S.Milone
07-11-2007, 04:15 PM
Hondata Heatshields, Thermalnator, Apex I Phenolic gasket
Even the Governator says it cools your intake air.
Hondata Heat Shields
http://www.authentics.com.au/persistent/catalogue_images/products/schwarzyfreez3lp.jpg
The Heatshield is a replacement intake manifold gasket made from special high temperature plastic, designed to insulate the intake manifold from the cylinder head.
http://farm2.static.flickr.com/1159/525353078_8479084c7d.jpg
Hondata have developed a special high temperature insulating gasket which replaces the stock intake gasket. This and bypassing several heat sources significantly reduces the transfer of heat from the head to the intake and incoming air giving you up to 5% more power.
Turbocharged cars often use an aluminum intercooler to cool the air compressed by the turbo. The intake manifold is also made of aluminum but because it is heated by the head from combustion, works in reverse to an intercooler by heating the intake air by as much as 50° C.
Fact: For every 3.3 °C (5° F) rise in intake temperature, air density drops 1%. The hotter the air, the less fuel the computer injects to compensate for reduced oxygen. HondaLogger datalogging software has enabled us to measure intake air temperature under varied driving conditions.
Around town, testing has shown an average drop of around 10 degrees C which is good for around 3 percent power increase. Remember though that 3 percent power increase is difficult to feel. You'd feel a greater change in performance getting rid of that passenger. In certain conditions a 30° C drop has been measured.
We have these Hondata Gaskets (in bold) in stock pm me to order.
Honda/Acura
* B16A/B18C5
* D16 (92-2000 SOHC)
* B18C
* B18A/B18B
* H22A
* F22-VTEC
* ZC/D16A1(DOHC)
* K20A2, K20A, K20A3, K20Z1 (RSX, 02-05 Civic SI, CRV))
* K20Z3, K24A2 (TSX, Accord, Element, 06-07 Civic SI)
* S2000
Toyota Celica GT-S and Matrix
Mitsubishi 90-94 & 95-99 Eclipse turbo, and Lancer Evo
Nissan 350Z & G35, Sentra SER Spec-V, SR20DET (high port)
Hyundai Tiburon V6 and I4
Mazda 90-93 Miata 1.6L, 94-97 Miata 1.8L, 99-up Miata 1.8L
Subaru WRX
Dodge SRT4, 95-00 Neon 2.0L and 2.4L
http://www.worldkids.net/kids/blizzardlive/b&r/9.jpg
Thermalnator
http://www.thermalnator.com/thermalnatorgasket2.jpg
Thermalnator is a unique high temperature shielding gasket which replaces the stock intake manifold gasket. Thermalnator’s cooling properties reduce heat by stopping metal to metal contact between the intake manifold and the engine block. By using a Thermalnator gasket, you will reduce the heat of the air entering your engine, making up to 5% more power. Thermalnator gaskets allow the intake manifold to perform like an intercooler. Because the manifold is no longer heated by the cylinder head, the heat from incoming air can dissipate through the aluminum very rapidly. The basic formula for this is for every 5 degrees F increase in intake air temp, air density is reduced by 1%. The denser the air is, the better the gain in horsepower. Average testing has shown an 11 degrees F drop and up to 35 degrees in some applications. This is why a Thermalnator gasket is an excellent upgrade for your vehicle if it’s stock or modified.
What they make: Pm for pricing.
Honda / Acura
1999-2000 Civic Si (B16A2)
2002-2007 Civic Si
2000-2006 S2000 (F20/22C)
2002-2006 RSX JDM Base, Type S and Type R (K20A/A2/Z)
2002-2006 CRV LX/EX/SE 2/4WD (B20)
1992-1993 Integra GSR (B18C1)
1994-1997 Del Sol DOHC (B16A2)
2000-2001 Integra Type R (B18C5)
1994-2001 Acura Integra GSR (B18C1)
93-96 Prelude VTEC (H22A)
97-01 Prelude ALL (H22A)
2004-2006 TSX (K24A)
2003-2007 Accord 4 Cyl.
