PDA

View Full Version : need help with timing


outlawzxblizz99
11-08-2006, 08:59 AM
Anyone want to help/do my valve and ignition timing? I've never done it before so I want someone that knows what they're doing so I can learn from them instead of taking the chance of f'ing it up myself.

outlawzxblizz99
11-08-2006, 11:19 AM
oh yea, im willing to pay

blackvr4
11-08-2006, 02:10 PM
what car is it? if ur doing valve timing im guessing the timing belt is facked?

outlawzxblizz99
11-08-2006, 04:52 PM
what car is it? if ur doing valve timing im guessing the timing belt is facked?

it's a 91 talon tsi, i already put on a timing belt but totally forgot to align all the stuff up so it's gonna have to come out.

blackvr4
11-08-2006, 10:26 PM
what together right now? timing cover is on? or no? do u have balance shafts on the car? also where do you live? ive done the timing belt like 20times on my GFs 1G talon. cause i had to take the motor apart like 3times. once to rebuild motor, fix a leak in the oil pump, another time to delete balance shafts. and ive done the ignition timing on her car a few times too. that parts pretty easy. are u just doing preventative maintance with the timing belt replacement, or did the timing belt already skip teeth? or snap.

outlawzxblizz99
11-09-2006, 05:48 AM
lower timing cover is still on. i still do have the balance shafts on it, i do have the bs belt elim. kit though. im located at mcguire afb, nj.

blackvr4
11-09-2006, 05:56 PM
balance shafts are a bitch to take out. and worst part is when the oil pump springs a leak 500miles later :(

outlawzxblizz99
11-14-2006, 06:52 PM
I got the timing all done...went to crank it....*CLICK*...that was it!

flashgordon
11-14-2006, 07:23 PM
It sounds like you have issues inside the motor. Did the old belt break or jump time? If it did, or you cranked the motor with the cam timing off then there is a very good chance that there are bent valves. Try turning the motor over by hand and if it's locked up you have bigger problems and should find a shop to have them take a look at the motor before any further damage occurs.

outlawzxblizz99
11-14-2006, 08:48 PM
the old belt never broke or jump time and i made sure i lined up my pulleys and cams correctly per Haynes manual. could it be just the starter or maybe a bad ground or dead battery?

outlawzxblizz99
11-14-2006, 08:48 PM
everytime i try to start it, it just makes that clicking sound. i even tried to jump it.

gsrboi80
11-14-2006, 09:03 PM
Could just be a bad ground, or you could have fried the starter relay. Get your volt meter out and measure the battery voltage

SpendOne
11-15-2006, 12:37 AM
Where are you at?? Ill help you with your timing for a couple bucks.

outlawzxblizz99
11-15-2006, 10:41 AM
Where are you at?? Ill help you with your timing for a couple bucks.

McGuire AFB, NJ

outlawzxblizz99
11-15-2006, 05:39 PM
OK, I just ordered a new grounding kit and starter....along with a few other goodies that has nothing to do with the problem, just thought I would them...anyways, why would the starter just out of nowhere go bad? could they go bad from just laying on the ground for awhile?

RyanG
11-15-2006, 09:49 PM
dead battery. try a jump :)

outlawzxblizz99
11-16-2006, 03:55 AM
dead battery. try a jump :)


already tried that multiple times

awdlaserbeam
11-16-2006, 09:50 PM
are you getting spark/fuel/air?

outlawzxblizz99
11-16-2006, 10:32 PM
are you getting spark/fuel/air?

all i hear is the starter clicking

95gstnj
12-18-2006, 08:23 PM
hey, i know you said youve tried jumps multiple times, however ive had the same problem on a 1g before. i tried a jump, and it didnt work. i threw a new battery(well, a known good battery) in it, and it fired right up. give a new battery a try

allspoolin4
01-11-2007, 11:13 PM
soo???
did u get it fixed? what was the problem, i got all interested in the story and and at the end it was like i got an erection and fell down.

outlawzxblizz99
01-12-2007, 09:48 AM
soo???
did u get it fixed? what was the problem, i got all interested in the story and and at the end it was like i got an erection and fell down.

haha...sorry about the tease. basically the short version is that i got the timing all done and i had to leave it there for the lack of funding of fluids. when i came back i didnt check the timing because i didnt think someone would mess with it. I WAS WRONG. someone messed up my timing which caused my valves to bend, smashed out my turn signals and half ripped off my front bumper.

allspoolin4
01-17-2007, 11:27 PM
:furious: ahh jesus that sucks dude, people are assholes out there, g/l for ya brudda

KawBoy
01-24-2007, 06:18 AM
haha...sorry about the tease. basically the short version is that i got the timing all done and i had to leave it there for the lack of funding of fluids. when i came back i didnt check the timing because i didnt think someone would mess with it. I WAS WRONG. someone messed up my timing which caused my valves to bend, smashed out my turn signals and half ripped off my front bumper.

I thought you said nobody would **** with your car?:lol:

On Sale
01-24-2007, 07:05 AM
someone on the air base ****ed with your car? thats mad gay. or do u live in the town around the base?

outlawzxblizz99
01-24-2007, 04:20 PM
I thought you said nobody would **** with your car?:lol:

it was off base when someone ***** with it. :-p