honda eg hatch springs on dc2 integra?

[streetAssasin96]

i heard somewhere that eg hatch springs and suspension are the same set up as the dc2 integra. i was thinking about buying springs just for now, and my friend has tenzor purples for real cheap. if anyone has info on this, please help me out. thanks

[Loserkidwac]

Yes i believe the suspension is the same...easiest thing to do is look on the tezno site and see if the part numbers are the same, more than likely they will be fine

[streetAssasin96]

thanks man

[Loserkidwac]

Yes i believe the suspension is the same...easiest thing to do is look on the tezno site and see if the part numbers are the same, more than likely they will be fine

[Honduh]

If you plan on using the shocks too then you will have to use the front wishbones from a EG to use them on your dc2.

[CivSi06]

i couldnt find a part number for the 94-01 integras.. am i missing something? im helping him put them on later and i dont wanna get everything apart just to find out they wont fit..

[streetAssasin96]

so we went to put the springs on and were having so many problems. i started on the back strut and couldn't get the bolt that connects the strut to the rear control arm, and i didn't have a break bar which didn't help at all. plus, the impact wrench i was using blew. as for the front, we didn't even bother taking anything apart because its seems you have to totally disassemble the entire front suspension. the yoke on the bottom of the strut looks like it will get stuck on the axel, and you won't be able to lift the strut out. i don't know it looks like a huge pain in the a**, which won't stop me , but if anyone has suggestions that would be great. thanks

[2000MRDC2]

the bolt on the rear lower control arm is 95% sure to break it happens on pretty much any integra which is why most ppl upgrade the LCA's when they do suspension

[streetAssasin96]

thanks for the advice

[TurboTagTeam]

If you use a breaker bar for the rear LCA make sure you soak the bolts with PB blaster for at least an hour before you try to take them off. THey will break if you dont.

The front suspension is easier than it looks. I changed both my front shocks last week and it only took me an hour with simple hand tools. The front suspension is easier than it looks. Just pull of the upper A arm and the whole process it alot eaiser.

BTW---Allmost every part is interchangable between DC2 integra's and EG civic's.

[streetAssasin96]

thanks man

[CivSi06]

eeewwww, sweet. lets do this so we can rub it in your dads face mikey

[streetAssasin96]

thats what im sayin. i was just thinking about waiting and buying the tein full coilovers for it, and maybe like some skunk2 lower control arms. i don't know, maybe for now the springs will do. haha... lets f****** rage