Free turbo's and stuff

[99SL2_Modder]

Just some pics. Free, if you really want it. >_>

First up, an alternator! Guaranteed to overcharge your car and leak all over the place. Approx. shipping weight: 65lbs.

http://img.photobucket.com/albums/v614/Grolthok/work/altbottom.jpg
Bottom (drain line...it's oil filled)

http://img.photobucket.com/albums/v614/Grolthok/work/alttop.jpg
Top (electrical connections and oil fill lines)

http://img.photobucket.com/albums/v614/Grolthok/work/altpulleynut.jpg
33mm nut holding the pull and alternator seal

http://img.photobucket.com/albums/v614/Grolthok/work/altpullywidth.jpg
Small width alternator pulley


Second, we have a diff. Blows up constantly while pushing +30,000lbs. Heavy duty, and comes with pre-ground teeth! Approx. shipping weight: 300lbs.
http://img.photobucket.com/albums/v614/Grolthok/work/rear1.jpg

http://img.photobucket.com/albums/v614/Grolthok/work/rear2.jpg


Last but not least, 2 turbo's. Love to blow oil all over the place! Get your VNT/EGR turbo now! Came off of 2 different 4cyl engines. Approx. shipping weight: 58lbs.

http://img.photobucket.com/albums/v614/Grolthok/work/turboflange.jpg

http://img.photobucket.com/albums/v614/Grolthok/work/turboinlet.jpg

http://img.photobucket.com/albums/v614/Grolthok/work/turboinletsize.jpg

http://img.photobucket.com/albums/v614/Grolthok/work/turboexhaust2.jpg

http://img.photobucket.com/albums/v614/Grolthok/work/turboexhaust1.jpg



(Yes, I got bored at work.)

[Loserkidwac]

Can I come pick up that turbo please!! or both, seriously

[Mitsu3kgt]

If he don't take them I will take them. Whats your address and I will come pick them up.

[TROLL]

meh looks like i'm a little late... i want some cast aluminum to practice polishing with so those turbos would be great, or if you have anything else that comes along that'd be sweet too.
thanks...

[cburwell]

Will that diff fit a 2000-2001 5-speed sentra? I think my VLSD is worn. PM a price shipped to 19034.

[99SL2_Modder]

Ok...let me clarify some things.

I was bored at work, most of this is a joke. I've gotten some PM's about things.

I can almost definitely pull the turbos out of the shop and get them to my car. It'll be hard as hell though.

To my knowledge, no car on this forum could spool either of these turbo's. They have lag time on our 8.9l engines. They're freakin huge man. They're over 100mm. Remember that +1k hp supra with that huge turbo on it? That was a 95mm turbo. These are even bigger. They're heavy as ****. Probably crack or just snap your car manifolds right off.

If you really need cast aluminum, Troll, I can probably find some stuff in the shop to get ya. A lot of our engine stuff is cast. And dirty too.

I really hope you're kidding about that diff too. That thig seriously weighs about 300lbs, and my hand is on it in that picture. It's rigoddamndiculously big. And it's a rear...


I guess these pictures aren't really scaled properly. It's dark, and hard to take pictures by yourself of stuff that big. I'll see if I can get someone to take pictures of me next to them. Might make it easier to see how large these things really are.

(Alternator is 24v and someodd huge amperage. Runs both a 2 battery 1000cca industrial system, and a 4 battery someodd cca industrial system. Not able to be put in a car.)

[sleepersatty99]

hahahaha it got me. lol well see thats what happens whe you out the word free in there, lol

[matthenny]

Will that diff fit a 2000-2001 5-speed sentra? I think my VLSD is worn. PM a price shipped to 19034.

lol that diff is probly bigger then ur motor

[99SL2_Modder]

lol that diff is probly bigger then ur motor

It's about the size of a chevy small block

[TROLL]

yeah if you really can get a turbo, intake manifold, or other similar stuff that'd be sweet. i just want some stuff to practice on thats not going on anyones car since i'm sure it wont be perfect the first few times. thanks a lot...

