New to TST Central NJ RX7 RHD

[Francogt1]

hello everyone my name is Franco im from central Jersey. im 18
i had a cuple of cars allready but this is my joy for now.
86 mazda RX7 second Gen JDM swap Turbo II 13b engine. 34.xxxk On the engine Miles! 54.xxxKilometers
RHD Convertion :roll: and a cuple of more upgrades from HKS PCU Full exaust and such.

If any one needs help with their Rotary i could help .

This car is not Finished yet, its more of a Project, but by Summer time i'll be completly done.

well thank you and here are the pics.!
Btw. if any one is realy realy intrested in the car, if i get the amount im looking for might let this beauty go.


http://i112.photobucket.com/albums/n186/francogt1/DSCF1319.jpg
http://i112.photobucket.com/albums/n186/francogt1/DSCF1315.jpg
http://i112.photobucket.com/albums/n186/francogt1/DSCF1310.jpg

[doug]

very nice RX-7.... welcome.

[malloyboy1]

welcome to tst nice car

[bl@ckvr4]

Goddamn. Now I gotta clean up. I ****in love FCs. Welcome to TST. I hope to see this car at a meet soon.

[Francogt1]

thank you guys.

buummp!

[TurboTagTeam]

Nice looking FC. You did a RHD swap? Or is it a real JDM FC?

[Francogt1]

RHD Convertion. its a USDM car with a US title

[Create240]

indeed nice rx7 :) where in central do you live? im in middletown...and welcome to tst :)

[95nracer]

Good looking car. Now get some spacers (atleast 25mm) on that thing asap!!



Did you pick this up recently?

[omgjacki]

Welcome to TST!

[FlashFive]

Sweet ride, welcome to tst, love the RHD lol.

[TalonTsi97]

Good looking car. Now get some spacers (atleast 25mm) on that thing asap!!

Same comment i was going to make, beautiful car. If i had an FC thats exactly how it would look minus those wheels

[Goddabob]

Sweet ride, props on the rhd conversion.

[abrok99]

how much does a rhd conversion cost??

[turbo4g63]

Did you just recently buy this car...it was at a exton meet last summer. If so, The previous owner had just repainted the car and there was overspray all over the place.

[Francogt1]

lol yea it was orinialy from PA, over spray and door jams and such are going to be dealt with by spring...
Turbo4g63 any more info u can give me regarding the privious state of the car and such?

[Francogt1]

And YESS SPacers are Deffenely coming in the future, if not Diff wheels with bigger Offset.

[Crzyguy972]

welcome to tst

[Francogt1]

thanks

[swyn]

welcome, very sweet looking ride!!!!

[Spininall4s]

sick fd what are your plans for it????

[95nracer]

sick fd what are your plans for it????



You probably meant sick FC! :afro:

[jdmwill]

i have a s5 half cut for sale no engine.if you ever need any parts pm me.welcome by the way.

[HKSdrift3r]

argh, loving the RHD fc!!

[Francogt1]

thank you every one car looks a bit different now, HID sys and Proyector lights on the way =]

[grmreapr]

Ah I love fc's but Owning a rotary is like dating a porn star. It's strange, it's fun when it works, sucks when it doesn't but through it all you know the others secretly are jealous and wonder how it works. ;)

[The Captain]

Nice car. I think i remember seeing this on craigslist a few months ago.

[SpEcRv9]

did i see this for sale on the internet recently?? i wanted to trade in my car and buy it soo bad haha

[Spininall4s]

thats for the correction 95nracer..damn chassis codes lol... definantly need to change the wheels up , what are they adr formulas? nothing screams jdm like rhd and uhh....adr's!?

[05Accent]

elcome to tst.

[Francogt1]

lol ADR yea... idk about changin them but deffenetly puting some 25mm Spacers at back, should look ok then. plus tires are brean new.
thanks for the support guys.

[Francogt1]

95nracer, what set up are u runing on your FC? im planing on Upgrading the Turbo soon.

