Anyone know of a shop that does Fender Rolling?

[CHR!S]

I need to get my front & rear fenders rolled on my s2000 so i dont have any problems with rubbing. does anyone know of a shop that i can go to that does a good job?

tia

[CHAOS]

I think area1320 and r/t tuning both do it.

[95TurboDC2]

+1 on r/t tuning. iv seen many cars that they have done. quality work and people to work with.

[AREA1320]

rolling an s?? how low and how huge of tires do you have :) S's usually can get away with alot

[CHR!S]

im not low at the moment, but once i get suspension ill only be 1.5-2" lower than stock. the wheels & tires are pretty gnarly, got the j's racing specs (except narrower rear
tires). the wheels are bbs ryII's 17x8 17x9 +40 offset with 225/45-17 front and 245/40-17.
i just want the fenders rolled so when i lower the car i dont have any major rubbing issues
http://img211.imageshack.us/img211/3505/ap1022yn8.jpg
http://img170.imageshack.us/img170/8528/ap1016yl1.jpg

[AREA1320]

I would be suprised if there is that much travel to actually need rolling. But we can help of course, but beware the rears dont have much to roll

[CHR!S]

I would be suprised if there is that much travel to actually need rolling. But we can help of course, but beware the rears dont have much to roll

well at the moment i do not have my new suspension (still waiting on my bilstein pss9's to arrive). once they do, i will need to have them rolled. im hoping that lowering the car will give the wheels more camber so they dont stick out as much.

you guys can roll the front and the rears though correct?

[Signatus230]

Nah, Ryan can only roll the drive side front fender. Lol. Yea, they can do front and rear. Are you going to have some aggressive alignment done? Also, what wheels + tires you get on there?

edit: I just saw the BBS's. Very nice!

[CHR!S]

yea im gonna have the car alligned and everything after i get the suspension installed... thats the only thing thats holding me back at the moment.

bbs RYII's (very rare) with kumho mx's

[Cookieman00x]

there was a place in collegeville that did fender rolling... Ill look them up and see if I can find them..

[probevette]

Auto Addictions.

[CarbonIS]

Ryan @ Area1320 ftw!

Shawn at R/T Tuning also does it

[pearl]

rub it until it fits. :thumbup:

[Vince@R/TTuning]

actually S2000's dont have much room to work with..they suck like that when it comes to agressive offsets and such..but from the picture u are gonna need more then rollin the fenders make them fit...let us know if we can help ya on the alignment or the rolling...if we do everything here we can check the alignment at the same time we roll the fenders and find a happy medium