2003-2007 Element 4 Cyl.
1990-2001 Integra LS/GS/RS (B18A/B)
1998-2001 CRV LX/EX/SE
Nissan / Infiniti
S13 SR20DET
S14 SR20DET
RB20DET
RB25DET
RB26DETT
1991-1994 240SX (KA24)
1991-1996 Infiniti G20
1999-2002 Infiniti G20
1998-2001 Nissan Sentra SE
1991-1994 Nissan Sentra SE-R
1995-1998 Nissan 200 SX SE-R
2003-2006 G35
2003-2006 FX35
2002-2004 I35
2006-2007 M35
2003-2006 350Z
2002-2006 Altima
2002-2007 Maxima
2003-2007 Murano
2005-2006 Pathfinder
2004-2007 Quest
2005-2006 Xterra
2005-2006 Frontier
Subaru
04-06 Baja 2.5 Turbo
04-06 Forester Turbo
02-06 Impreza WRX
04-06 Impreza STi
Toyota
1993-1998 Supra Turbo
00-05 Celica GTS
05-06 Corolla XRS
02-06 Matrix XRS 2WD
Mitsubishi
90-98 Talon TSI Turbo
95-98 Talon TSI Turbo AWD
95-99 Eclipse Turbo
94 Galant 2.4 DOHC
VW / Audi
VW
98-05 VW Bettle 4CYL (AEG,AZG,AVH,BEH) 2.0L
95-02 VW Cabrio (ABA) 2.0L
93-06 VW Golf GL/GLS (ABA) 2.0L
93-00 VW Golf GTI (ABA,AEG) 2.0L
93-05 VW Jetta GL/GLS (ABA,ABA) 2.0L
01-05 VW JETTA Wagon (AZG,AVH,BEV) 2.0L
95-96 VW Passat GL (ABA) 2.0L
98-99 Passat 1.8T - Large Port
1.8T - Small Port
AUDI
00-02 Audi S4 2.7L
00-04 Audi A6 Quattro Turbo 2.7L
01-05 Audi Allroad Quattro 2.7L
97-00 Audi A4 1.8T
Mazda
1990-1993 Miata 1.6
1994-2005 Miata 1.8
1995-2000 Protege ES
1990-1994 Protege LX
1990-1991 AWD Protege
Porsche
87-88 924S
83-89 944 - All - except 87-89 944S/S2
http://www.wdr.de/themen/kultur/2/politiker_als_schauspieler/_img/schwarzenegger_400h.jpg
Apex I Phenolic Gasket
http://www.apexi-usa.com/graphics/products/2681.jpg
The Gizzmo thermal gasket acts as a barrier, stopping heat transfer from the engine block to the intake manifold. Stopping this heat transfer results in a cooler intake temperature charge. A cooler intake air temperature increases engine power much the same way an intercooler does, however the thermal intake manifold gaskets can benefit both turbo and non-turbo vehicles.
The Gizzmo thermal gasket is made of hard, dense material by applying heat and pressure to layers of paper and glass cloth impregnated with synthetic resin. These layers are laminations of cellulose paper, cotton fabrics, synthetic yarn, glass fabrics, and unwoven fabrics.
When heat and pressure are applied to the layers, a chemical reaction (polymerization) transforms the layers into a high-pressure thermosetting industrial laminated plastic.
CONCEPT:
Thermal intake manifold gasket prevents heat soak from transferring from the engine block to the intake manifold, resulting in a cooler intake charge.
CHARACTERISTICS:
* More power and torque * Better throttle response * Improved fuel economy
Cars they are offered for: PM for pricing
Honda B16A
Honda B18C
Honda F20
Honda H22A
Honda/Acura K20A
Nissan S13 SR20
Nissan S14/15 SR20
Nissan RB26
Nissan RB25
Nissan VQ35
Mazda 13B S4 & S5
Mazda 13B S6 & S7
Mitsubishi 4G63
Subaru EJ25
Subaru EJ20
Toyota 2JZ-GTE
Toyota 3S-GTE
Even the Governator says it cools your intake air.
