View Full Version : Budriss Motorports Srt-4
here are some pic of Budriss Motorsport's Srt-4, waiting to be delivered. it will be here sat
http://i5.photobucket.com/albums/y191/04turbospec/attachment.jpg
http://i5.photobucket.com/albums/y191/04turbospec/attachment-5.jpg
http://i5.photobucket.com/albums/y191/04turbospec/attachment-4.jpg
http://i5.photobucket.com/albums/y191/04turbospec/attachment-3.jpg
http://i5.photobucket.com/albums/y191/04turbospec/attachment-2.jpg
http://i5.photobucket.com/albums/y191/04turbospec/attachment-1.jpg
Crzyguy972
11-16-2006, 06:44 PM
nice like the rims alot
boostedfury
11-16-2006, 06:44 PM
nice man what kinda power is under the hood.
Renegade_
11-16-2006, 06:47 PM
Its probably stage 3 already
nice man what kinda power is under the hood.
ya thats confidential
Honest_Bob
11-16-2006, 06:53 PM
Looks nice man!
04 Turbo Spec
11-16-2006, 06:57 PM
it has stage 2 with toys
and the the wheels are forge line wheels which are made to order
they are the spec wheels we run in the series.
and as you all can see we still have to do quite a but of work to get it race ready.
greg look at the 1st pic, it is a 6 point
Black Power
11-16-2006, 07:29 PM
nice, going to be a full race or street also?
nice, going to be a full race or street also?
Full race setup, By Budriss Motorsports
05OCsrt-4
11-16-2006, 08:15 PM
here are some pic of Budriss Motorsport's Srt-4, waiting to be delivered. it will be here sat
are they a vender here? and what is their website by chance?
04 Turbo Spec
11-16-2006, 08:25 PM
are they a vender here? and what is their website by chance?
will be, a vender in the summer
and there is no website
04 Turbo Spec
11-16-2006, 08:26 PM
greg look at the 1st pic, it is a 6 point
yea your right. after looking at it closer i see the 6 point
04 Turbo Spec
11-16-2006, 08:26 PM
nice, going to be a full race or street also?
it will be a full race car. look for the build in the members journals section
04 Turbo Spec
11-16-2006, 08:55 PM
i just realized im a post whore woot
Hopefully we will get a website that would be cool,
are they a vender here? and what is their website by chance?
Budriss Motorsports Is 04 Turbo spec, Me BMS, and somtimes 96s14, we built his car. oh ya drew when r u getting the diff, so we can put it in?(Also put in Troll's Trans.) In the near furture Budriss Motorsports will be a full blown company hopefully, we are already succesful in the performance Racing League in GT-1, now next year we will enter the Srt-4 in the Neon Racing league. and in two years will probably enter a compition coupe in the GT-C class.
04 Turbo Spec
11-16-2006, 10:49 PM
Budriss Motorsports Is 04 Turbo spec, Me BMS, and somtimes 96s14, we built his car. oh ya drew when r u getting the diff, so we can put it in?(Also put in Troll's Trans.) In the near furture Budriss Motorsports will be a full blown company hopefully, we are already succesful in the performance Racing League in GT-1, now next year we will enter the Srt-4 in the Neon Racing league. and in two years will probably enter a compition coupe in the GT-C class.
well thats what im goin to shcool to be a mechanical engineer, so i can design and build parts and one day take this world wide
htheduck
11-17-2006, 12:10 AM
Greg, I thought you were purchasing a pre-built racecar?
Looks like you got a ways to go for some race prep work.
-(there appears to be aftermarket calipers in the pics, but I can't tell)
Good luck with the new ride.
04 Turbo Spec
11-17-2006, 12:15 AM
Greg, I thought you were purchasing a pre-built racecar?
Looks like you got a ways to go for some race prep work.
-(there appears to be aftermarket calipers in the pics, but I can't tell)
Good luck with the new ride.
yea the car has a 6 point cage w/ door bars and fire supression in it already, and we have to put in fuel cell.
and yes the car has stop-tech big brake kit on it already.
we need to strip it and put a harness bar in at the correct height.
Wiisass
11-17-2006, 02:17 AM
we need to strip it and put a harness bar in at the correct height.
