BLKTOPSIL80's RB20 180sx build thread...New Update: check last post

[BLKtopSIL80]

hey guys well after crashin my old hatch i had to pick up a new shell..so after about 2 days of lookin i picked up a coupe shell...

pics of my old hatch:

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject028.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject029.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject030.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject031.jpg

the rad support was shiffted about 2 inchs to the right :(

Making space in nates garage:

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject038.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject040.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject042.jpg

ok so now onto the new car, first off here is what i found when i pulled the dash:

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject044.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject043.jpg

A WIRING NIGHTMARE :mad:

So after about an hour of disconnecting useless wiring i finally got it cleaned up and cleared out..

In the process i found this (no idea what it is):

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject046.jpg

On to the exterior (dont mind all the stickers, there coming off in a week, the car is going in for body work):

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject047.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject048.jpg

ok heres some pics of the interior being gutted to get ready to be painted black:

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject053.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject051.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject050.jpg


theres alot that is gonna be done to this car in the next week and a half:
1: BC Coilovers
2: My rb20det out of my old hatch
3. Body work with interior and engine bay painted
4. All new pads a rotors
5. stainless steel brake lines
6. falken hanabi wheels 17x9 all around
7. fixing my silvia front end to put on the coupe

and some other odds and end.....will update pics everyday so keep posted..

[keithtwofour]

hahaha that electrical piece looks like a computer monitor plug

[smelly240]

except you're wrong :D and its a consult board for datalogging... its a good thing. If you want help or the software for it PM me.

white side goes to consult wiring (or you can hardwire it to any z32, sr, rb ka, ca ecu ;) ) blue side is a Serial (RS232 for you computer nerds) to USB adapter so u can use the *crap* on a computer thats not old as dirt (ie doesnt have serial ol' skoolie*)

*edited out bad words*

[agoodall]

you gonna put the rear seat back in? if not want to sell it to me?

[cszakolczai]

except you're wrong :D and its a consult board for datalogging... its a good thing. If you want help or the software for it PM me.

white side goes to consult wiring (or you can hardwire it to any z32, sr, rb ka, ca ecu ;) ) blue side is a Serial (RS232 for you computer nerds) to USB adapter so u can use the *crap* on a computer thats not old as dirt (ie doesnt have serial ol' skoolie*)

*edited out bad words*

Yeah I have to get one of those serial to USB adapters for my innovate wideband. Thats good stuff right there.

[smelly240]

i have a doule rs232 to a usb - that way i can connect the consult and innovate at the same time with a single usb.

[Honest_Bob]

i have a doule rs232 to a usb - that way i can connect the consult and innovate at the same time with a single usb.

oh ****! You got the baller status... :-p

[BLKtopSIL80]

ok so today we got off front suspension and rear suspension along with front and rear brakes...

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject074.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject073.jpg

These are the spots that are gonna be welded up and prep so the engine bay can be painted..

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject076.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject077.jpg

and heres how the car sits as of today...

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject079.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject078.jpg

[smelly240]

lookin good - are you gonna cut that entire area out where the battery used to go and weld a new peice in? so u can cut a tidy hole for the IC piping :wink:

[BLKtopSIL80]

lookin good - are you gonna cut that entire area out where the battery used to go and weld a new peice in? so u can cut a tidy hole for the IC piping :wink:

u read my mind lol yea its gonna get welded up and then puttin a fresh hole in for the ic pipping

[agoodall]

are those tail lights tinted?

[smelly240]

yeah - the corners and chuki bumper lights were all blacked out too (i remember that car from a long time ago - with the initialD **** on the door)

*edit* - i see you've already started locating dings as well :)

before u put the motor in dont forget to get a solid steering bushing (if that car doesnt have one yet) - that shizzy is a bitch to install with a downpipe and stuff all there.

[BLKtopSIL80]

well didnt really get alot done today due to the fact i had to take care of some things....did manage to get my new exhaust...