Hondata Heat Shields
http://www.authentics.com.au/persistent/catalogue_images/products/schwarzyfreez3lp.jpg
The Heatshield is a replacement intake manifold gasket made from special high temperature plastic, designed to insulate the intake manifold from the cylinder head.
http://farm2.static.flickr.com/1159/525353078_8479084c7d.jpg
Hondata have developed a special high temperature insulating gasket which replaces the stock intake gasket. This and bypassing several heat sources significantly reduces the transfer of heat from the head to the intake and incoming air giving you up to 5% more power.
Turbocharged cars often use an aluminum intercooler to cool the air compressed by the turbo. The intake manifold is also made of aluminum but because it is heated by the head from combustion, works in reverse to an intercooler by heating the intake air by as much as 50° C.
Fact: For every 3.3 °C (5° F) rise in intake temperature, air density drops 1%. The hotter the air, the less fuel the computer injects to compensate for reduced oxygen. HondaLogger datalogging software has enabled us to measure intake air temperature under varied driving conditions.
Around town, testing has shown an average drop of around 10 degrees C which is good for around 3 percent power increase. Remember though that 3 percent power increase is difficult to feel. You'd feel a greater change in performance getting rid of that passenger. In certain conditions a 30° C drop has been measured.
We have these Hondata Gaskets (in bold) in stock pm me to order.
Honda/Acura
* B16A/B18C5
* D16 (92-2000 SOHC)
* B18C
* B18A/B18B
* H22A
* F22-VTEC
* ZC/D16A1(DOHC)
* K20A2, K20A, K20A3, K20Z1 (RSX, 02-05 Civic SI, CRV))
* K20Z3, K24A2 (TSX, Accord, Element, 06-07 Civic SI)
* S2000
Toyota Celica GT-S and Matrix
Mitsubishi 90-94 & 95-99 Eclipse turbo, and Lancer Evo
Nissan 350Z & G35, Sentra SER Spec-V, SR20DET (high port)
Hyundai Tiburon V6 and I4
Mazda 90-93 Miata 1.6L, 94-97 Miata 1.8L, 99-up Miata 1.8L
Subaru WRX
Dodge SRT4, 95-00 Neon 2.0L and 2.4L
http://www.worldkids.net/kids/blizzardlive/b&r/9.jpg
Thermalnator
http://www.thermalnator.com/thermalnatorgasket2.jpg
Thermalnator is a unique high temperature shielding gasket which replaces the stock intake manifold gasket. Thermalnator’s cooling properties reduce heat by stopping metal to metal contact between the intake manifold and the engine block. By using a Thermalnator gasket, you will reduce the heat of the air entering your engine, making up to 5% more power. Thermalnator gaskets allow the intake manifold to perform like an intercooler. Because the manifold is no longer heated by the cylinder head, the heat from incoming air can dissipate through the aluminum very rapidly. The basic formula for this is for every 5 degrees F increase in intake air temp, air density is reduced by 1%. The denser the air is, the better the gain in horsepower. Average testing has shown an 11 degrees F drop and up to 35 degrees in some applications. This is why a Thermalnator gasket is an excellent upgrade for your vehicle if it’s stock or modified.
What they make: Pm for pricing.
Honda / Acura
1999-2000 Civic Si (B16A2)
2002-2007 Civic Si
2000-2006 S2000 (F20/22C)
2002-2006 RSX JDM Base, Type S and Type R (K20A/A2/Z)
2002-2006 CRV LX/EX/SE 2/4WD (B20)
1992-1993 Integra GSR (B18C1)
1994-1997 Del Sol DOHC (B16A2)
2000-2001 Integra Type R (B18C5)
1994-2001 Acura Integra GSR (B18C1)
93-96 Prelude VTEC (H22A)
97-01 Prelude ALL (H22A)
2004-2006 TSX (K24A)
2003-2007 Accord 4 Cyl.
