Dave's 92 NSX

[Dave]

Ive been wanting a mid engined exotic for a few years now, and since i was being sent back to iraq so soon after the first tour, I felt the time was right to make that dream a reality. at first I was looking hard at the lotus esprit. I knew all about its electrical problems and continued my research unfased until i found out about the renault tranny that blows anywhere over 350 hp. the lotus out i continued looking, the italians were fragile and germans had ****ty dynamics being as they arent true mids. in either case, they were both so expensive that the only cars fitting my 30k budget left the factory in the late 70's. this was unacceptable and i was about ready to give up the hunt when a best motoring video brought Honda's NSX back into my attention. Id known about the NSX since its inception in the early 90's: it was a beautiful car and the magazines loved it, but like many i had been unwowed by its lack of power. what i saw on that video was BMI's own "Gan san" racing against contemporary exotics in a NA2 NSX-R at twin ring motegi. seeing that 290 hp car hold off a 600 hp murcialago using only its lightwieght and perfect balance was inspiring, I had to have one. I quickly joined www.nsxprime.com and downloaded a copy of the FSM, all my research coming back positive I began my search for a red/black NA1 with tan leather interior and shortly found one at a decent price in prime's classifieds. Now i just gotta get free of Iraq so i can enjoy it properly.

Now then, after that long winded introduction heres some pics ;)
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0248.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0249.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0247-1.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0246.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0250.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0251.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0252.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0253.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0254.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0255.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0256.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0258.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0259.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0261.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0262.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0275.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0331.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0330.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0329.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0327.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0343.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0351.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN0354.jpg

[OptiCon]

Needs more black PRO-N1... otherwise, yummy.

[Dave]

And now a short peice on mods that i have aquired
Im trying to wait untill i return home to buy parts but that hasnt stopped me from purchasing a few small items

#1 Cantrell concepts CF splitter
http://www.scienceofspeed.com/products/exterior%5Fperformance%5Fproducts/NSX/Cantrell%5FConcepts/carbon%5Fracing%5Fsplitter/splitter_450.jpg
#2 Science of speed "stealth" liscense plate frame
http://www.scienceofspeed.com/products/exterior_performance_products/NSX/ScienceofSpeed/Stealth_License_Plate/animation3.gif
#3 Procar specials CF headlight buckets
http://www.nsxprime.com/photopost/data/821/4656procarfront-med.JPG

Ive also picked up a Mugen shift knob which i intend to couple with a short shifter
http://www.kingmotorsports.com/images/PRODUCT/large/224.jpg
I'll throw more pics up as i buy parts or as they go on. im waiting patiently for splitter pics as of this moment. later

[JDM87]

i love the nsx's i want to get one after im done with my car. Congrats on owning such a hot car.

[Evo8kid]

I :inlove: NSX's...'nuff said

[Dave]

OH N0ES! I found me a set of NA1 NSX-R enkei's at a nice price on ebay. my heart is still set on black ssr type c/rs but these will give me a nice set of rare lightweight rims for the interim.

http://images.auctionworks.com/hi/65/65032/dsc05421.jpg

[TalonTsi97]

I like those wheels, The ssr's you want will look good but if you can get those enkeis for rite price i say go for it.

[Dave]

Splitter pics! and my dad already cracked it DOH!! :)

http://i23.photobucket.com/albums/b369/Khajjathefang/IMG_0848.jpg

http://i23.photobucket.com/albums/b369/Khajjathefang/IMG_0849.jpg

http://i19.photobucket.com/albums/b189/khajjathefang2/IMG_0851.jpg

http://i23.photobucket.com/albums/b369/Khajjathefang/IMG_0854.jpg

http://i19.photobucket.com/albums/b189/khajjathefang2/IMG_0855.jpg

[Silverfc88]

Oh noes!! I bet your dad feels like an ass! LoL.. That's super cool to let your dad cruise around in that though. What does he normally drive?


Oh and I really like the wheels you got. If anything you can always powder coat those.

[TalonTsi97]

I really like the lip, but knwo you need more carbon and dark wheels. Sucks it already got cracked, i would be so pissed.

[Dave]

Oh noes!! I bet your dad feels like an ass! LoL.. That's super cool to let your dad cruise around in that though. What does he normally drive?


Oh and I really like the wheels you got. If anything you can always powder coat those.

yeah a little, he immediately offered to buy me a new one. he normally pimps a gmc safari van

if these things turn out to be genuine nsx-r wheels (which is damn well what it looks like) i may be able to turn em around for quite a bit more than i spent on them. so no powdercoating ;)

[Dave]

I really like the lip, but knwo you need more carbon and dark wheels. Sucks it already got cracked, i would be so pissed.

more carbon is coming, dont worry ;)

[james_ls]

Killer car.

I really really really think they are R wheels.

LUCKKKYY!!!

[2slowMX5]

Nice car, good luck with it. I LOVE the nsx and hope to own one one day. Its probably right at the limit of what ill actually be able to afford in the near future. We have similar criteria, and the nsx seems to fit the bill.

"I quickly joined www.nsxprime.com and downloaded a copy of the FSM"

whats fsm?

[Silverfc88]

Factory service manual

[2slowMX5]

o i c kthnxbye

[zerioustt]

Your car is sexxxy.

