Mods part deux

[JNZTuning]

Well the evo is down for a little bit while I work on Part 2 of my addiction. This "should" be it till next winter.

- HTA 35r
- JMF tubular manifold
- GSC S2 cams
- Quatermater twin disc clutch
- custom fuel system
- ported head courtesty of yours truly (ME)
- dual valve springs
- 1mm oversized valves

Brent's been building me this manifold over the past couple days and has gone through two revisions as you'll see. End result...perfection. As expected. We just need to get the wastegate outlet welded on tomorrow and it's done. Next step...pull the motor.

ORIGINAL DESIGN

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0610.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0608.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0611.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0612.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0613.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0614.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0615.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0618.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0620.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0622.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0625.jpg

REVISED DESIGN

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0647.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0648.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0649.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0652.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0651.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0650.jpg

[Gorilla Unit 33]

redsign loks like shorter routed piping, NICE

[CleanNeon98]

Hot!!

[ScubaSteve]

Beautiful work as always.

[kunt_masha]

daanngg

[lagos]

Now thats a manifold!

[assault187]

Looks great, Those JMF guys are amazing...I cant ait till these start going up for sale.

[JNZTuning]

redsign loks like shorter routed piping, NICE

Exactly! We changed the first design one runner at a time and this is what came out. :mrgreen: Much shorter runners and very close to being identical in length.

[CHAOS]

thats a nice peice.. good work.

[BradC]

How much would something like that run, for a custom application?

[scutzi128]

you guys churn out some amazing looking stuff

[turbo4g63]

Brent is an absoulutely amazing welder.....I've gotta get a rid in this thing sometime chris. Your car is amazing.

[TalonTsi97]

Sick setup, i was waiting to see how it looked after reading about it on dsmtalk. Looking forward to seeing it at some meets this summer.

[JNZTuning]

Here are some final pics with the wastegate mount on. Head comes off tomorrow and should hopefully be back from the machine shop mid week. Last thing i'm waiting on is the HTA 35r upgrade to come back from FP.


CHECK OUT THOSE WELDS!!!!! :cool:

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0653.jpg
http://i21.photobucket.com/albums/b279/11secdsm/IMG_0654.jpg
http://i21.photobucket.com/albums/b279/11secdsm/IMG_0655.jpg
http://i21.photobucket.com/albums/b279/11secdsm/IMG_0656.jpg
http://i21.photobucket.com/albums/b279/11secdsm/IMG_0657.jpg
http://i21.photobucket.com/albums/b279/11secdsm/IMG_0659.jpg
http://i21.photobucket.com/albums/b279/11secdsm/IMG_0660.jpg

[03.5MSP]

Does the exhaust mani have a collector or no, cant really tell from the pics? Looks so sick, mmmmm.

[JNZTuning]

Yep, 4-1 merge collector.

[Omar_MSP]

oh my lord, that is very impressive!

[amit]

Haha I just saw your post about me....Yeah...tried to take off the AEM sticker after i took off the stupid intake. It's gonna be one of those weekend projects getting the rest of the sticker off though.

From now on i'm just not even gonna act like I recognize people from TST in the damn camry, I need to get the mr2 done faster :mrgreen:


cya around buddy!

[JNZTuning]

Looky what showed up yeseterday. :D

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0767.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0769.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0771.jpg

[SpendOne]

HTA...the goodness!

[TROLL]

that manifold is incredible... verrrry nice work to whoever crafted that.
and damn all the hta owners. grr.

[BlackBulletTSi]

very sickly done I must say. Thing looks sexy as hell

[TROLL]

yeah i pretty much want you to make a super sexy manifold like that for the supra... but that might cost a pretty penny huh?

[zerioustt]

wowzas thats incredible!!

phenomenal welds and nice hairdryer to boot.

[zerioustt]

yeah i pretty much want you to make a super sexy manifold like that for the supra... but that might cost a pretty penny huh?

depends if they took a aftermarket one and setup a jig with it. would make fabrication time less and then cost you less. but depends on the fabricator...but whoever is welding/fabricating there has a gift.

[assault187]

depends if they took a aftermarket one and setup a jig with it. would make fabrication time less and then cost you less. but depends on the fabricator...but whoever is welding/fabricating there has a gift.

I doubt JMF would replicate an already existing model......

[zerioustt]

I doubt JMF would replicate an already existing model......

sorry i didnt mean to replicate one just to use as a jig and could change things.

[PaleDSM]

Someone link this to Brent. Blow his ego up a bit. :)

[jjm4life]

love the manifold those welds are perfect. i guess this is one of those occasions where black is faster than white.

[jc8889]

Nice work

[JNZTuning]

Thanks guys! Got a lot done today. I need to fab up a lower intercooler pipe on Monday, get a couple more fittings, and then throw a tune in her. ALMOST DONE!! :D

[ScubaSteve]

Someone link this to Brent. Blow his ego up a bit. :)

What part of that seems like a good idea? :lol:


On a side note... if you guys aren't working too hard on tuesday I might stop by.

[JNZTuning]

Stop by anytime Steve!

[teezer212]

hta what the sexy