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject086.jpg

kinda stole it off the wifeys car lol...its a apexi n1 replica....in the picture its still on her car.....

alot of update will be up tommorow...stripping out my old hatch and gonna start swapping parts...so stay tuned

[iloveitsideways]

i miss my exhaust =/

[Jjaeger240]

Keep the weird Initial D/Taxi/whatever graphics. Add awesome points I swear. Keep the circled ding marks too!

[Wiisass]

Keep the weird Initial D/Taxi/whatever graphics. Add awesome points I swear. Keep the circled ding marks too!

Is that like keeping the group letter and dots for number of runs on your side window for months after an event?

And make sure you cut out all that rust on the strut tower and then patch it well, that area is structural and if you just pass the hole and don't get rid of all the rust and seal it later, it's going to rust out again. And double check the whole car for other weak areas, there's a lot of rust on that chassis, you might as well take care of it now before you put everything back together and it gets worse.

And is that exhaust mounted on the car? Or just hanging really low? If it's mounted, then make sure to get new exhaust hangers because that looks horrible.

[BLKtopSIL80]

ok so some more updates today....we finally got my hatch over to nates house and started going to town and ripping everything out...

front end off and gettin ready to take the motor out..
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject120.jpg

up next is the interior...dash, center console, steering etc...all taken out..
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject121.jpg

High five shes almost out...:thumbup:
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject122.jpg

http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject124.jpg

and shes finally out... now its time to clean her up
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject125.jpg

my friend ian giving the RB some love
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject126.jpg

Finally got some new parts today:

Up first is my brand used Q45 calipers...
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject127.jpg

Also got my new intercooler pipping (3 Inch)...
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject128.jpg


some more updates will be up tomorrow..

[BLKtopSIL80]

Well DHL was so kind as to bring my headlights today :mrgreen:

Bricks baby lol

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject137.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject138.jpg

GTR Grill

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject140.jpg

last but not least my new corners

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject141.jpg

[DelayedZ]

Coming along nice!

[boostedfury]

looks like some sick parts and i love the head lights and corners. nice job man

[Da InFaMMuS 1]

thats gonna be sick when its done!

[BLKtopSIL80]

yea the car is gonna be lookin better than ever when its done....

so today we finished takin alll the little things out of my old car and began inspection my motor...found that my turbo went bad and was leakin oil..BAD!!....so i came to the conclusion that the motor is gonna be gettin some work done as well...so keep posted an ill have a list up soon

[DN_Sileighty]

yo wha up. where did u get that coupe from i remember it

[BLKtopSIL80]

Well UPS came today and brought my new BC Coilovers.....12k up front and 10k in the rear....

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject144.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject145.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject146.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject147.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject148.jpg

Installed pics will be up tonite....

[smelly240]

lets see how low u can get it (i have bent rear toe rods from em hitting the subframe :) )

[BLKtopSIL80]

dont wrry it will be low....we did some adjustin today and realized that i have to roll my fenders....alot

[justinlansdale]

was that white shell originally KA-T? i feel like i've seen it for sale a little while back as a blown KA-T. nice build-up so far!

[180sxDrifter]

yes it was a ka-t befor and was for sale on here if I remember correclty, used to belong to some1 on philly240sx

[twistedlanes]

those c/o's are cute what did they run you?

[BLKtopSIL80]

they ran me about 1000 shipped

[twistedlanes]

thats a good deal...and how much room do you have as far as adjustment?

[BLKtopSIL80]

32 way adjustable...and pretty much i can lower it to the floor

[Shawn@R/Ttuning]

When you get it them on bring it it and we can align it for you and get your ride height set right.

[BLKtopSIL80]

When you get it them on bring it it and we can align it for you and get your ride height set right.

how much does that cost?

[BLKtopSIL80]

Srry guys that i havent updated in awhile. I have been so busy with work and also the fact that its freezing out everyday does help. So here is a lil update for you guys...enjoy

Up first is my new XS Power intercooler....Dimensions- 12" Tall, 32" Wide, 4" Thick and 3" outlets :banana:

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject161.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject162.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject163.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject164.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject165.jpg

Well we finally got the coil overs in and started adjusting the height...not done yet...still got to tweak some things but heres a lil teaser.....(dont mind the ugly stock rusted ass brakes, Q45's will be in soon)..Oh by the way these pics dont do justice for the car...it looks alot better outside

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject157.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject159.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject158.jpg

more to come....

