7]

how far are you from east stroudsburg? i can swing down and give you a hand.

[95TurboDC2]

hes about an hour and a half

[Nastha]

i had scott look at it still didnt work

[SovXietday]

Answer my questions so I can help answer yours.

[driftingrx5.7]

i am wondering if there is oil running to the head correctly. can i ask who did the lsvtec setup?

[Nastha]

well heres the thing first i thought it was my ecu but we tried that in my friends car and it worked fine i bought the car like it about 2 weeks ago i changed the solenoid but it still dosent work i had my friend rewire the setup still not kicking in so i dont whats wrong

[SovXietday]

i am wondering if there is oil running to the head correctly. can i ask who did the lsvtec setup?

This.

VTEC won't engage if you're not getting the correct amount of oil to the head. I'd pull the oil lines, make sure they're clean, and then also make sure they're installed right. If it doesn't have an oil kit for the head then well... you've probably got other problems.

[driftingrx5.7]

This.

VTEC won't engage if you're not getting the correct amount of oil to the head. I'd pull the oil lines, make sure they're clean, and then also make sure they're installed right. If it doesn't have an oil kit for the head then well... you've probably got other problems.

100% agreed! thats why i asked who did the vtec setup, because it might be possible that the oil is not going to the head and if you didn't put the right head gasket on and all that stuff can all mess it up!

[Nastha]

today i pulled the oil line it it seem small it was the size of one of those coffe mixing straws u think i should go witha bigger line

[james_ls]

You're IN Lansdale...and your asking this online?

Go stop past R/T!

[420sx]

today i pulled the oil line it it seem small it was the size of one of those coffe mixing straws u think i should go witha bigger line

http://shopping.lightningmotorsports.com/customer/product.php?productid=380

[Nastha]

You're IN Lansdale...and your asking this online?

Go stop past R/T!

r/t said they cant take me until 2 weeks ><

[vtecwhat!!]

what is your teg tuned on

[SovXietday]

today i pulled the oil line it it seem small it was the size of one of those coffe mixing straws u think i should go witha bigger line

Lol, you have pictures of this line?

That line needs to be -3AN at the very least, Honda's need a lot of oil to the head, needs to be something like 55psi of oil pressure for VTEC to engage.

Get yourself a real well known oiling kit. I mean, afterall, it IS your engine. Golden Eagle makes a great kit and I think it's like $90 new.

[driftingrx5.7]

ok wait your oil line was really small! thats not good! can i ask how is your oil line hooked up? do you have a sandwitch adaptor on your oil filter? or do you have it tapped into your oil pressure sensor? and i am +1 on the oil line pics, and sovxietday is correct on the oil pressure for vtec

[Nastha]

here you guys go i dont know who did the setup i bought how it was no wonder why i got a deal on it ><

http://i6.photobucket.com/albums/y226/Nastha/Picture579.jpg
http://i6.photobucket.com/albums/y226/Nastha/Picture573.jpg
http://i6.photobucket.com/albums/y226/Nastha/Picture577.jpg
http://i6.photobucket.com/albums/y226/Nastha/Picture572.jpg

[SovXietday]

What the **** is that thing Ted out of?