HUNTER ALIGNMENT Rack... Schedule your race or street alignment now.

[Shawn@R/Ttuning]

Winter Discounts on Alignments



Approximate Pricing is as follows;


$ 60: Put a car on the scales to find your total weight.

$ 60: 4 wheel basic alignment

$100: Lowered car on springs W/ Camber, Caster arms

$125: Lowered car on coilovers Damper adjustable WO/ arms. Including seting ride hieght

$175: Lowered car on coilovers Damper adjustable W/ arms. Including us doing ride height adjustments

$275: Lowered car on coilovers Damper adjustable W/ all adjustments. Including us doing corner balancing



Brand new
HUNTER ALIGNMENT RACK
being installed.
No car is to low, we can do every car.

http://www.herronautomotiveequipment.com/images/logos/Hunter_logo.gif


http://www.hunter.com/pub/product/racks/4715T/images/D4715T15.jpg
This is the rack we are getting. It is equipped to handle
tuned cars special alignment needs for racing and modified suspension cars.
http://www.mocomracing.com/dbimages/MR400offfrWinAlign9.JPG


We are offering alignments to everyone no matter what the application. Wether you just need your car to be aligned so it drives straight or you are intending to roadcoarse, drift, autocross or any racing and need the most out of your car we are here for you. Every car will be able to get aligned nomatter how low or how many aftermarket parts.

One of the most common results of lowering the height of a vehicle is bump steer. This is the result of a lack of parallelism in the steering linkage. Basically what happens is your cars natural geometry is changed so much from being lowered when you hit a bump the cars alignment changes and can make the car dart in directions you're not pointing it.

Another problem is tire wear. Most people just buy parts and install them. The problem with this is that once installing new parts your alignment will change. Excess Toe and Camber being two big issues. Toe will scrub the tread off the inside or outside of your tires. If it is off enough it can eat threw new tires in no time. Camber can also be a problem if it is in excess. Camber is useful when set right to use the most tire when driving hard. If it is wrong the tire will wear on an angle. The combination of both can be very expensive when you need new tires. An alignment can fix these issues before it is to late. Not to mention it is dangerous to drive a car un aligned because the car may become very unstable and unpredictable at speed.




http://www.hunter.com/pub/product/alignmentsystems/5118T/images/toework2.jpg
When modifying the height of a vehicle, the affect on the vehicle’s toe can be dramatic.

http://www.hunter.com/pub/product/alignmentsystems/5118T/images/camber.jpg
A vehicle lowered by 1” will experience a camber change of approximately -.84°,
whereas a vehicle lowered by 3” will experience approximately a -3.86° camber change.
(Actual numbers may vary depending on your cars suspension geometry.)

Our machine is the newest version they offer and has many great features not even offered for last years model. It is super bad ass and can do anything we need to do. If you have aftermarket suspenion on your car we have the special equipment to have it dialed in how it should be. If you just want your car to be low and look good and you need your alignment set so you do not waste tires. We can do that. If you want your car to handle the best it can in any type of racing we can set it up for that too. The special features we have with this rack that allow us to do special alignments for tuned cars are as follows;



Electronic Vehicle Ride Height Measurement System: Which allows us to set your coilovers to equal levels.



Electronic Corner Weighting: This allows us to balance your cars weight by adjusting the suspension. It makes sure each wheel has the same amount of weight on the ground. Or you can shift the weight where you need it. Doing this makes the car easier to handle and allows you to make faster lap times.



Integrated Bump Steer Measurement System: Basically this system moves the car through its suspension travel to see where the numbers move and if you're getting bump steer. Then we can get the proper parts to fix the issue.


Lazer Sensors: You don't have to remove bumpers like you do on some other types of machines.



Special Adapters: Safe for all wheel types. Won't leave scratches.



__________________________________________________ __________________________________________________ ____________________


Approximate Pricing is as follows;


$ 75: Put a car on the scales to find your total weight.

$ 80: 4 wheel basic alignment

$125: Lowered car on springs W/ Camber, Caster arms

$150: Lowered car on coilovers Damper adjustable WO/ arms. Including seting ride hieght

$200: Lowered car on coilovers Damper adjustable W/ arms. Including us doing ride height adjustments

$300: Lowered car on coilovers Damper adjustable W/ all adjustments. Including us doing corner balancing


Set up appointments now by calling 215-855-5565. Or pm questions to either Shawn@RTTUNING or Vince@RTTUNING. If you are confused about pricing or don't know where you will fit just ask here, call us, or pm us and we will help you.

