PA: 02 RWD WRX Part out

[JasterM5]

Just totaled the rex and there may be engine damage so I'm parting the car out. Car had quite a few goodies so I'll list them here, some are already bid on but I'll list them in case they fall through.

Edit* I will be selling on a first pay first serve basis. I'm sorry but I need the money from these parts to buy a replacement daily driver.*

Aluminum Control Arms - $200 + shipping
Megan Track Series Coilovers - 800 + shipping
STi Replica front and rear strut bars + STi Replica H-Brace - $250
USDM Sti 6sp Tranny w/Jdm Manual Controll DCCD - center Diff modified for RWD but the real center Diff comes with the purchase - $3500 - first with the money gets it.
Perrin V1 Top Feed Fuel Rail Kit with Stainless Steel Lines - $250 + shipping
JDM TGV Deletes - $200
GP MOto 4-2-1 Equal length Headers $400 + shipping
STi Pink top feed Injectors $250 OBO shipped
Forced Performance SS turbo oil feed line - $70 shipped
First Gen Hyperflow FMIC + all piping and front bumper beam- $450, $500 shipped
Helix Downpipe - Sold
Autospeed Catless Exhaust - $250 + shipping
R160 Cusco 2-way rear Diff with legacy ring gear in wrx carrier - $800 + shipping
06 wrx Trunk profesionally welded the holes for wingless - $200 - Sold
Automodelista Lip Spoiler - $250 + shipping Sold
Spats + rear diffuser - Sold
eyelids - Sold
Perrin Intake - Sold
Samco Turbo Inlet - $90 shipped
VF39 Turbo - $400 picked up. $425 shipped

Parts I have lying around for the car
Stock Wing WRB -$150
Stock TMIC
STi-RA Suspension -$350
Power Steering Pump Sold
Front bumper beam

Stock parts Available
Complete car wiring harness
Starter
STi clutch
Engine Crossmember
Tranny Crossmember
ABS solinoid
Brake Cylinder
Door panels
Front Driver Door $250
Front Passenger Door $250
Rear Driver Door $250
Rear Passenger Door $250
Rear Passenger Axle
Front Brakes $60ea
Rear Brakes $60ea
Front Rotors $120 set
Rear Rotors $120 set
Front Knuckles/Hubs
Rear Knuckles/Hubs
Rear Bumper - Sold
Front Windshield
Rear Windshield
AC condensor
Front Driver Fender - dent by parking light
Front and Rear Seats
Fuel Tank
Rear Deck Cover -Sold
Entire Dash
Glove Box
HVAC Controls
Driveshaft for use with an STi Tranny
Any Engine sensors
Airbags

Anything else you want or need please email me @ JasterM5@gmail.com or PM I accept Paypal but prefer local and cash.

http://www.auk113.com/ivan/wrx/acc3/IMG_0026.jpg

http://www.auk113.com/ivan/wrx/acc3/IMG_0027.jpg

http://www.auk113.com/ivan/wrx/acc3/IMG_0028.jpg

http://www.auk113.com/ivan/wrx/acc3/IMG_0029.jpg

http://www.auk113.com/ivan/wrx/acc3/IMG_0030.jpg

http://www.auk113.com/ivan/wrx/acc3/IMG_0033.jpg

A few pics of the car now:

http://www.auk113.com/ivan/wrx/acc3/IMG_0050.jpg

http://www.auk113.com/ivan/wrx/acc3/IMG_0051.jpg

http://www.auk113.com/ivan/wrx/acc3/IMG_0053.jpg

http://www.auk113.com/ivan/wrx/acc3/IMG_0054.jpg

[KoPrussia]

hey, do you have those rear spats for sale? Interested in those for my wagon.

[subwrxkid]

how much for the rear window?

[BLKtopSIL80]

would you go lower for the rear with the diff if it was piked up?

[MuddyREX]

Holy crap. Wow. Sorry bout the car dude.

How much for the rear bumper?

[Sincere]

OOps I signed in under Matt's name. this is JasterM5

KoPrussia: I'm looking to get rid of the whole rear diffuser for $100 the muffler melted alttle bit of the diffuser and the spats need to be repainted from a scuff on a high curb

subwrxkid: $300

BLKtopSIL80:Lowest I'll go is $750 for the Diff and carrier. If you need anything else let me know.

MuddyREX: $100 w/complimentary Re-Bar and hole

[NickRSwrx]

Do you have the stock pedals? If so I need a replacement set for my 2.5rs. Please let me know, thanks

[justinlansdale]

i'd take the steelies if they were 5x114.3 :-(

sorry to hear about the wreck.

