cmr076 lil brotha's ae86 silvertop build" is set free"

[jdmwill]

http://i239.photobucket.com/albums/ff204/jdmwill/m_5e34c65e26c999857bbc685f1ae6ee56.jpg
215-763-4206
1555 n.5th st
philadelphia,pa,19123

hey guys here is a couple of pics from dave's lil bro dan ae86 silvertop.that we are currently building.
http://i239.photobucket.com/albums/ff204/jdmwill/dan3.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan18.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan19.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan13.jpg
a lil fire wall prep so it could clear the distributor.

http://i239.photobucket.com/albums/ff204/jdmwill/dan21.jpg
slight diference between the silvertop and a 16v 4age.
http://i239.photobucket.com/albums/ff204/jdmwill/dan20.jpg
cut off the over lapping flange.

http://i239.photobucket.com/albums/ff204/jdmwill/dan16.jpg
secure waterlines and thermostat before installing the engine.
http://i239.photobucket.com/albums/ff204/jdmwill/dan15.jpg
then figure out this hell hole.lol fuel lines

http://i239.photobucket.com/albums/ff204/jdmwill/dan17.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan12.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan11.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan5.jpg
yeah i used my jacket to clean the engine.lol

http://i239.photobucket.com/albums/ff204/jdmwill/dan10.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan9.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan22.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan8.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan6.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan7.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan31.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan30.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan28.jpg

crazy spaghetti harness
http://i239.photobucket.com/albums/ff204/jdmwill/dan25.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan24.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan23.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan27.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/dan26.jpg

so i hope you guys enjoyed the pics i'll post more of the build later.

[Kevin]

JDMwill creepin' on that motor lol

[97TurboDSM]

holy small pictures

[turbo4g63]

www.photobucket.com you can post better pics using that

[xEJ20x]

holy small pictures

times eleventy billion...

[jdmwill]

yeah i didn't notice they were shrunk.untill i was finish.lol don't worry i will redo them. tomorrow

[SpendOne]

Nice. Oh yea, I fixed my oil leak after my hands froze. LOL.

[95naSTA]

Wow. That 86 is really clean!

Are you wiring in an a/c and all the idle up stuff?

I wired up a silvertop/AE86 for a buddy and I didn't feel like messing with all that extra crap.

Are you using the evap lines for fuel lines too?

[cmr076]

thanks will, we cant wait to get the car back, i think i'm picking up a gts within a week... are we doing the supra rear?

[jdmwill]

hey dave give me a call tomorrow.hopefully yur bro would be beating the crap out of this car soon.i should be able to finish all the wiring and water lines tomorrow.as for the rear diff im still waiting for the guy to buy it.if he doesnt its yours.

[jdmwill]

new stance and wheels since the calipers didnt clear the old wheels.
http://i239.photobucket.com/albums/ff204/jdmwill/l_49a0e2ca48f73f7202d75fe7d354817f.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/l_692605576586b559ab4cf03d4d325b2b.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/l_fac5f8e50fae4482feec307cc5a225b7.jpg

and of course my favorite pic...
http://i239.photobucket.com/albums/ff204/jdmwill/l_b8fb648032df380831f14e26ead97969.jpg

she is coming along nice.......

[jdmwill]

ok so i did it ssr long champs test fit what a tease.lol
http://i239.photobucket.com/albums/ff204/jdmwill/IMAGE_3251.jpg
so after much debate and pacience Dan get's my old celica/supra rear.:furious:
http://i239.photobucket.com/albums/ff204/jdmwill/IMAGE_3241.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/IMAGE_3231.jpg
the weakest link...
http://i239.photobucket.com/albums/ff204/jdmwill/IMAGE_3221.jpg
yeah that's a toda flywheel.:wink:
http://i239.photobucket.com/albums/ff204/jdmwill/IMAGE_3071.jpg
if this clutch slips we have a big problem.:lol:
http://i239.photobucket.com/albums/ff204/jdmwill/IMAGE_3091.jpg
http://i239.photobucket.com/albums/ff204/jdmwill/IMAGE_3061.jpg


so far the hachi is 95% complete.pretty soon you'll see her at the meets.:thumbup:

[Shawn@R/Ttuning]

Your gonna want to get an Adjustable 4link in the rear with a panhard bar. Other wise your alignment will be way out of spec. Also the old ass bushing have alot of play and will be very sloppy. Just a suggestion. Also need to get some bits to claim more steering angle.

[ray@turbotek]

damn will nice freaking setup, cant wait to see this thing in person

[jdmwill]

Your gonna want to get an Adjustable 4link in the rear with a panhard bar. Other wise your alignment will be way out of spec. Also the old ass bushing have alot of play and will be very sloppy. Just a suggestion. Also need to get some bits to claim more steering angle.

don't worry you guys will be incharge of that.:thumbup:

[cmr076]

damn will nice freaking setup, cant wait to see this thing in person

hopefully we'll be bringing it out to meets soon enough!