[NOPSTNS]

my dream come tru!

ppl dont kno how important a good alignment is! ill be needin the full blown aligment and corner balance each spring when i get new tires. u guys did it for me about 2 months ago sans the corner balance so this spring when u guys do my new tires ill ask to have it aligned and corner balanced then.....im so excited! maybe i can twist pats arm and make him give me -2.5 front camber and -2.0 rear instead of my -2 and -2 setup now, i forsee much higher cornering speeds for next year, thus needing more camber!!!!!! yay for proper alignments!!!!!!!

[Dave]

i have been waiting for this! now i have to actually install my coilovers!

[Vince@R/TTuning]

^^^ O we have been waiting too!!!! Give us a call, I have been wanting to see your nsx for a while...

[Mr. SUAVE]

nice! how far are you guys from NE philly?

[Vince@R/TTuning]

^^^ bout 25 min at the most

[AREA1320]

Vince, awesome choice dude. that new rack is soooooo much fun to use!!

[Vince@R/TTuning]

^^^^ i wouldnt buy any other aligner...best there is...

[Shawn@R/Ttuning]

This thing is going to be amazing!!! We are all mega excited.

[Vince@R/TTuning]

rack will be here monday and hopefully be up and running by the end of the week....

[TurboTagTeam]

wow. Those are very good prices. It cost me $180 just for a 4 wheel alighnment on my M3

[Shawn@R/Ttuning]

^^^^wow...well we can do better then that...hit us up if you ever need anything

[Vince@R/TTuning]

Rack and aligner will be here tommorrow and hopefully up and running before the end of the week...also the corner scales should be here soon as well...

[whitezenki]

Ich werde sehr aufgeregt.

Really want to see the shop!

[88TSI_Rob]

Damn, you guys are now a one-stop shop for setting up a car for road racing. Now all we need is that track in Jersey to finally open so we can have a place to go race.

[Vince@R/TTuning]

^^^^ you aint kiddin...

[pinkarrowsnow]

Hey R\T I send you guys a PM on a alignment and fender rolling so can I get a quote on that. BTW its a 240sx with coilovers and RUCAS so it would be 200 for a alignment and how much to roll the fenders.

Thanks
Mike

[CarbonIS]

I'm interested in getting aligned for better handling in turns. I'm getting a good amount of understeer
going into turns now, and it looks like when I had the car aligned when I installed the coilovers they
just tried to zero everything out and I ended up with positive camber in the front.

Here's my suspension set-up

Suspension:

Tein Flex Coilovers
TIC Fender Braces
Whiteline Steering Rack Bushings (to be installed)
Perrin 25mm Adjustable Front Sway Bar
Perrin 25mm Adjustable Rear Sway Bar
Perrin Front Endlinks
Perrin Rear Endlinks

Shawn, could you pm me a price and date you could do this? Thanks!

-- Bill

[Vince@R/TTuning]

Rack just got here should be set up by end of the week!!!! start making those appointments

[whitezenki]

ughhhh..... call me back!!! lol

[Shawn@R/Ttuning]

It is almost ready to go. It will be fully installed and ready to go by Monday.


Hunter crew installing the rack.
http://farm2.static.flickr.com/1385/1226165402_dc273efe06.jpg
http://farm2.static.flickr.com/1126/1225224627_d24cea93f4.jpg
http://farm2.static.flickr.com/1215/1226165102_ccd1405fdb.jpg

[whitezenki]

Cant wait, Looks pretty badass

[Vince@R/TTuning]

aligner is officially up and running so lets make those appointments

[Shawn@R/Ttuning]

Some pictures of it up and running.
http://farm2.static.flickr.com/1343/1249680477_3ecd99b2e5.jpg
http://farm2.static.flickr.com/1360/1249680787_756f71a692.jpg
http://farm2.static.flickr.com/1429/1249681107_8cff406799.jpg

[Shawn@R/Ttuning]

ill prolly hit you up once i get coils on my new car :)

Sounds good keeps us posted.

[Cardriverx]

awesome. How much do you guys charge?

[Shawn@R/Ttuning]

awesome. How much do you guys charge?