[guesswho]

pm'ed you.

[james_ls]

How....

[phantazm]

catted exhaust? tbe or catback?

also, price for decklid cover?

[95nracer]

Sorry to see it man. Good luck with the partout/sale.

[jrtcbmw]

do you still have everything needed for a auto to manual swap (no trans, everything else)?

[JasterM5]

Yes I have the pedals, the master cylinder and everything.

[MuddyREX]

Ivan, got a pic of the hole in the re-barred rear bumber?

[teh DIRT]

ill take your fuel pump controller and the IAC valve. lemme know.

[tmtattoo]

hey man sorry about the car. How much for the strut bars and h-brace also do you have the turbo still. And would the bov mount to a tmic. pm me and let me know thanks

[Kerplunk105]

did you happen to have the extended armrest?

[JasterM5]

tmtattoo: $250 for all 3

Kerplunk105: no sorry

[dsmtuner4g63]

how much for drivers door and drivers front quater panel

[CHAOS]

ivan, can you get me a pic or 2 of the header?

[scutzi128]

How much for both passenger doors?

[JasterM5]

scutzi128: $250 per door so $500 for both

chaos: get some to you tonight.

[scutzi128]

Are the doors in good shape?

[heavyb]

two thhings how much for whats left of the front mount piping kit and the stock wrx wing please call me at 856 524 2910

[MuddyREX]

Ivan, I'll take the rear bumper. I'll get a hold of you in the next few days so I can arrange to pick it up.

BTW, are there any visible holes from where the rear OEM kit was installed?

[JasterM5]

heavyb: I left a voicemail for ya but just in case. FMIC is $450 with everything included. $150 for stock WRX wing.

MuddyREX: I think there might be one. The one you can see in the picture with the rebar hole. That was the only screw I could see on the bumper. I don't even know why that one is there to tell you the truth.

[K-Rex]

More info on exhaust please.

Also, got an uppipe?

[JasterM5]

The exhaust is an Autospeed Catless exhaust with a prototype Autospeed muffler. Autospeed never actually put this muffler into production. Whats left is everything behind the Downpipe. I had a Helix Downpipe mated to it but that has sold already. Cost is $250 picked up for the rest of the Exhaust. Moderate in Loudness.

Up-pipe is not available because its integrated into the equal length headers.

[jrtcbmw]

Yes I have the pedals, the master cylinder and everything.

cool can you get me a price for everything?

Jason

[K-Rex]

The exhaust is an Autospeed Catless exhaust with a prototype Autospeed muffler. Autospeed never actually put this muffler into production. Whats left is everything behind the Downpipe. I had a Helix Downpipe mated to it but that has sold already. Cost is $250 picked up for the rest of the Exhaust. Moderate in Loudness.

Up-pipe is not available because its integrated into the equal length headers.

Check PM

[auk113]

bump it up for a good friend with bad luck

[Renegade_]

How much for engine crossmember and front rotors and brackets?

Keep me up to date on the engine - even if there is some damage depending on what it is I might pick it up from you. I see its 120 for the rotors, but I need the brackets that attach them as well since the rotor is bigger than the RSs.

[JasterM5]

How much for engine crossmember and front rotors and brackets?

Keep me up to date on the engine - even if there is some damage depending on what it is I might pick it up from you. I see its 120 for the rotors, but I need the brackets that attach them as well since the rotor is bigger than the RSs.

do u mean u need the hubs too?

[Renegade_]

do u mean u need the hubs too?
I don't need the hubs, there should be a bracket which looks like this:

https://www.subarugenuineparts.com/images/subaru-h6-rotor.jpg

Its the bracket that attaches to the hub. This is a rear rotor setup so it will look different, but there should be a bracket that attaches the caliper to the hub. How much for the front rotors plus brackets?

[Buster]

is the R2-D2 for sale Ivan? or are you holding that?

[S4toSTI]

Hey ivan just saw this happy you are ok sucks about the car.

[HighOctane]

is the front mount piping bent?

[binkman88]

how much for the mirrors and the center a/c vent and radio trim bezel? pm me with prices and or pics

[05scooby]

Do you have any catch cans for sale?

[CarbonIS]

will ur rear seat fit my car?

[tmtattoo]

if you don't have anyone that is buying the inlet i can get the money to next friday the 7th. Let me know by pm. Thanks