gvautosport
10-08-2007, 03:01 PM
We have a few Innovate Wideband gauges & dataloggers available at clearance prices as we make way for future product. the items we have are:
http://tunertools.com/prodimages/Innovate/3781_large.gif
Product ID: IN-3781
XD-16 Standalone Gauge Kit: Gauge W/ LC-1 & O2 Sensor
The Innovate “Standalone Gauge Kit” comes complete with the patented award-winning LC-1 Wideband Controller, NEW! XD-16 (16 in 1) 52mm Programmable Digital Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit, Software CD, and quick start guide.
The Innovate XD-16 dash-mountable Digital Display ships as an AFR gauge, but can also be configured to display any channel of the Modular Tuning System. Key features:
* 2 Bezels + 8 faces = 16 combinations (see below)
* 3/4” thick, so it's possible to mount even in surface mount configurations
* 3-character LED display -Record/Calibrate/Peak Hold button
* Programmable (values and colors) digital needle
* Record/Calibrate/Peak Hold button
* Billet Aluminum bezel
The kit also includes:
* Male 2.5 to 2.5 to connect to LC-1, AuxBox LMA-3 , LM-1, ST-12, or DL-32
* Terminator Plug
* Mounting Hardware Kit
* Cable to connect to a PC for real-time logging and programming.
For use with LogWorks2, LM-1, DL-32, LC-1, LMA-3 , and XD-16.
Regular price is $399.99 But PM us for a price too good to pass up!!! Only one available at this price!!!
also available:
http://tunertools.com/prodimages/Innovate/3724_large.jpg
http://tunertools.com/prodimages/Innovate/3726_small.gif
Product ID: IN-3724
Innovate LM-1 RPM Kit - (LM-1 + LMA-2 RPM Converter Cable)
LM-1 RPM Kit: Digital Air/Fuel Ratio Meter plus the LMA-2 (RPM Converter.)
The LM-1 by Innovate Motorsports is the industry's first and best complete O2 AFR wideband tuning system. A single self-contained unit combines a wideband air/fuel ratio sensor controller, a 6-channel data logger, and an easy-to-read backlit LCD display. This is the unit used by tuners, racers, and engine builders the world over.
* The Innovate Motorsports LM-1 RPM Kit is comprised of the basic kit plus the LMA-2 (RPM Converter). This cable contains a circuit to convert a tach signal into an analog RPM signal that can be logged by the LM-1. This cable also has 4 additional terminal screws to tap into and log other 0-5 V analog sensors from your vehicle.
The LM-1 RPM Kit Includes:
* LM-1 Digital Air Fuel Ratio Meter
* LMA-2 RPM Converter (Aux Input #2)
* Bosch 5-wire Wideband 02 Sensor
* Analog Output Cable
* 10ft. Sensor Cable
* 10ft. Power Cable (Cig)
* 6ft. Serial Cable for PC Connection
* Bung/Plug Kit
* Logworks Software CD
* Quick Start Guide
Tuning an engine for maximum power previously required long trial-and-error sessions on a dynamometer. With the LM-1, precise AFR measurement allows the user to correctly adjust many variables- including carburetor jetting, fuel injection, turbo fuel curves, etc.- without long and expensive dyno sessions. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-1’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
* World's only fully-digital wideband controller.
* Up to 6 Channels of data logging.
* Portable/ Handheld.
* Display both A/F and Lambda readings in real-time.
* Auto calibration to compensate for changes in temperature, altitude, and sensor condition.
* Two user configurable analog outputs.
* LogWorks - award winning tuning software.
The instrument can sample and store 6 channels of data- air-fuel-ratio and up to 5 other sensor data channels- internally in operation for later analysis on a personal computer. At a sampling rate of 12 samples/second the instrument can store up to 44 minutes worth of data in non-volatile memory. The data can be downloaded to a personal computer using a standard serial port and viewed/analyzed by the included LogWorks software or any standard spreadsheet program:
The Innovate LM-1 also features two analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 1 volt = 10 AFR (.6 lambda) and 2 volts = 20 AFR (1.3 lambda). With the provided LM Programmer software these analog outputs may also be configured by the user.
The Innovate LM-1 is available in various kit configurations:
1. The LM-1 Basic Kit includes the Innovate Motorsports LM-1 meter, a Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power adapter, serial cable for PC connection, 9V battery, exhaust bung and plug, CD and quick-start guide.
2. The RPM Kit is comprised of the basic kit plus the Innovate Motorsports LMA-2 (RPM Converter.) This cable contains a circuit to convert a tach signal into an analog RPM signal that can be logged by the LM-1. This cable also has 4 additional terminal screws to tap into and log other 0-5 V analog sensors from your vehicle.