Approximate Pricing is as follows;


$ 80: 4 wheel basic alignment

$125: Lowered car on springs W/ Camber, Caster arms

$150: Lowered car on coilovers Damper adjustable WO/ arms. Including seting ride hieght

$200: Lowered car on coilovers Damper adjustable W/ arms. Including us doing ride height adjustments

$300: Lowered car on coilovers Damper adjustable W/ all adjustments. Including us doing corner balancing

[Shawn@R/Ttuning]

Saleen with HRE's
http://farm2.static.flickr.com/1229/1259651699_6b3e00ff1b.jpg
http://farm2.static.flickr.com/1051/1260625388_e6e17788d6.jpg

[Shawn@R/Ttuning]

10% off alignments scheduled from now until the end of September to all TST members.

[Vince@R/TTuning]

getem while they're hot...

[pinkarrowsnow]

Hey guys ill deffinatly try to be there before the end of September to get my car aligned and fenders rolled. Ill PM someone in a week or so

[Vince@R/TTuning]

awesome let us know....give us some specs beforehand and we can let ya know if your gonna need anything else before you come up...

[pinkarrowsnow]

Vince can you guys get spacers i think I want some 20mm ones 4x114.3 but have to see how much the prices are. Also the ones that have the studs already in them not the slip on's.

[z'd up]

same rack that we have at school i think... pretty easy to use and really accurate, good luck with it

[AREA1320]

Vince, i thought you guys were sinking it??? no good on doing that? :(

[Vince@R/TTuning]

Vince can you guys get spacers i think I want some 20mm ones 4x114.3 but have to see how much the prices are. Also the ones that have the studs already in them not the slip on's.


yea we can get ya spacers depends on which ones you want the price varies...before you bring the car up give us a call and we will order them in for ya...thanx

[Vince@R/TTuning]

Vince, i thought you guys were sinking it??? no good on doing that? :(

might be moving within the next few months so i would have been a big waste if we did sink it in...so for the time being we built ramps so even the lowest car can get up def be sunk in at the new shop...

[cmr076]

Saleen with HRE's
http://farm2.static.flickr.com/1229/1259651699_6b3e00ff1b.jpg
http://farm2.static.flickr.com/1051/1260625388_e6e17788d6.jpg

sick car, who brought that monster in :mrgreen: no but on a serious note you guys did an awesome job, i took it out right after it got back to our shop and it felt amazing. hopefully we can NOT go through any more 400 dollar tires. thanks again guys.


~dave

[AREA1320]

might be moving within the next few months so i would have been a big waste if we did sink it in...so for the time being we built ramps so even the lowest car can get up def be sunk in at the new shop...

gotcha :) I can agree with that, digging then filling would be a total waste

[Vince@R/TTuning]

appts open....

[subwrxkid]

So if I brought you a car with some big wheels and fat tires and said I wanted them to fit, then told you I wanted -3 degrees camber up front, -2 degrees in the rear, and 0 toe all the way around you could do that? And I don't have to take my bumper and splitter off?

My search if finnally over!!!!!!!!!!!!!!!!!

[Vince@R/TTuning]

^^^^ as long as you have the suspension components to allow us to adjust it...we could do it

[subwrxkid]

Yes, I definately will. Cusco zero 2r coilovers most like, maybe Zeal. Can't choose.

For the rear, they don't have camber plates. So to adjust the camber what do I need in the rear, camber bolts? Also, what do I need to adjust the toe?

[Shawn@R/Ttuning]

Well if you need the extra adjustment we can get you arms that will make the car more adjustable as well as stronger. It will make the rear end more predictable. As well as those show points if thats what your looking for.

[subwrxkid]

What adjustable arms are you reffering to? No need for show points, it's going to be a full-blown track car with a nice paint job. LOL

[Shawn@R/Ttuning]

We can get most any. I know cusco makes some for sure.

[subwrxkid]

Yeah, they do but I am sponsored by cusco so if you tell me what I need, then I can just scoop that from them.

[Shawn@R/Ttuning]

In that case get all the suspension arms they will give you. If this is going to be a track car you want to get rid of all the rubber bushings. Makes it more predictable.

[Shawn@R/Ttuning]

Our scales are in let the corner weighting begin.

http://farm2.static.flickr.com/1103/1343973922_6d783ba742.jpg
http://farm2.static.flickr.com/1281/1343085033_1399b874bb.jpg

75 dollars gets you the total weight of your car.

[Vince@R/TTuning]

scales are here!!!!

[Shawn@R/Ttuning]

Drag alignment for one of JMF's car.
Cars that only go straight need alignments too!
http://farm2.static.flickr.com/1208/1368400822_ebe865d71f.jpg
http://farm2.static.flickr.com/1197/1368400666_5910143dc9.jpg

[ScubaSteve]

I thought that was Brent's car?