I noticed that, who does something like that? I didn't see a-pillar bars, does it have them and I can't see them or do you not need them or are they going in later?
I stopped paying attention to the other thread, but have you come up with any plans for suspension on it? And does it have struts in the front? Or shocks all around?
Let me know if you want help with anything.
htheduck
11-17-2006, 03:55 AM
yea the car has a 6 point cage w/ door bars and fire supression in it already, and we have to put in fuel cell.
and yes the car has stop-tech big brake kit on it already.
we need to strip it and put a harness bar in at the correct height.
my bad, i just noticed the 6 point cage.
the stoptech st40's I WANT SO BAD!!! (I just checked their website and there is a st45 caliper that I need to do some research on)
i thought it was gutted already. anyways, GL. :thumbup:
so, are the motons within budget?
Gorilla Unit 33
11-17-2006, 04:42 AM
congrats on the new race car project guys. im sure this one will be a fun build. now with the race limit restrictions are there any rules that limit Hp or aftermarket engine mods? of course you dont wanna go to big because you wanna be able to keep the car on the track, but i was j/w.
anyway good luck :thumbup:
Focusst13
11-17-2006, 05:20 AM
thats gonna be sick when your done with it. def gonna have to see this when it arrives.
04BlueSRT4
11-17-2006, 07:35 AM
Thats a damn nice car, good luck with her:thumbup:
96s14
11-17-2006, 07:56 AM
Budriss Motorsports Is 04 Turbo spec, Me BMS, and somtimes 96s14, we built his car. oh ya drew when r u getting the diff, so we can put it in?(Also put in Troll's Trans.) In the near furture Budriss Motorsports will be a full blown company hopefully, we are already succesful in the performance Racing League in GT-1, now next year we will enter the Srt-4 in the Neon Racing league. and in two years will probably enter a compition coupe in the GT-C class.
The diff is coming soon. I might just do it at my house because the garage is gonna be insane in the membrane busy.
04 Turbo Spec
11-17-2006, 09:10 AM
I noticed that, who does something like that? I didn't see a-pillar bars, does it have them and I can't see them or do you not need them or are they going in later?
I stopped paying attention to the other thread, but have you come up with any plans for suspension on it? And does it have struts in the front? Or shocks all around?
Let me know if you want help with anything.
The car has a full 6-point cage in it but for some reason those pics hide it very well, so yes there are A-pillar bars.
And the car has some sort of KW suspension on it. We are going to buy a competition suspension on asap.
And we are posibly gonna have it re valved so yes we might need ur help
congrats on the new race car project guys. im sure this one will be a fun build. now with the race limit restrictions are there any rules that limit Hp or aftermarket engine mods? of course you dont wanna go to big because you wanna be able to keep the car on the track, but i was j/w.
anyway good luck :thumbup:
we r gonna have the stage 3 w/ toys, there are no rules on how much power you can have.
Greg, I thought you were purchasing a pre-built racecar?
Looks like you got a ways to go for some race prep work.
-(there appears to be aftermarket calipers in the pics, but I can't tell)
Good luck with the new ride.
we know some tricks and ideas that we gathered from our racing hirtory, when completed it is gonna be a bamf
04 Turbo Spec
11-17-2006, 09:37 AM
my bad, i just noticed the 6 point cage.
the stoptech st40's I WANT SO BAD!!! (I just checked their website and there is a st45 caliper that I need to do some research on)
i thought it was gutted already. anyways, GL. :thumbup:
so, are the motons within budget?
Motons are a little out of the budget since the car has KW caster, camber plates, and I have talked with the racing department at KW I think were gonna go with their competition suspension.
oh and yea the stop-tech are a nice touch:banana:
Evo8kid
11-17-2006, 09:39 AM
i just realized im a post whore woot
thats cause you posted 3 times in a row
04 Turbo Spec
11-17-2006, 09:45 AM
congrats on the new race car project guys. im sure this one will be a fun build. now with the race limit restrictions are there any rules that limit Hp or aftermarket engine mods? of course you dont wanna go to big because you wanna be able to keep the car on the track, but i was j/w.
anyway good luck :thumbup:
No we are not limited to hp, but every one in the class runs mopar stage II except for one guy who's got stage III.