This kit normally sells for $429, but we have 2 of these ready to go at an unbeatable price. PM us for details!
http://tunertools.com/prodimages/Innovate/3781_large.gif
Product ID: IN-3781
XD-16 Standalone Gauge Kit: Gauge W/ LC-1 & O2 Sensor
The Innovate “Standalone Gauge Kit” comes complete with the patented award-winning LC-1 Wideband Controller, NEW! XD-16 (16 in 1) 52mm Programmable Digital Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit, Software CD, and quick start guide.
The Innovate XD-16 dash-mountable Digital Display ships as an AFR gauge, but can also be configured to display any channel of the Modular Tuning System. Key features:
* 2 Bezels + 8 faces = 16 combinations (see below)
* 3/4” thick, so it's possible to mount even in surface mount configurations
* 3-character LED display -Record/Calibrate/Peak Hold button
* Programmable (values and colors) digital needle
* Record/Calibrate/Peak Hold button
* Billet Aluminum bezel
The kit also includes:
* Male 2.5 to 2.5 to connect to LC-1, AuxBox LMA-3 , LM-1, ST-12, or DL-32
* Terminator Plug
* Mounting Hardware Kit
* Cable to connect to a PC for real-time logging and programming.
For use with LogWorks2, LM-1, DL-32, LC-1, LMA-3 , and XD-16.
Regular price is $399.99 But PM us for a price too good to pass up!!! Only one available at this price!!!
also available:
http://tunertools.com/prodimages/Innovate/3724_large.jpg
http://tunertools.com/prodimages/Innovate/3726_small.gif
Product ID: IN-3724
Innovate LM-1 RPM Kit - (LM-1 + LMA-2 RPM Converter Cable)
LM-1 RPM Kit: Digital Air/Fuel Ratio Meter plus the LMA-2 (RPM Converter.)
The LM-1 by Innovate Motorsports is the industry's first and best complete O2 AFR wideband tuning system. A single self-contained unit combines a wideband air/fuel ratio sensor controller, a 6-channel data logger, and an easy-to-read backlit LCD display. This is the unit used by tuners, racers, and engine builders the world over.
* The Innovate Motorsports LM-1 RPM Kit is comprised of the basic kit plus the LMA-2 (RPM Converter). This cable contains a circuit to convert a tach signal into an analog RPM signal that can be logged by the LM-1. This cable also has 4 additional terminal screws to tap into and log other 0-5 V analog sensors from your vehicle.
The LM-1 RPM Kit Includes:
* LM-1 Digital Air Fuel Ratio Meter
* LMA-2 RPM Converter (Aux Input #2)
* Bosch 5-wire Wideband 02 Sensor
* Analog Output Cable
* 10ft. Sensor Cable
* 10ft. Power Cable (Cig)
* 6ft. Serial Cable for PC Connection
* Bung/Plug Kit
* Logworks Software CD
* Quick Start Guide
Tuning an engine for maximum power previously required long trial-and-error sessions on a dynamometer. With the LM-1, precise AFR measurement allows the user to correctly adjust many variables- including carburetor jetting, fuel injection, turbo fuel curves, etc.- without long and expensive dyno sessions. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-1’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
* World's only fully-digital wideband controller.
* Up to 6 Channels of data logging.
* Portable/ Handheld.
* Display both A/F and Lambda readings in real-time.
* Auto calibration to compensate for changes in temperature, altitude, and sensor condition.
* Two user configurable analog outputs.
* LogWorks - award winning tuning software.
The instrument can sample and store 6 channels of data- air-fuel-ratio and up to 5 other sensor data channels- internally in operation for later analysis on a personal computer. At a sampling rate of 12 samples/second the instrument can store up to 44 minutes worth of data in non-volatile memory. The data can be downloaded to a personal computer using a standard serial port and viewed/analyzed by the included LogWorks software or any standard spreadsheet program:
The Innovate LM-1 also features two analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 1 volt = 10 AFR (.6 lambda) and 2 volts = 20 AFR (1.3 lambda). With the provided LM Programmer software these analog outputs may also be configured by the user.
The Innovate LM-1 is available in various kit configurations:
1. The LM-1 Basic Kit includes the Innovate Motorsports LM-1 meter, a Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power adapter, serial cable for PC connection, 9V battery, exhaust bung and plug, CD and quick-start guide.
2. The RPM Kit is comprised of the basic kit plus the Innovate Motorsports LMA-2 (RPM Converter.) This cable contains a circuit to convert a tach signal into an analog RPM signal that can be logged by the LM-1. This cable also has 4 additional terminal screws to tap into and log other 0-5 V analog sensors from your vehicle.
This kit normally sells for $429, but we have 2 of these ready to go at an unbeatable price. PM us for details!