Anyway, I have a 93 s13 coupe and just picked up some used Cusco coilovers. Can you tell me what I will need for you guys to get it aligned properly?

[Vince@R/TTuning]

^^^ it is brents car...shawn posted it up and he didnt know...but as far as the alignment, as many adjustable arms that you can get would be the best, u will def need rear lower toe arms and rear upper control arms and front tension rods and we can pretty much set you alignment anyway ya need. If youy wnted to get the rear traction arms you could get those to but its not nessary...if you have any questions just call the shop 215 855 5565 thanx

[alwaysinboost]

I just left you guys a message to setup an appointment.

[ScubaSteve]

I'm hoping to get my coilovers and suspension parts in this week, if I do I'll install them this weekend and call you guys to set up an appointment for next week. Hopefully you'll have some spots open.

[Shawn@R/Ttuning]

Did you call yet?

[ScubaSteve]

Not yet, I'm waiting for my parts to get in before I set up an appointment. I have to install them on the weekend because I have to come home from school to do it so I don't want to schedule before I know I'll be ready. The guy said he would ship the coilovers yesterday and they're coming from NJ so I'm hoping they come in today or tomorrow.

[Shawn@R/Ttuning]

Cool keep us posted. Make sure you set an appointment a week or so in advance because we are usually booked up and won't be able to get you in right away other wise. So please set a date once you know. Thanks

[Shawn@R/Ttuning]

Big power Supercharged Vetter Aligned
http://farm2.static.flickr.com/1062/1419056763_a0afdd2de5.jpg

[ScubaSteve]

Cool keep us posted. Make sure you set an appointment a week or so in advance because we are usually booked up and won't be able to get you in right away other wise. So please set a date once you know. Thanks

Well the coilovers came in today but the rest of the parts won't be here till the 25th, stupid UPS. I'm eager as hell to get these things on but I won't be able to do it this or next weekend so I'll call you guys and schedule as soon as I can.

Thanks

[alwaysinboost]

haha, funny license plate... ICUP

[Vince@R/TTuning]

^^^ ya shawn is the creative one here...Glad you liked the alignment...Whos next??

[C'DALERIDER]

<
Very happy alignment customer. Great service and my car drives very true once again. Thanks.
Oh, the Motul products, i can feel a difference. Shifting is better. Engine seems to like the oil but my pocket didnt....haha. JK. Very good stuff IMO.
Suby owners, change your rear gear oil.
Thanks Shawn. Ill call ya end of next week.

[alwaysinboost]

I had a chance to test the alignment out on the strip today, all I have to say is that the car is VERY stable @ high speeds!
Usually when the tires would spin in 3rd gear the car would go sideways. tonight it still spun 3rd but instead of kicking out it stayed perfectly straight so I was able to stay in it, bang 4th, and take it all the way to redline which is something I've never done on street tires before.

awesome work!

[Shawn@R/Ttuning]

Glad it all worked out well for you. Thanks for the solid feedback, nice to hear when our customers enjoy what we do.

[Shawn@R/Ttuning]

An S14 that will see some Time Attack action got the works including corner balancing.
Pictures are shown of the car being set on the scales.
http://farm2.static.flickr.com/1139/1438413013_aee5a7c158.jpg
http://farm2.static.flickr.com/1200/1438412597_646f9380e1.jpg
http://farm2.static.flickr.com/1013/1439272524_cca5b0954b.jpg

[JasterM5]

I also got my alignment done last week. This thing is BADASS!!!

[Shawn@R/Ttuning]

I have driven Ivans car before and after the alignment and it has made a world of difference. He put on coilovers and before the car was aligned it felt very unstable at speed and pulled all over. After the alignment it is much easier to control and goes where you point it. The alignment also saved his tires. Ya for drifting a WRX.

[sean350z]

An S14 that will see some Time Attack action got the works including corner balancing.
Pictures are shown of the car being set on the scales.
http://farm2.static.flickr.com/1139/1438413013_aee5a7c158.jpg
http://farm2.static.flickr.com/1200/1438412597_646f9380e1.jpg
http://farm2.static.flickr.com/1013/1439272524_cca5b0954b.jpg
http://farm2.static.flickr.com/1166/1439272692_6891364f35.jpg


Had the car out today for practice at Summit Point and everything felt great. We'll see how it goes tomorrow when I'm really pushing it. All I need to do now is move my battery to the right rear and I'll be 1/10 of a percentage from ideal corner weight.