Most people keep it even so that competition is close
04 Turbo Spec
11-17-2006, 10:00 AM
thats cause you posted 3 times in a row
yea so i gotta answer peoples questions :bump:
The car will be a Raod racing BAMF,
htheduck
11-17-2006, 11:46 AM
yea so i gotta answer peoples questions :bump:
Use the multi quote function button.
04 Turbo Spec
11-17-2006, 11:56 AM
Use the multi quote function button.
I would but I'm on my side kick and the multi-qoute function doesn't work on it
Car come t-morrow late afternoon, i will video her arrival and post it up, and also will start a member journal on the car if anyone want to see the progress.
124spy
11-17-2006, 05:10 PM
nice car, but have a question about how the harness is mounted on the drivers seat. is that how the harness is going to get attached?
for proper install it needs to be between 90 and 45 dregre's for proper mounting or wrapped aroung a harness bar right behind the opening.
don't mean to be an a** but don't want any body getting hurt because the harness is not installed correctly.
nice car, but have a question about how the harness is mounted on the drivers seat. is that how the harness is going to get attached?
for proper install it needs to be between 90 and 45 dregre's for proper mounting or wrapped aroung a harness bar right behind the opening.
don't mean to be an a** but don't want any body getting hurt because the harness is not installed correctly.
oh ya we know the person who owned the car before was a complete idiot, if you look a few post back we talk about that
124spy
11-17-2006, 06:22 PM
oh ya we know the person who owned the car before was a complete idiot, if you look a few post back we talk about that
cheers..... sorry didn't see it
Wiisass
11-17-2006, 08:32 PM
nice car, but have a question about how the harness is mounted on the drivers seat. is that how the harness is going to get attached?
for proper install it needs to be between 90 and 45 dregre's for proper mounting or wrapped aroung a harness bar right behind the opening.
don't mean to be an a** but don't want any body getting hurt because the harness is not installed correctly.
90 and 45 from what? It should be within a 30 degree angle from the plane of the drivers shoulders. So if you draw a line along the side of the car at the height of the driver's shoulders and the holes in the seat, it should be less than 30 degrees below that line. I think it's 30, it's something around that.
Greg, what are the possibilities of revalving what's on the car? Or do you have to go with a different setup?
we are probably gonna put on KW compition suspenion, (there is just the mopar stage 2 suspension on it right now) or get them revavled with Konis and get eibachs springs.
04 Turbo Spec
11-18-2006, 03:10 AM
90 and 45 from what? It should be within a 30 degree angle from the plane of the drivers shoulders. So if you draw a line along the side of the car at the height of the driver's shoulders and the holes in the seat, it should be less than 30 degrees below that line. I think it's 30, it's something around that.
Greg, what are the possibilities of revalving what's on the car? Or do you have to go with a different setup?
suspension modification are open. So to answer your question, no we dont HAVE to go to a different setup. we are trying to figure out which is the most cost effective/best performing setup.
Can you revalve the suspension?
todays the day, late afternoon, that if the truck driver doesn't hit any traffic then it comes early in the morning
Wiisass
11-18-2006, 01:38 PM
suspension modification are open. So to answer your question, no we dont HAVE to go to a different setup. we are trying to figure out which is the most cost effective/best performing setup.
Can you revalve the suspension?
I'll have to look at them to know for sure. But if they're rebuildable then I can revalve them. We just might have to search for shims somewhere, but that's not a big deal. If that are sealed then it might make things harder, but we could probably come up with something.
04 Turbo Spec
11-18-2006, 04:56 PM
I'll have to look at them to know for sure. But if they're rebuildable then I can revalve them. We just might have to search for shims somewhere, but that's not a big deal. If that are sealed then it might make things harder, but we could probably come up with something.
im sure we can work something out.
peteyturbo
11-19-2006, 02:49 AM
So you guys are awaiting delivery for a car that you guys built?? I don't get it..
02rex
11-19-2006, 12:44 PM
damn bro thats sick, goodluck with everything
EvlEgl
11-19-2006, 01:31 PM
They bought it. with a few mods done...there gonna add some things and tweak it and make it there own
Try and keep up sparky :)
^ta thats wat we are doing, it got here at 9:00 today
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.