[cmr076]

Your gonna want to get an Adjustable 4link in the rear with a panhard bar. Other wise your alignment will be way out of spec. Also the old ass bushing have alot of play and will be very sloppy. Just a suggestion. Also need to get some bits to claim more steering angle.

PM'd!.

[cmr076]

oh and will can you email me all of the pics you have so far, maybe a little bit bigger :) or put them on a CD and ill swing by and pick it up. also i just got off the phone with my buddy thats doing the tires on the new wheels and he said its a HUGE stretch... maybe new tires?

[jdmwill]

oh and will can you email me all of the pics you have so far, maybe a little bit bigger :) or put them on a CD and ill swing by and pick it up. also i just got off the phone with my buddy thats doing the tires on the new wheels and he said its a HUGE stretch... maybe new tires?

bead blast them bro. and as for the picks no problem i'll give them to you when im done with the hachi.:thumbup:

[cmr076]

any updates will? or have i just not talked to dan in a little...

[jdmwill]

she's coming along nicely just trying to locate a new valve cover gasket set. i didnt receive the the grommets and they dont interchange with nothing in the us. other than that the new igniter is good. hopefully i could make some time in this coming week to finish her. im running on 4 hour sleep during the week. it seems there is not enough time during the day. lol but she will be a real screamer when she's 100%. trust me i get a little giddy when i work on her. lol

[ghstrg78]

DOOOOOOOOD I WANT MY CAR BACKKKKKKKKKKKKK THIS IS TORTURE:mrgreen:

[jdmwill]

DOOOOOOOOD I WANT MY CAR BACKKKKKKKKKKKKK THIS IS TORTURE:mrgreen:

lol........ dude trust me i want it out here too. but silvertop valvecover gasket are a rear thing in the us. i spoke and order a set yesturday from a guy that works for pass engineering. hopefuly he will come true since i tried all my connections. by the way i order 2 set just incase.

[ghstrg78]

awsommmme the guys at pass are very cool they got my dizzy cover which is also pretty tough to get in the US... did you get the whole gasket set from them or just the grommets

[jdmwill]

awsommmme the guys at pass are very cool they got my dizzy cover which is also pretty tough to get in the US... did you get the whole gasket set from them or just the grommets

full set cant afford any more delays.lol

[ghstrg78]

sweeeet man cant wait.... did u really sell ur gts?

[cmr076]

COME ON WILL! we wanna put this bitch sideways into curbs and ****!

[jdmwill]

sweeeet man cant wait.... did u really sell ur gts?


yeah i couldn't pass up the offer. kinda bummed i kinda miss it.

COME ON WILL! we wanna put this bitch sideways into curbs and ****!

i like your style man....lol. you guys are going to be like a lonely fish in a sea full of whales at the club loose events....:thumbup:

[ghstrg78]

yeah i couldn't pass up the offer. kinda bummed i kinda miss it.



i like your style man....lol. you guys are going to be like a lonely fish in a sea full of whales at the club loose events....:thumbup:


ahhh thats a bummer man, u better have snet it to a good home... and well just be the lonley fish everyone wants to be:mrgreen:

ohh and also do you think you could PM me with a possible estimate of what we owe you... if not i could stop by friday or saturday... thanks man

[jdmwill]

So Dan's hachi has been a awesome adventure building her. From the day she was towed to me i saw her as a blank canvas. Everything i wish i could have done to my hachi i was going to do to his. So between everything that was going on in the world meaning "there is no such thing as overnight parts from japan". specially for the toyota silvertop platform. simple things like a valve cover gasket set took way to long to get. probably becuase the people that promise to shipped them never did. Repetuable companys just gave me the run around with empty promises. until a good other forum member met me halfway between here and boston and deliver me the goods.

know enougth complaining she's 97% done and tomorrow god willing would be the day she finally runs on her own. i have started her twice before but never driven her. Hopefully Dan would enjoy her as much i have had building her. NOW BEAT THE SH*t OUT HER FINALLY.

here are some pics:


solder solder solder i must have put in about 4 hours of soldering on her.

http://i26.tinypic.com/28jbeir.jpg
http://i31.tinypic.com/x0ry43.jpg
http://i32.tinypic.com/n53fpx.jpg
http://i32.tinypic.com/9a4rc9.jpg
http://i29.tinypic.com/6786zb.jpg
http://i28.tinypic.com/2mricjp.jpg
http://i30.tinypic.com/ru1cvq.jpg

probably my favorite part of the build the igniter and ignition coil inside the car. oh don't worry about the hole i have that cover too.

http://i31.tinypic.com/2s94yog.jpg.
http://i31.tinypic.com/2pq1gjr.jpg

One of my biggest problem on my hachi was the ecu location. Everytime i went drifting some dumd ass would kick it it and fry it. On Dan's I tucked it up so high and cleared from any freaked out person's legs.