Anyone who has coilovers and cares a half a crap about how a car handles needs to get this done. Period.

[sean350z]

http://lh3.google.com/Sean350z/Rv7nWT-zb-I/AAAAAAAAALg/emGAXRCIJr8/s800/turn.jpg

Thanks guys :supz:

[NOPSTNS]

i thought that car looked familiar. glad to see it went well, did u get new tires? i hope u did bc ur rt 615 were dyin and so were mine at our last autox together....im gonna be in the for the works this spring when they mount my secret weapons for next yrs road courses...

anyone else who isnt a poseur be sure to get a real alignment b4 the next track day!!!!!!

see yas soon

[sean350z]

Nitto NT01 255/40/17 ... Yea those Azenis were the suck.

[alwaysinboost]

http://lh3.google.com/Sean350z/Rv7nWT-zb-I/AAAAAAAAALg/emGAXRCIJr8/s800/turn.jpg

Thanks guys :supz:

were you @ shenandoah? that looks like the carosel...

[sean350z]

Yes sir...I didn't do the best but I really wasn't there to compete. I was there more for practice and to drive on a very very technical course to get some fundamentals down. Oh yea and had a bunch of distractions with RedlineTV from Speed Channel taping my runs and asking me questions.

My best lap time was at 1:46

[ScubaSteve]

I'm doing my coilovers this coming weekend so I'll give you a call this week to make an appointment!

[alwaysinboost]

Yes sir...I didn't do the best but I really wasn't there to compete. I was there more for practice and to drive on a very very technical course to get some fundamentals down. Oh yea and had a bunch of distractions with RedlineTV from Speed Channel taping my runs and asking me questions.

My best lap time was at 1:46

Nice, I'll be there this weekend for an HPDE.

I thought they didn't have timers there officially??

[Shawn@R/Ttuning]

Thanks for the feedback guys. Glad to see people know the importance of a good alignment. All your suspension work would be a waste without it being set properly. Also I am jealous that turn looks fun I want to drive there.

http://lh3.google.com/Sean350z/Rv7nWT-zb-I/AAAAAAAAALg/emGAXRCIJr8/s800/turn.jpg

[Shawn@R/Ttuning]

Just did two more moded 240sx's and a Badass supercharged lowered C32 AMG Mercedes. I didn't get a chance to get pictures. I suck I know. :furious:

[Shawn@R/Ttuning]

3000gt aligned and good to go.
http://farm2.static.flickr.com/1104/1490547591_3ea837b557.jpg

[JeEvE]

I just replaced balljoints and some bushings so Ill need to have an alignment done, would I be able to make an appointment sometime early this week?

[Vince@R/TTuning]

^^^ yeah call the shop so we can get ya set up...215 855 5565

[Vince@R/TTuning]

this week is pretty open for alignments...

[alwaysinboost]

vince, sent you a PM...

[Shawn@R/Ttuning]

Sweet Porsche set for Road Racing, Recaro buckets, Big brakes. Big wheels, Sticky tires. The owner is an instructor for the Porsche Club.
http://farm3.static.flickr.com/2272/1619909324_cbd01c71dc.jpg
http://farm3.static.flickr.com/2126/1619910130_3c45ddf405.jpg
Before driver weight and adjustments
http://farm3.static.flickr.com/2335/1619910638_45b9cb6e9c.jpg
http://farm3.static.flickr.com/2252/1619911552_3398a9331c.jpg
http://farm3.static.flickr.com/2013/1619026363_3befeed694.jpg
Worried about your wheels being scratched? Not an issue, these BBS aren't cheap and they have no worries. Our Heads are designed to be save for all wheels.
http://farm3.static.flickr.com/2053/1619913104_1cb94e9a69.jpg
http://farm3.static.flickr.com/2019/1619027669_f5623805ca.jpg

[Shawn@R/Ttuning]

Evo on the scales
http://farm3.static.flickr.com/2318/1526453204_2335b22198.jpg

[Shawn@R/Ttuning]

Road Race 240 H/b
http://farm3.static.flickr.com/2260/1642493344_01e9ab3ada.jpg
http://farm3.static.flickr.com/2366/1642492490_a8c0b85268.jpg

[Shawn@R/Ttuning]

Low Delsol w/all suspension arms
http://farm3.static.flickr.com/2001/1716493576_9fede7a354.jpg
http://farm3.static.flickr.com/2027/1715646123_ae362015e9.jpg

[Shawn@R/Ttuning]

MRS getting aligned and scaled. P.S. It's lighter then your car too.
http://farm3.static.flickr.com/2170/1731632083_88488c506e.jpg
http://farm3.static.flickr.com/2063/1731631561_4ba8e0882c.jpg

[ScubaSteve]

Is that erik's MR2? What did it weigh in at?