2003-2007 Element 4 Cyl.
1990-2001 Integra LS/GS/RS (B18A/B)
1998-2001 CRV LX/EX/SE
Nissan / Infiniti
S13 SR20DET
S14 SR20DET
RB20DET
RB25DET
RB26DETT
1991-1994 240SX (KA24)
1991-1996 Infiniti G20
1999-2002 Infiniti G20
1998-2001 Nissan Sentra SE
1991-1994 Nissan Sentra SE-R
1995-1998 Nissan 200 SX SE-R
2003-2006 G35
2003-2006 FX35
2002-2004 I35
2006-2007 M35
2003-2006 350Z
2002-2006 Altima
2002-2007 Maxima
2003-2007 Murano
2005-2006 Pathfinder
2004-2007 Quest
2005-2006 Xterra
2005-2006 Frontier
Subaru
04-06 Baja 2.5 Turbo
04-06 Forester Turbo
02-06 Impreza WRX
04-06 Impreza STi
Toyota
1993-1998 Supra Turbo
00-05 Celica GTS
05-06 Corolla XRS
02-06 Matrix XRS 2WD
Mitsubishi
90-98 Talon TSI Turbo
95-98 Talon TSI Turbo AWD
95-99 Eclipse Turbo
94 Galant 2.4 DOHC
VW / Audi
VW
98-05 VW Bettle 4CYL (AEG,AZG,AVH,BEH) 2.0L
95-02 VW Cabrio (ABA) 2.0L
93-06 VW Golf GL/GLS (ABA) 2.0L
93-00 VW Golf GTI (ABA,AEG) 2.0L
93-05 VW Jetta GL/GLS (ABA,ABA) 2.0L
01-05 VW JETTA Wagon (AZG,AVH,BEV) 2.0L
95-96 VW Passat GL (ABA) 2.0L
98-99 Passat 1.8T - Large Port
1.8T - Small Port
AUDI
00-02 Audi S4 2.7L
00-04 Audi A6 Quattro Turbo 2.7L
01-05 Audi Allroad Quattro 2.7L
97-00 Audi A4 1.8T
Mazda
1990-1993 Miata 1.6
1994-2005 Miata 1.8
1995-2000 Protege ES
1990-1994 Protege LX
1990-1991 AWD Protege
Porsche
87-88 924S
83-89 944 - All - except 87-89 944S/S2
http://www.wdr.de/themen/kultur/2/politiker_als_schauspieler/_img/schwarzenegger_400h.jpg
Apex I Phenolic Gasket
http://www.apexi-usa.com/graphics/products/2681.jpg
The Gizzmo thermal gasket acts as a barrier, stopping heat transfer from the engine block to the intake manifold. Stopping this heat transfer results in a cooler intake temperature charge. A cooler intake air temperature increases engine power much the same way an intercooler does, however the thermal intake manifold gaskets can benefit both turbo and non-turbo vehicles.
The Gizzmo thermal gasket is made of hard, dense material by applying heat and pressure to layers of paper and glass cloth impregnated with synthetic resin. These layers are laminations of cellulose paper, cotton fabrics, synthetic yarn, glass fabrics, and unwoven fabrics.
When heat and pressure are applied to the layers, a chemical reaction (polymerization) transforms the layers into a high-pressure thermosetting industrial laminated plastic.
CONCEPT:
Thermal intake manifold gasket prevents heat soak from transferring from the engine block to the intake manifold, resulting in a cooler intake charge.
CHARACTERISTICS:
* More power and torque * Better throttle response * Improved fuel economy
Cars they are offered for: PM for pricing
Honda B16A
Honda B18C
Honda F20
Honda H22A
Honda/Acura K20A
Nissan S13 SR20
Nissan S14/15 SR20
Nissan RB26
Nissan RB25
Nissan VQ35
Mazda 13B S4 & S5
Mazda 13B S6 & S7
Mitsubishi 4G63
Subaru EJ25
Subaru EJ20
Toyota 2JZ-GTE
Toyota 3S-GTE