PDA

View Full Version : Introduction


Verocious
04-06-2007, 02:06 PM
Hi Everyone,

I just wanted to take a minute and let you know a little about who Verocious Motorsports is.

Our company is two fold...

One side of the business is a stocking distributor/retailer of high performance parts, with a focus on fabrication components for both the intake and exhaust side of the motor. (Please note that we have access to many other parts, the ones listed below are the ones that we keep as regular stock items)

This includes:
Air Filters
Air Intake Systems
Catalytic Converters
Clamps
Exhaust Systems
Exhaust Tips
Flanges & Gaskets
Flexible Couplings
Hangers & Supports
Headers & Manifolds
Intercoolers
Mandrel Bends
Merge Collectors
Mufflers
Reducers
Resonators
Schedule 10
Sensor Rings & Bungs
Silicone
Tubing
Turbo Accessories
Turbos

In addition to the fabrication components, we also carry the following lines:
Aero Exhaust
High Temp Silicone
S&B Filters & Intake Kits
Thermopol
Torca Clamps
Turbonetics
Vibrant Performance

The other side of the business is Tuning and Services, which is equipped with an AWD DynoJet. We recently acquired the shop formerly known as Xotic Motorsports, whom many of you are familiar with. We are happy to have Andy from Xotic join the Verocious Team, and he will continue with us as the new Shop Manager. We are going to be relocating the shop to our Wilmington, DE facility, and will have it up and fully functional by the first week of May (work is currently being done in Cochranville until that time). We feel with our facilities strategic location off of both 95 and 495, that accessibility will be more convenient for everyone.

The shop specializes in:
Tuning
Complete High Performance Tuning Services done in-house on our AWD DynoJet dyno
EcuTek Software for Mitsu EVO, Subaru WRX and STI, Legacy, and Saab 9-2x
Revo Software for VW's and Audi's
HP Tuner Software for Domestics

Engine
Engine Builds – Race or Street
Engine Swaps
Nitrous Systems
Alcohol and Water Injection
Ignition
Timing Adjustments, Tensioners, Chain and Belt replacement
Wiring

Turbos
Custom Turbo Kits
Turbo Kit Installations
Blow-off Valves, Wastegates
Custom Intercooler Installs
Intercooler Kit Installs

Powertrain
Transmission Rebuilds and Upgrades
Differential Rebuilds and Upgrades
Limited Slip Rebuilds and Upgrades
Clutch Replacements and Upgrades
Drive Shaft Replacements and Upgrades

Misc.
Brake Service and Upgrades
Suspension Installs, Upgrades and Service
Electrical Wiring
Interior Upgrades
We will also install your aftermarket parts for you.

We look forward to the many new relationships that lie ahead, and thank you for your support.

For more details please visit our website at
www.verociousmotorsports.com

Or if you have questions, please email us at
sales@verociousmotorsports.com

Kind Regards,
The Verocious Team

Honest_Bob
04-06-2007, 02:18 PM
Welcome aboard! I'll deffinitly be stopping by in the future for a retune. :mrgreen:

S4toSTI
04-06-2007, 02:21 PM
Welcome guys happy to have you'll here.

tjf
04-06-2007, 02:29 PM
welcome to TsT

RyanG
04-07-2007, 12:32 PM
Hey guys, I deal with Andy quite a bit as well as get 99% of my fab stuff from you.
Are you able to get Subaru EJ series exhaust manifold flanges??

~addicted2boost
04-07-2007, 12:37 PM
alright someone is finally comin to de! theres realy only one shop around here and thats carv2 sry if anyone is a fan but there assholes or atleast when i was there good to c another shop comin in the area! ill deff. be checkin u guys out

Verocious
04-09-2007, 08:23 AM
Thanks for the warm welcome everyone

Verocious
04-09-2007, 08:33 AM
Hey guys, I deal with Andy quite a bit as well as get 99% of my fab stuff from you.
Are you able to get Subaru EJ series exhaust manifold flanges??

Unfortunately this is not something we currently have access to.

doug
05-18-2007, 01:10 AM
alright someone is finally comin to de! theres realy only one shop around here and thats carv2 sry if anyone is a fan but there assholes or atleast when i was there good to c another shop comin in the area! ill deff. be checkin u guys out

Not to throw you under the bus, but I never had a problem with CarV2 at all. They are great people. So is Jake and Andy from Verocious.. that's why I'm taking my car there.

1gmfanatik
05-18-2007, 01:36 AM
Welcome...Nice to see some more peeps working with the HP software for us Domestics..

roccobladr
05-18-2007, 09:51 AM
do you guys have any experience using HPTuner with the 2.4 cobalt ss wth vvt?

Verocious
05-18-2007, 01:28 PM
Havent tuned any of the non SC Cobalts yet but I do have alot of experience tuning variable valve control systems on Evos, STis, and K series Honda motors.

roccobladr
05-18-2007, 06:41 PM
cool! ill have to hit you guys up after i get my new injectors and stuff.