[Shawn@R/Ttuning]

Thats a secret..... But it is the lightest car we have had on them so far.

[JNZTuning]

I see how it is...no love for my Evo. :cry:

[Vince@R/TTuning]

shawns a slacker...but we love Evo's and urs feels amazing....

[Shawn@R/Ttuning]

Pat is just so "Good" at what he does, he was in and out before I finished my cheese burger. Then he did this :driving: but his smile was alittle gayer. Said it felt amazing.

[PaleDSM]

Spyder hit the scales at 2215. Light but not light enough.
I can't wait to get the yellow car back and over for an alignment and weigh in.

[Shawn@R/Ttuning]

Ya get your yellow beast in here ASAP so you can enjoy its full potential as well.

[ThatsTheTruth]

Hey, what do you mean by arms? Like the a-arm camber kits or control arms? I have 94 integra with ksport 36 way ajustable coilovers and skunk 2 front camber kit. Can you pm me a price and more details on the alignment

[PaleDSM]

Ya get your yellow beast in here ASAP so you can enjoy its full potential as well.


It's on it's way home this week so I'll be making an appointment for Dec.:banana:

[Shawn@R/Ttuning]

Hey, what do you mean by arms? Like the a-arm camber kits or control arms? I have 94 integra with ksport 36 way ajustable coilovers and skunk 2 front camber kit. Can you pm me a price and more details on the alignment

PM sent

[Shawn@R/Ttuning]

It's on it's way home this week so I'll be making an appointment for Dec.:banana:

Let us know so we can set the date in stone.

[cmr076]

were coming over in an hour with the saleen for a re-align with new tubeular(sp) control arms and some harcore coilovers on the front!

[Shawn@R/Ttuning]

http://farm3.static.flickr.com/2140/2034571613_d4d3e0a1d6.jpg
http://farm3.static.flickr.com/2112/2034571487_24704a1cda.jpg

[cmr076]

^^ steve baileys car?

[Shawn@R/Ttuning]

Maybe............:roll:

[Shawn@R/Ttuning]

Who is next?!!!!!

[Shawn@R/Ttuning]

Winter Discounts on Alignments



Approximate Pricing is as follows;


$ 60: Put a car on the scales to find your total weight.

$ 60: 4 wheel basic alignment

$100: Lowered car on springs W/ Camber, Caster arms

$125: Lowered car on coilovers Damper adjustable WO/ arms. Including seting ride hieght

$175: Lowered car on coilovers Damper adjustable W/ arms. Including us doing ride height adjustments

$275: Lowered car on coilovers Damper adjustable W/ all adjustments. Including us doing corner balancing


Set up appointments now by calling 215-855-5565. Or pm questions to either Shawn@RTTUNING or Vince@RTTUNING. If you are confused about pricing or don't know where you will fit just ask here, call us, or pm us and we will help you.

[Shawn@R/Ttuning]

64 Nova
http://farm3.static.flickr.com/2005/2176638462_88afd034c5.jpg
http://farm3.static.flickr.com/2167/2176638556_c084c74e56.jpg
http://farm3.static.flickr.com/2205/2176638644_425b5d97ba.jpg
http://farm3.static.flickr.com/2021/2176638754_74617e3940.jpg

[Honest_Bob]

I have to admit thats the last car I would ever expect to see on there.

[CarbonIS]

shawn, schedule me for next week.

[Shawn@R/Ttuning]

When? Call the shop 215-855-5565

[Vince@R/TTuning]

I have to admit thats the last car I would ever expect to see on there.

We do them all, we get alot of drag racing guys as well, more then i thought we would...

[Shawn@R/Ttuning]

Most people should know this guys cars. It is Awesome.
Aligning it to fit his badass wheels.
http://farm3.static.flickr.com/2052/2219541268_485bd1123d.jpg
http://farm3.static.flickr.com/2048/2219541188_8a179443a5.jpg

[DPancoast]

Yum. Once I get my suspension setup, I'll be coming to you guys....doing research on what I can do with my stock bolts to benefit me a little in auto-x...we'll talk.