The relays are away from people's feet also. i just love to stick a relay on everything ecu, fan motor, fuel pump, guages, everything. trust me it save me a million times


http://i27.tinypic.com/2j0nkvp.jpg
http://i25.tinypic.com/28anwy0.jpg
http://i26.tinypic.com/n6pa3q.jpg

Beside installing the battery, air filter, radiator cap the engine bay is done.


http://i25.tinypic.com/257pyqe.jpg
http://i30.tinypic.com/hx1aw5.jpg
http://i27.tinypic.com/2aippgz.jpg

so hopefully tomorrow the hachi will be out and terrorizing your meets soon.

[Soon2bG60]

I love AE86's
=], when do we get too see the full car?

[Da InFaMMuS 1]

that is teh hotnessssss forreal. what are the exact specs of the motor?

[Ender81]

Looks pretty good. I've really been thinking of getting an sr5 and swapping in a silvertop.

[ghstrg78]

yessssssssssssssssss.... looks f'n awsome

[cmr076]

that is teh hotnessssss forreal. what are the exact specs of the motor?

20v silvertop motor, ITB's from the factory, TRD headers, walboro pump, SAFC neo, JDMwill special intake, HKS hipower catback.

[SpendOne]

Dave bitching everyday about wanting to drive the car....finally its around teh corner...

[ghstrg78]

yo will.... when can we expect to pick her up... hopefully by the end of the week?

[KingOfDelco]

This Hachi > Go cart. can't wait to see this baby in action! Its gonna SCREAM with those ITBS. :D


"that is teh hotnessssss forreal. what are the exact specs of the motor?" -- 1.6L 158hp @7400 /162tq factory specs right?? In a lightweight rwd chassis, this motor is badA$$.

[CleanNeon98]

JDMWill is king! Love it man!

[Kevin]

Will's a n00b.

[cmr076]

plans for the cage and paint/bodywork are in the works!

[ghstrg78]

i think im just gna get some 19 inch cromes instead of a cage :)

[ghstrg78]

ohh n if n e ones interested.... http://www.zerotohundred.com/newforums/automotive-news/172724-2008-toyota-new-ae86.html

[jdmwill]

so she's done and she's a screamer buahahahaahahaaa.

i cant beleive she's leaving here...:cry:


enjoy the video.
http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=39804638

[cmr076]

mua ha ha ha ha ha it sounds like a 2 stroke!

[Kevin]

wow sounds scary

[the4g63]

Sounds awesome. These little cars are growing on me.

[amit]

That was the greatest thing I've heard in a long while. Oh the things I'd do for a high revving 20 valve in an ae86!!

[jdmwill]

well it has been an adventure but it was time to say goodbye to the hachi today. after 9 month of waiting at the shop for little miscelaneus parts the hachi is some what done. she runs, she grows, she sounds cool but it needs a little tuning and of course the missing link. the wright igniter and she'll be fully functional. unfortunately you cant trust ebay, or other toyota guys to sell you right part. she left here today on her own power but with the assistance of a tow truck "no registration i guess".lol

hopefully Dan and Dave keep her for a long time and get to enjoy what we kindly call at the shop "tak's revenge".

enjoy some pics...take good care of her guys i miss her already:cry:.

http://i37.tinypic.com/1tn1ps.jpg

http://i34.tinypic.com/25ggigo.jpg

http://i38.tinypic.com/2jd2mnq.jpg

http://i37.tinypic.com/10pahjp.jpg

http://i33.tinypic.com/2eydudt.jpg

http://i37.tinypic.com/dze7t5.jpg

http://i34.tinypic.com/25ggigo.jpg

http://i37.tinypic.com/1tn1ps.jpg

[ghstrg78]

thanks so much will! i kept staring at her the entire way home :)

[Proven]

Looks good Will!! Am I going to see this at the BBQ?

[jdmwill]

Looks good Will!! Am I going to see this at the BBQ?

sorry Bob but no, Dan and Dave are gonna get her painted and caged.so its going to a bit before she's out in the street.

[ghstrg78]

hey will my brother said that i left some stuff in a pile at your shop?

[jdmwill]

hey will my brother said that i left some stuff in a pile at your shop?

yes sir i'll get them together on monday and give you a holla.

[ghstrg78]

okeydoke

[ghstrg78]

look out everyone, the hachi has finally been out driving!