[iloveitsideways]

i miss the hatch =/

[keithtwofour]

saw this car yesterday coilovers deffinatly look awesome, i really like the wheels too man.

[eDmSiL80]

wow i member seeing that car on nico way throwback ago. Wat happened to ur old car?

Cant wait for clubloose :-p

[BLKtopSIL80]

ok so its been awhile since the last update so here we go...

heres how the car sits now with all the ugly circles and decals removed..shes looks alot cleaner...

http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject489.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject507.jpg

Engine bay was stripped down and all the rust was removed and shortly after it was painted...

http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject494.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject495.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject498.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject499.jpg

interior was also cleaned out and repainted..

http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject504.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject505.jpg

After the car came back to my house i did a test fit of my new headlights..still a little more adjusting needs to be done and bumper needs to finish gettin the bumper bolted on but it still looks alot better from before...

http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject491.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject500.jpg

And heres a pic of how low the car is....waiting to find some one who can roll fenders so i can go lower..

http://i66.photobucket.com/albums/h253/jdmkoukis14/sil80/randomcoupeproject506.jpg

* Engine Bay and Interior Work Was Done By Dave Lawrence*

[whitezenki]

heat gun + baseball bat + hammer

SLAM THAT **** BRO.

[HKSdrift3r]

gtr grill looks awesome on there!!

[grmreapr]

place in allentown PA rolls fenders

[jdmwill]

coming along nice tony...

[iloveitsideways]

she coming along nice.... =]

[BLKtopSIL80]

Ok so it was beautiful outside today so i got outside and started working on my car again...

Put on my new rb25 turbo (courtesy of 510freak)

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject526.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject527.jpg

Took the dash back out and removed the heater core and also cleaned up some wiring..(dont mind the white still in the interior...im going to repaint it)

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject535.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject528.jpg

Relocated harness so i could lower the car more....

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject530.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject531.jpg

Heres A few shots of the front of the car (she looks kinda sad lol)

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject532.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject533.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject534.jpg

And a shot of the wifey doing some work..

http://i66.photobucket.com/albums/h253/jdmkoukis14/silvia/randomcoupeproject540.jpg

[iloveitsideways]

whooa look at that chick helping you .. thats me<3

[BLKtopSIL80]

ok so heres a little update...i am scrapin the coupe because there is a lot of things wrong with it and on top of that there is a lot of rust....so me and the wife picked up this 93 hatch (rust free)...it was originally the wife's car but she now wants an s14 so the car was giving to me...

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject543.jpg

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject542.jpg

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject541.jpg

Mods so far..
- BC coilovers
- Welded Diff
- Diamond Racing Wheels
- Megan Test Pipe
- 3 inch straight pipe

All the parts from the original build are now going to go into this car...so ill keep you guys posted

[iloveitsideways]

nothign like bring back old black hatchy again :mrgreen:

[BLKtopSIL80]

well i washed her today..here are some pics..

first heres a pic of the gauges and my neo and avcr installed awaiting my motor to be put in...

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject554.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject557.jpg

now for the freshly washed car..

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject560.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject559.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject558.jpg

and my tires for tomorrow..

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject561.jpg

[iloveitsideways]

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject558.jpg


http://i123.photobucket.com/albums/o285/teedez/Picture136.jpg

[turbo4g63]

Much better platform to start with than the white one you had...good luck with it

[SMOCAN]

damn, nice new hatch... looks reallll clean. I like the diamond racing wheels... keep us updated.

[billyboy]

club looooose !

[Create240]

very nice :)!!!!!!!!!! you get rid of that coupe??

[BLKtopSIL80]

ok so it has been awhile since i have given u guys a update...well the motor is finally going in just awaiting some more parts....but ne ways heres some new pics...