[Shawn@R/Ttuning]

Sounds good. Let us know.

[Omar_MSP]

where's this shop located? i need my car aligned and inspected.

[Vince@R/TTuning]

we are located in lansdale pa 19446 right off of cannon ave. 2 blocks off of main street (RT63)

[Omar_MSP]

ah, an hour away. not bad, i'll stop by next week.

[Vince@R/TTuning]

if your looking to get an alignment you should call and make an appt cause we are 1-2 weeks out at any givin time. but if you just wanna stop by ur more then welcome:mrgreen: 215 855 5565

[Omar_MSP]

alright, i'll schedule an a date thats best for you guys. i'm off mon-weds.

[Vince@R/TTuning]

next mon and wed afternoon is open 12-5..pick which day u want and let me know what ur set up is...

[Omar_MSP]

alright, i'll keep you posted. i get paid tomorrow. expecting a nice check.

[Vince@R/TTuning]

cool... well let us know..everyday we make more appts so dont wait too long or they might get filled thanx again

[.brian.]

hey vince, i sent you a PM but i don't think you got it. we talked a while ago about a spring install/alignment, and i just wanted to know when you guys start having saturday hours again. thanks.

[Vince@R/TTuning]

^^^^ hey brian we are slowly starting our saturday hours again so if you would like to make an appt call the shop or pm me and we can set ya up...sorry for the late response

[CHAOS]

what are the current shop hours?

[Vince@R/TTuning]

M-F 10-8 EST...and we will be starting various saturday hours in late febuary and March

[.brian.]

great. thanks vince. i will be in contact with you guys in the upcoming weeks to set something up.

[Vince@R/TTuning]

cool..let us know

[Shawn@R/Ttuning]

Ariel Atom
http://farm3.static.flickr.com/2411/2281564653_3e41ef1be5.jpg
http://farm4.static.flickr.com/3228/2281564765_9900b73ba8.jpg
http://farm3.static.flickr.com/2178/2281564303_3594cd65d8.jpg
http://farm4.static.flickr.com/3194/2282357076_3f61d53d11.jpg
http://farm4.static.flickr.com/3079/2282380710_3400c270f5.jpg
http://farm4.static.flickr.com/3202/2281564521_e37a20230f.jpg
http://farm3.static.flickr.com/2208/2281594797_1ec87e37f2.jpg

[.brian.]

cool..let us know

PM'ed

[.brian.]

PM'ed again. i would like to set something up for Saturday Morning the 8th of March. i sent my phone# and email in the PM.

[Vince@R/TTuning]

^^^^ sorry i thought i replied, but everything sounds good for the 8th ill call ur cell to confirm, thanx again

[Adam496]

Can you squeeze a car in just for the basic alignment next week?

[Vince@R/TTuning]

yea im sure we could PM or call for a time to set it up, Thanx Vince

[CHAOS]

Who do i need to PM to set up an alignment appointment?

[alwaysinboost]

that ariel atom is the ****.

I might have asked you guys this when I was in last time but can you mount tires? I need new rubber for the Z and another alignment... LMK.

[Vince@R/TTuning]

^^^^^ yea we can take care of mounting balancing and everything for ya...just call the shop and we can get ya in



Who do i need to PM to set up an alignment appointment?

You can PM me for availble times and prices, thanx Vince

[CHAOS]

See you guys on monday!

[.brian.]

see you guys tomorrow morning! i can't wait to get the springs on and the alignment done!

[04AV6 6SPD]

how much is it to get my car alignment done? i have honda accord coupe. i just put in honda factory performance suspension in which lowered car about 1". as far as i was told i dont need camber kit

[Vince@R/TTuning]

all PM's replied too...

[Omar_MSP]

i can't wait for wednesday!

[01bb6er]

Hey Guys,
I talked to Vince on the phone yesterday about getting my 2001 Prelude aligned, corner balanced, and adjusting height of the coilovers. I would like to work out a price. Vince said I will also need some upper control arms and I was thinking about some wheels. I'm looking at the enkei racing series, possibly 17" Rs7 in bronze, but i'm open to suggestions. I would like to keep the price for wheels and tires around $1000 or so. Just let me know what you think. One more quick question, what is the need for upper control arms? Never really heard of needing those for an alignment. Are they needed to adjust camber?

