Best places to get exhaust pipe work

[qwikhas]

I'm doing a little research on some mods that I want to do on my 06 maxima and I wanted to know if you guys could point me to a shop that does good exhaust pipe work. I want to install some magnaflow mufflers but i know that i will have to have the pipes redone at least from the Y split. So if anyone has a suggestions on a shop in Philly or within 25 miles of philly that does quality work at a fair price, i'd appreciate it.

[Honduh]

any muffler shop that can do mandrel bends is good. possibly ask to see if they have pictures of previous work, which i don't think a muffler shop would. But yeah doing exhaust isn't hard. Just bending and welding.

[SoStock92]

LOL any shop that can do mandrel bends isn't an exhaust shop - they're a mass production pipe shop. Mandrel benders are in the hundreds of thousands of dollars in cost - if you find a muffler shop with a true mandrel bender please let me know ;)

[Crzyguy972]

i went to richoboro foreign cars i think its called. ill look up the exact name i belive it is that. they did a top quality jobs and had no problems iwth anything. i had exhaust hangers installed and everything. ill get you the number tomrow.

[Ronin Tactical]

Check with Justin at Monro in Souderton - my son, Derek, will also work there through tomorrow, then he's moving out of state. They fab up stuff all the time using 3"-4" pipe, and we get our mandrel bends from Jeg's (www.jegs.com) - cheap, fast shipping, etc.

We just did the exhaust on the GTO today - sounds incredible.

[240sxDann]

LOL any shop that can do mandrel bends isn't an exhaust shop - they're a mass production pipe shop. Mandrel benders are in the hundreds of thousands of dollars in cost - if you find a muffler shop with a true mandrel bender please let me know ;)

http://www.vansantent.com/mandrel_bending_machines.htm

[SoStock92]

http://www.vansantent.com/mandrel_bending_machines.htm

Starting at $35k WITHOUT TOOLING for a 3" bender. Go find one that does 7/8 - 6" and we'll talk :)

[240sxDann]

yea true but I doubt an exhaust shop needs to bend 6" pipe.

[qwikhas]

i went to richoboro foreign cars i think its called. ill look up the exact name i belive it is that. they did a top quality jobs and had no problems iwth anything. i had exhaust hangers installed and everything. ill get you the number tomrow.


Aiight, i'll keep checking back here for the number.

Jim, I'll check into that as well.

Thanks e1 for the input.

[SoStock92]

yea true but I doubt an exhaust shop needs to bend 6" pipe.

It's actually the smaller diameter piping that is more difficult/expensive. If the exhaust shop wants to cater to diesel pickups, 5" - 6" exhaust is nothing.

[240sxDann]

It's actually the smaller diameter piping that is more difficult/expensive. If the exhaust shop wants to cater to diesel pickups, 5" - 6" exhaust is nothing.

touche. I bow to you. lol yea your right, wasn't really thinkin of that.

[gpzjack]

I haven't used them but they seem decent mightymuffler.net not far from 95

[turbo4g63]

a friend of mine goes to some place towards ephrata, they are amish, they'll do an exhaust for like 150 installed

[peteyturbo]

Mufflex in trenton is the best around hands down when it comes to custom mandrel bent systems, they can also make awesome custom tubular turbo manifolds..

[jdm free]

wat about low cost exhaust, they did an exhaust for my dad's 01 vette a few yrs ago n it was nice n they also did an 1 for his 68 mustang