Heres how the motor since as of yesterday..valve covers were takin off so i could paint them real quick..

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject563.jpg

Here are the freshly painted valve covers...not the greatest but not bad for a 7 dollar can of spray paint..

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject582.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject585.jpg

Next up my mckinney poly urethane mounts finally came in..

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject564.jpg

Finally got around to mounting up my new exhaust...gotta love ebay...(its just temporary)

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject566.jpg

installed my brand used corbeau seat

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject568.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject569.jpg

Last shot of my sorta clean ka before its yanked out..

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject567.jpg


Some new things that are being done:
-Aeromotive FPR
-RB26DETT 470cc injectors and rail
-New Dump Pipe
-New Down Pipe
-Greddy Boost Controller
-Godspeed Intercooler
-Greddy Catch Can
-Rear Mount Battery Kit

stay posted :mysmilie_753:

[180sxDrifter]

lookin good so far

[pinkarrowsnow]

Lookin good keep us updated when the motor goes in.

[ReVision]

Very nice,will it be finished in time for Nopi?

[ScubaSteve]

Looking good. Wheres that ka going? If its in good shape and low miles I'd be glad to give it a new home.

[BLKtopSIL80]

Very nice,will it be finished in time for Nopi?
yea it will be but unfortunately when i went to nopi qualifier i didnt get my license because well stock ka's suck lol....but it should be at the next clubloose event

Looking good. Wheres that ka going? If its in good shape and low miles I'd be glad to give it a new home.

srry man but the ka is gonna get built and kept as a spare in case my rb takes a **** this season

[BLKtopSIL80]

New update: Finally picked up my rb26 470cc injectors and fuel rail...Courtesy of the guys at Pride Performance.

http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject601.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/randomcoupeproject602.jpg

[iloveitsideways]

cute feet in the picture with the motor mounts lol =]

[BLKtopSIL80]

Finally got the motor in: SO FRESH AND SO CLEAN CLEAN !!

http://i66.photobucket.com/albums/h253/jdmkoukis14/get-attachmentaspx.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/motor2-1.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/motor3.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/motor4.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/motor5.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/motor.jpg

more updates tomorrow

[ReVision]

What kind of wiring is involved with this swap?

[DN_Sileighty]

its gonna be a really clean harness setup

[BLKtopSIL80]

here is what was done today:

Installed intercooler (Godspeed) and my koyo rad and flex a lite dual electric fans

http://i66.photobucket.com/albums/h253/jdmkoukis14/motor6.jpg
http://i66.photobucket.com/albums/h253/jdmkoukis14/motor7.jpg

Installed Aeromotive FPR, waiting on some fittings to finish it up. Also we moved the fuse box over to the battery tray so we can clean up some of the wiring.

http://i66.photobucket.com/albums/h253/jdmkoukis14/motor8.jpg

more updates tomorrow

[iloveitsideways]

IM SOOOO JEALOUS IDK WHY I GAVE UP MY RUST FREE CLEAN HATCHY TO YOU!
it coming along so good. i cant wait to see how jdmwill does the innercooler piping. :cool:

[BLKtopSIL80]

todays updates:

valve covers, cam cover and center piece were installed:

http://i66.photobucket.com/albums/h253/jdmkoukis14/motor9.jpg

started to test the intercooler pipping:

http://i66.photobucket.com/albums/h253/jdmkoukis14/motor10.jpg

more updates tomorrow

[justinlansdale]

wow such a clean hatch. i'm jealous!

[10-42Adam]

Very clean. Looking good so far...