Thanks,
Glen

[CHR!S]

how far in advanced would i need to schedule an appointment to get my s2000 done? im gonna need an allignment, camber/toe adjustment, and corner balancing (the $275 option)

[Vince@R/TTuning]

we could get ya in sometime next week, we have been aligning about two s2k's a week for the past 4 weeks...must be SCCA season..:mrgreen:

[CHR!S]

i havent gotten my suspension in yet, it comes in may 1st. then my 21st bday is may 11th and i come home from cali may 20th... so im prob not gonna be doing much in that time.... plus i need my fenders rolled (do you guys do that as well?)

most tracks wont allow me on the track without a one-piece rollbar and/or a hardtop... next year im gonna be making it out to several hpde events & open track days. my friend chris runs honda challenge (the red passwordjdm ek hatch) so hes gonna be my instructor

[PhillySVT]

I'm calling you guys tommorow.

[04AV6 6SPD]

if possible i need basic alignment done sometime tommorow(pm sent earlier)

[Matt@R/Ttuning]

is everyone up to date and taken care of alignment wise?? we have some free space if anyone wants to squeak in.

[russiankid]

Hey guys,

I need an alignment done, but not sure if it would be under four wheel alignment. I replaced my rack and pinion about a year ago, and had Firestone do an alignment. However, they did not center the rack and steering wheel. They used the tie rod ends to center everything. So now the ball joints are at their limit. From what I know, the rack is centered alone and then the steering wheel is centered after replacing the rack, which is what Firestone neglected to do.

So how much would it cost to do this type of alignment? I am just planning my expenses out ahead of time so this may not be for another month or two.

Thanks.

[04AV6 6SPD]

i need it soon too but have to put in camber kit in back

[CHR!S]

i need my car alligned, the camber adjusted, and corner balanced as soon as possible. when would the soonest day id be able to bring the car up there and have it done?

[Vince@R/TTuning]

call the shop to set somthin up...possibly tommorrow if everything works out....

[CHR!S]

dropping the car off tonight @ around 7 :thumbup:

[TROLL]

I gotta get the Subie out to you guys for an alignment... bonus points if you can troubleshoot my mystery knock too...

[Matt@R/Ttuning]

I gotta get the Subie out to you guys for an alignment... bonus points if you can troubleshoot my mystery knock too...

Lets do this troll man..
Call me at the shop
215-855-5565
hearts,
Matt

[freewilly]

it says that you can get the proper parts to correct bump steer. Can you ellaborate on this a little bit?

[Vince@R/TTuning]

If available... we can get mount adjustable outer tie rod ends and dial in the correct angle to minimize bumpsteer...

[subwrxkid]

are you guys available next Saturday to do an alignment on an sti? Tein flex, camber adjustment, as well as ride height.

So is that $125?

[Vince@R/TTuning]

Sorry but we don't have Saturday hours currently, but we are open later during the week to accommodate schedules. Give us a call if you want to schedule something. 215 855 5565 thanx....

[subwrxkid]

How late during the week? How long will it take to do the alignment?

[Vince@R/TTuning]

open till 8PM M-F and if we are doing everything including ride height plan on spending 2-3 hours here and your looking @ $200.00 for everything

[subwrxkid]

$200 includes me bring you a car with the coilovers just installed, and you will set the height, pre-load, everything?

[Vince@R/TTuning]

^^^ yes Sir!! as that includes everything...

[noclutch]

Vince/Matt,
Looking to get on the schedule next week for an alignment and dyno time. Give me a ring tomorrow when you's are at the shop

Hugs and kisses,
Stefan

[04AV6 6SPD]

i talked to Vince long time ago. i need to get rear camber on and rear aligned. he quoted me $150 for that. when you got time?

[CHR!S]

i got my car alligned/camber adjusted/corner balanced by you guys back in june, just seeing how much it would cost to get just the front camber adjusted?

[jdm free]

need an alignment. 08 civic si 4dr, lowered on 1.4" springs, no camber kit. price? wont be gettin it done for about 3 weeks once it settles

[Buster]

I would also like to schedule for some time in the next few weeks.

2005 WRX

Ivan's old Megan Racing Track Coilovers (Possible ride height adjustments) Coilovers are frozen on all corners but driver side.
HR Camberbolts for the rear.

My rear has alot of negative camber on the passenger side, I feel close to a whole degree more than the driver.
My steering wheel is also a little off but it hasn't been aligned again in about 47k.

You guys are my only help, I'm too low to get on anyone else rack. PM me and let me know what we can do and how much.