[Loserkidwac]

I'll still take one of those turbos if you can get it...

[Keeper1343]

yeah if you really can get a turbo, intake manifold, or other similar stuff that'd be sweet. i just want some stuff to practice on thats not going on anyones car since i'm sure it wont be perfect the first few times. thanks a lot...

Ummm your the tristate DON okay..... you should use your power and abuse it. Just erase the comment the other guy made who said he had dibs and pull rank

[PUREKDM]

Ummm your the tristate DON okay..... you should use your power and abuse it. Just erase the comment the other guy made who said he had dibs and pull rank

ha yea or ban him if he doesn't cough up the goods

[cburwell]

I really hope you're kidding about that diff too. That thig seriously weighs about 300lbs, and my hand is on it in that picture. It's rigoddamndiculously big. And it's a rear...

So you don't think it would fit? :) <- I probably should have throw one of those in my first reply so you knew I was kidding.

[GyrlSpeedRT]

Thanks 99, I received my turbo in the mail today. I don't need one of those blow off dryer thingies to make it work do I?

Hahahaha

[yellow2000S/R]

I want this one... LOL Just rebuilding it and cleaning it all up could catch some nice $.

http://img.photobucket.com/albums/v614/Grolthok/work/turboflange.jpg

[99SL2_Modder]

I want this one... LOL Just rebuilding it and cleaning it all up could catch some nice $.

http://img.photobucket.com/albums/v614/Grolthok/work/turboflange.jpg

rofl

They're both the same.

VNT/EGR turbos.

And believe me, you'd spend more trying to rebuild it than you would buying a new turbo. The fins are chewed up because the journal snapped. Not to mention the housings on both are total chaos. It's pretty much toast. If they're still there Thursday, I'll talk to my foreman and ask if I can take one.

Our new engines use a Holset hybrid. I think it's slightly smaller, but the engines produce wayyy more power.

Old engine: 8.5l I4 275hp/940ft-lbs 2000rpm max
New engine: 8.9l I6 370hp/1200ft-lbs 2200rpm max

[yellow2000S/R]

rofl

They're both the same.

VNT/EGR turbos.

And believe me, you'd spend more trying to rebuild it than you would buying a new turbo. The fins are chewed up because the journal snapped. Not to mention the housings on both are total chaos. It's pretty much toast. If they're still there Thursday, I'll talk to my foreman and ask if I can take one.



I said it because it doesnt have oil all over like the other one :cool: ... LOL Seeing that you are 2 hrs away, not worth the drive really, plus I have to work on the garage tomorrow.

[TROLL]

let me know if you can get a turbo, i'd meet up for it for sheez. just ordered a whole slew of polishing gear, and i have a feeling once i get started i realize that i'm still missing a good amt of the proper tools to accomplish what hi'm looking to do. anywho, let me know, thanks.

[TurboDSMJ]

I'll take a turbo too, I need a good center piece for my dining room table. My Mom's ****ing flower pot is annoying to look at.

And yes, I will seriously take one.

[poolmike]

let me know if you can get a turbo, i'd meet up for it for sheez. just ordered a whole slew of polishing gear, and i have a feeling once i get started i realize that i'm still missing a good amt of the proper tools to accomplish what hi'm looking to do. anywho, let me know, thanks.

Bryan, grab the turbo off my diesel. Polish away. I don't give a crap what it looks like, and I have to rebuild it eventually anyway...

[99SL2_Modder]

Like I said, I might be able to get one (1) of them. I have to talk to my foreman first.

Mike: YOU might be able to spool these. It's off of our diesels. :D

[poolmike]

Prolly not. :lol: Who are you working for??

[99SL2_Modder]

Prolly not. :lol: Who are you working for??

SEPTA.

Depends on how big your diesel is.

Ours are only 8.6L/8.9L

Unless you want one from an Eldo...they only run the Dodge truck cummins engines.

The Champions...I have no idea what they run, but they're constantly re-ringing the pistons. I think every 6mos or so. Can't handle the load.