[95nracer]

The mods in my garage is fairly current.


If you are planning on upgrading the turbo the easiest (cheapest) route to go would be to go with a BNR hybrid of some sort. I was making 297 on a stage 1 on 10psi and I've seen dyno's for 330+ on the Stage 2 and higher with higher boost pressures. I would go with atleast the stage 2 and up. You will need a new intake pipe for anything more than the stage 1.

If you go the full T4 route you will need atleast a manifold, turbo, new oil lines, custom intercooler pipeing, custom exhaust, intake/filter. There is some other stuff, but you can see what is the easier route. It depends on what you want to do.


Just please do some research before you do anything to the 7 and take your time. Don't rush into anything.


You have to think what you want to do with your fuel and computer also. Fuel and timing is very important when upgrading the turbo.

[Tonbone23]

nice the car looks sick man

[lownslow95]

welcome to tst. sick lookin car.

[sherwood]

welcome..were in central jerz?

[Francogt1]

95nracer, thank you for the info, if i do upgrade it wont be more then a stage 1, at 290bhp i will be happy.
right now i got a dyno sheet making 215bhp with full exhaust from Hartbeat, intake,Fcom HKS fuel Mngm comp. thats pretty much it.
290hp will be just fine with me.
so what would i need to replace exacly? Injectors,intercooler,B.O.V,turbo Controler,will stock headers work?
im very new to the Rotary scene. any info will be great.

thank you every one

[240_fun]

where in central jersey
im from pennington, right outside princeton,
hope to see ya at some meets or something
does it feel weird to be driving RHD?

[Gorilla Unit 33]

any more info u can give me regarding the privious state of the car and such?

the previous owner is a member on here, if i remember his name ill post it up. You can research his threads and pretty much find out anything about the car that he posted about on here. From what i remember he was a pretty nice guy.

[Francogt1]

i like it more then LHD , and its way better to pararell park =]
and well when u pull next to some one at a light and they look inside the car, and ur on the oposite side driving they get a kick out of it, expecially girls..;]

btw Proyector lights should be In my door step at any second.

[bl@ckvr4]

i like it more then LHD , and its way better to pararell park =]
and well when u pull next to some one at a light and they look inside the car, and ur on the oposite side driving they get a kick out of it, expecially girls..;]

btw Proyector lights should be In my door step at any second.

Not a fan of projectors. :mad:

[Francogt1]

well the rx7 headlight's bulbs are built in so i wanted to install a HID sys i have therefore i need to but new headlights that take H4 bubls.

[Francogt1]

hey guys thanks for the help, i researched TST and found out the last owners, username and viewed all this posts and such seems like he took care of the car.

[240_fun]

nice, hehe impress those chicks bro!
did u do the RHD swap urself?
if so how hard was it?
i was contemplating doing it on my 240 if i got the JDM front clip but it looks really hard to do
you anywhere near Hamilton?

[Francogt1]

i didint do the RHD convertion, but i am a bodyman i done think it would be hard it it would deffenetly take lots of man hours,a nice garage and all requiered tools.
im located in Elizabeth.
do the RHD! buy a full clip with engine and everything u need, so u can swap everything once.

[bl@ckvr4]

well the rx7 headlight's bulbs are built in so i wanted to install a HID sys i have therefore i need to but new headlights that take H4 bubls.

Ohhhh....THOSE kinds of projectors! I thought you were talking about removing the flip up headlight assembly altogether. I hate that. In the case you just described, that is fine. That'll look awesome. I have seen that on an FC and it is fantastic. The FC has really bright anyway.

[Francogt1]

oh noesss i hate those lights that dont flip and have like two quarter size projector lights lol, it will look the same just with a projector in the middle and HID courtesy of a 07 BMW 740i =]

[240_fun]

what kinda ballasts are you gonna use?

[Francogt1]

Bmw's but i dont remmeber the intensity, proably more then 10K

[Francogt1]

HID's are in =]

[filjoy2001]

i love this car. nice, welcome

[Francogt1]

thanks