Block sleeving in Tri-State area.

[LSHatch]

Is there anyone around here, at least in the northeast that can put aftermarket sleeves into a block?

That's all I need to know. Someone help me.

[igo4bmx]

Is there anyone around here, at least in the northeast that can put aftermarket sleeves into a block?

That's all I need to know. Someone help me.

what motor?
www.fsmoto.com does ERL sleeving

[LSHatch]

what motor?
www.fsmoto.com does ERL sleeving

F20.

I'll check them out. Thanks.

[auk113]

impo performance does it too
but be ware they use a plonger when it comes the paying

[igo4bmx]

what motor?
www.fsmoto.com does ERL sleeving

F20.

I'll check them out. Thanks.

oh man
you gonna do a crazy build?
i suggest ERL or benson for sleeving...

[03tarmacblack]

IMPO is good and honest people....im there about once a week getting odds and ends to finish my weekly mod :D

[LSHatch]

oh man
you gonna do a crazy build?
i suggest ERL or benson for sleeving...

Something like that. ;)



As for Impo, no thanks guys. I'm not a big fan of them and their insane prices. I don't know how they are now, but from past experiences.....

[igo4bmx]

oh man
you gonna do a crazy build?
i suggest ERL or benson for sleeving...

Something like that. ;)



As for Impo, no thanks guys. I'm not a big fan of them and their insane prices. I don't know how they are now, but from past experiences.....

well if you're sleeving a honda, there are only a select few sleeving companies I trust

Benson (contact Earl from honda-tech) - about $950 bucks
ERL (contact First State Motorsports) - about $1500 bucks ( i think)

you can't go wrong with either- benson is an open deck design, while ERL uses a pressed fitted "blockguard" type structure to add rigidity to the top of the sleeves, but please don't compare their sleeving with a blockguard.

[LSHatch]

well if you're sleeving a honda, there are only a select few sleeving companies I trust

Benson (contact Earl from honda-tech) - about $950 bucks
ERL (contact First State Motorsports) - about $1500 bucks ( i think)

you can't go wrong with either- benson is an open deck design, while ERL uses a pressed fitted "blockguard" type structure to add rigidity to the top of the sleeves, but please don't compare their sleeving with a blockguard.

I've talked to a Earl a few times on H-T. I'll have to PM him and see how quickly he can get it done. Now, between the two, the prices should end up similar because of the shipping to Earl down in TX or wherever he is.

I'll call fsmoto today.

[markley02]

Martin Motors in Morrisville. on bridge street a couple hundred feet from 7-11.

[igo4bmx]

well if you're sleeving a honda, there are only a select few sleeving companies I trust

Benson (contact Earl from honda-tech) - about $950 bucks
ERL (contact First State Motorsports) - about $1500 bucks ( i think)

you can't go wrong with either- benson is an open deck design, while ERL uses a pressed fitted "blockguard" type structure to add rigidity to the top of the sleeves, but please don't compare their sleeving with a blockguard.

I've talked to a Earl a few times on H-T. I'll have to PM him and see how quickly he can get it done. Now, between the two, the prices should end up similar because of the shipping to Earl down in TX or wherever he is.

I'll call fsmoto today.

i saw your sig... i'm glad you're doing a build up
did you see the 852 whp s2000 from super street?
Earl built the motor

[LSHatch]

i saw your sig... i'm glad you're doing a build up
did you see the 852 whp s2000 from super street?
Earl built the motor

Yeah, the "852 whp" S2000. It's a myth. Even Earl is skeptical about it.

Looks like it will most likely be going to Earl at the moment. I talked to him on the phone for about a half hour today.

[raunch]

I should run you and spank you now before the monster is unleash! :rock:

Talk to Jeff - Boosted-Hybrid - If you need his phone number, let me know. This guy is the best of the best.

Josh and Dan from First State motor are the **** too. I'm glad we are sorrounded by these ppl.

[doug]

No doubt, fsmoto is perfect for what you want. they did my spec-v, and are doing my block also. A++++++

[FSM_Josh]

LSHatch--Before you spend the money, spend a half hour on the phone with us. You should definitely give ERL consideration, we can offer you things Benson simply cannot. Wanna really make serious power? How about an offset dry sleeve and a 92mm bore? ERL has some serious f,k, and b series possibilities, and we can work with you depending on the power level you are trying to reach. We have done several S2k's and have core shortblocks in stock, so a little downtime can be avoided. We have met before actually, I used to handle a few cars down in the city with one of my integras and remeber meeting you a couple times. Give us a call and check out the shop one of these days, we have sleeved B blocks just hanging out.

Josh
302-798-7000

[doug]

yeah boy... make some more sick power josh..

[LSHatch]

LSHatch--Before you spend the money, spend a half hour on the phone with us. You should definitely give ERL consideration, we can offer you things Benson simply cannot. Wanna really make serious power? How about an offset dry sleeve and a 92mm bore? ERL has some serious f,k, and b series possibilities, and we can work with you depending on the power level you are trying to reach. We have done several S2k's and have core shortblocks in stock, so a little downtime can be avoided. We have met before actually, I used to handle a few cars down in the city with one of my integras and remeber meeting you a couple times. Give us a call and check out the shop one of these days, we have sleeved B blocks just hanging out.

Josh
302-798-7000

Josh,

We've met before?? I don't really remember meeting you, but if you can refresh my memory, that would be good.

The problem for me is, I move from the east coast Sept 1. I'm gone. I can't have the car stuck here while I'm in Vegas. That's what my biggest problem is.

I'll give you a call tomorrow probably and we can talk.

[igo4bmx]

LSHatch--Before you spend the money, spend a half hour on the phone with us. You should definitely give ERL consideration, we can offer you things Benson simply cannot. Wanna really make serious power? How about an offset dry sleeve and a 92mm bore? ERL has some serious f,k, and b series possibilities, and we can work with you depending on the power level you are trying to reach. We have done several S2k's and have core shortblocks in stock, so a little downtime can be avoided. We have met before actually, I used to handle a few cars down in the city with one of my integras and remeber meeting you a couple times. Give us a call and check out the shop one of these days, we have sleeved B blocks just hanging out.

Josh
302-798-7000

Josh,

We've met before?? I don't really remember meeting you, but if you can refresh my memory, that would be good.

The problem for me is, I move from the east coast Sept 1. I'm gone. I can't have the car stuck here while I'm in Vegas. That's what my biggest problem is.

I'll give you a call tomorrow probably and we can talk.

i hope you go ERL
they are seriously making big numbers in the honda world.