[BLKtopSIL80]

ok so heres where i left off last time i posted.....

http://i66.photobucket.com/albums/h253/jdmkoukis14/ttttt.jpg

so injectors were installed and intercooler pipping was finished...

http://i66.photobucket.com/albums/h253/jdmkoukis14/b.jpg

http://i66.photobucket.com/albums/h253/jdmkoukis14/bb.jpg

http://i66.photobucket.com/albums/h253/jdmkoukis14/t.jpg

http://i66.photobucket.com/albums/h253/jdmkoukis14/tt.jpg

http://i66.photobucket.com/albums/h253/jdmkoukis14/ttt.jpg

http://i66.photobucket.com/albums/h253/jdmkoukis14/bbbb.jpg

http://i66.photobucket.com/albums/h253/jdmkoukis14/bbb.jpg

fpr almost done

http://i66.photobucket.com/albums/h253/jdmkoukis14/tttt.jpg

flex - a - lite fans installed...

http://i66.photobucket.com/albums/h253/jdmkoukis14/bbbbb.jpg


All thats left is finish the fpr, weld on bov, finish battery box and put the harness back in and were good to go...so hopefully ill have some vids up tomorrow if i can get it running.

[the mike]

Wow is YOUR oil filter easy to get to...:mrgreen:

[Vtecepidemic]

damn nice project you got there.

Wish i had a woman like that who is as into cars as i am.

[AngeloAJC]

not bad Tony...looking good bro

[iloveitsideways]

angelo surprise surprise,


ahhhh i cant wait she should be all done tomorrow if everything turns out right =]

[AngeloAJC]

ya i figured id chime in, ya know...i havnt been around really lol...having 2 race cars isnt cheap ya know haha

[BLKtopSIL80]

ya i figured id chime in, ya know...i havnt been around really lol...having 2 race cars isnt cheap ya know haha

and what 2 race cars are u talking about? ..

[AngeloAJC]

Rebuilt the Evo and its getting tuned i think next week..And i have a 89 coupe sitting around

[iloveitsideways]

Rebuilt the Evo and its getting tuned i think next week..And i have a 89 coupe sitting around

i heard you blew it up, and i though the coupe was just a daily? god you need to come around more.

[AngeloAJC]

i heard you blew it up, and i though the coupe was just a daily? god you need to come around more.

ya i did blow up the Evo. Im just waiting for my pistons to get to my house then it will be a fully forged and built motor..But stock turbo.. And when the Evo gets out of my garage I can weld the cage into the coupe

[iloveitsideways]

ya i did blow up the Evo. Im just waiting for my pistons to get to my house then it will be a fully forged and built motor..But stock turbo.. And when the Evo gets out of my garage I can weld the cage into the coupe
another cage into the 240 ( not another mustang cage?) and what do you plan on doin with the coupe that i have yet to see......? pictures

[AngeloAJC]

the mustang cage fits fine in a 240, the hatch i ****ed up with was that i couldnt find a RHD Steering rack and Dash....we will see how the coupe goes, no promises

[iloveitsideways]

the mustang cage fits fine in a 240, the hatch i ****ed up with was that i couldnt find a RHD Steering rack and Dash....we will see how the coupe goes, no promises

yeah but you can qualify for anything with a mustang cage, and RDH how you gunna do that you didn't even finish the last 240. i wasn't expecting any promises just was curious on what you were doing.

[AngeloAJC]

ok i will make this easier...Im not doing a RHD, and it is getting a REAL 240SX COUPE CAGE haha...idk if it will be done this year becasue i had to rebuild the Evo and im really concentrating on Johns car

[iloveitsideways]

ok i will make this easier...Im not doing a RHD, and it is getting a REAL 240SX COUPE CAGE haha...idk if it will be done this year becasue i had to rebuild the Evo and im really concentrating on Johns car

hahahah okay. so whats being don't to johns car, since i heard it back into pieces

[AngeloAJC]

body work and paint....then vinyls

[iloveitsideways]

Hatchys Finally Home, and all she needs is a re-tune.

[omgjacki]

So it'll be ready for Drift Out Wednesday this month?

[iloveitsideways]

So it'll be ready for Drift Out Wednesday this month?

YES !!! gettin re tuned tonight. && you better be out there the 28th =]

[BLKtopSIL80]

God i hate this car

12 hours, 80 dyno pulls, 2 packs of cigs and she still doesnt run right.. She made around 300hp all nite but there is still some wiring issues and fuel issues...i cannot ****ing stand this car....oh and on top of it the car will not start up on its own it needs a jumper box to start....its going back to the shop this week to fix everything AGAIN...idk just venting