Lmao at how little it looks next to bobs truck!

[PA Z06]

Car looks sick, love the CF splitter, I have always found those cars to be the most exotic looking still to this day.

[IntegrasAreBest]

beautiful car i want one!

[dt98gsr]

Gorgeous car man, looks like a lot of fun!

[E.M.S.]

lookin good...

[Crzyguy972]

holy **** you keep your car clean.

[9 Ball]

http://i19.photobucket.com/albums/b189/khajjathefang2/IMG_0855.jpg

I can already tell this thing is going to sharp when you get finished with the rest of the mods. The front lip totally changes the look.

I vote for a rear diffuser next.:thumbup:

[Dave]

I can already tell this thing is going to sharp when you get finished with the rest of the mods. The front lip totally changes the look.

I vote for a rear diffuser next.:thumbup:

already on the list, i'll be going with a taitec diffuser thats based on the jgtc model which was so effective it was banned from competition. also lets me mount a spiffy center exit exhaust ;)

[69 Mach 1]

nice i love NSX's
post pics with the new wheels they look hot

[05Accent]

damn that lip is hot at ****!!! nice car..

[drew]

that lip really sets off the front end, I'm lovin' it

[merical]

Car looks great man,

Be careful if you end up lowering it. I lowered my '92 and am constantly scraping, lol. We'll have to get some of the local NSX's together when you get back!

Matt

[ozthunder]

My hero developed the handling in that..oi..I'd LOVE one of those.

[Dave]

My hero developed the handling in that..oi..I'd LOVE one of those.

aryton senna? or alex zanardi? keiichi tsuchiya has owned several as well as raced them in lemans and jgtc and i think gan san might own one as well...

[ozthunder]

Senna.

[chummmma]

oh boy, dave the car was badass to ride in when u drove it back :) can't wait till yah get your ass back here though.

[chummmma]

oh boy, dave the car was badass to ride in when u drove it back :) can't wait till yah get your ass back here though.

[Dave]

Car looks great man,

Be careful if you end up lowering it. I lowered my '92 and am constantly scraping, lol. We'll have to get some of the local NSX's together when you get back!

Matt

def have to do that, what suspension did you go with?



chumma, next ride is with I/H/E ;)

[Dave]

http://i19.photobucket.com/albums/b189/khajjathefang2/DSCN0497.jpg

http://i19.photobucket.com/albums/b189/khajjathefang2/DSCN0501-1.jpg

http://i19.photobucket.com/albums/b189/khajjathefang2/DSCN0498.jpg

http://i19.photobucket.com/albums/b189/khajjathefang2/DSCN0502.jpg

[Dave]

mmmm new nsx-r centercaps
http://i19.photobucket.com/albums/b189/khajjathefang2/Tires/DSCN0503.jpg?t=1167600211

[projexxx]

eeeehhhhhhh 15/16 stagger? FTL!

if youre gonna roll with the big boys its time to man up to some real wheels!

btw my buddy used to own a silver 91(92?). its a total dude magnet. all i have to say is Peter... watch out for your cornhole, bud.

shortly before he sold it:
http://i54.photobucket.com/albums/g97/projexxx/DSCI0012-1.jpg

[Dave]

eeeehhhhhhh 15/16 stagger? FTL!

if youre gonna roll with the big boys its time to man up to some real wheels!

btw my buddy used to own a silver 91(92?). its a total dude magnet. all i have to say is Peter... watch out for your cornhole, bud.

shortly before he sold it:
http://i54.photobucket.com/albums/g97/projexxx/DSCI0012-1.jpg

manual rack with big wheels ftl! i dont want to die if i have to countersteer ;)

[philly_s14]

beautiful nsx. i really like the lip.

[Dave]

God I love gran turismo, not quite as good as actual pictures but it still gives an idea


http://i23.photobucket.com/albums/b369/Khajjathefang/IMG0004-1.jpg

http://i23.photobucket.com/albums/b369/Khajjathefang/IMG0003-1.jpg

http://i23.photobucket.com/albums/b369/Khajjathefang/IMG0002-1.jpg

http://i23.photobucket.com/albums/b369/Khajjathefang/IMG0001-3.jpg

http://i23.photobucket.com/albums/b369/Khajjathefang/IMG0000-3.jpg

[Dave]

hey did it just get louder in here? :P
http://www.scienceofspeed.com/products/exhaust_airflow_products/NSX/TAITEC/exhaust_headers/TAITECexhaust.jpg
dont ask how much, lets just say a lot and leave it there

[Spocknasty]

Wow, that exhaust is a piece of art. Definitely throw up some sound clips when it gets installed!

[Honest_Bob]

Deffinitly going to need some sound clips! :wink:

[streetAssasin96]

nice whip man. love the paint haha. we should take pics in the spring

[Dave]

well guys, i refuse to have any performance parts installed untill ive had a chance to dyno/drag it for my baseline, however i'll grab some clips off of prime tonight and post em up so you dont have to wait until august ;)

[Dave]

ok heres one with cats/silencers
http://s29.photobucket.com/albums/c259/Angelo88/NSX%20vids/

test pipes
http://www.nsxprime.com/photopost/showphoto.php?photo=15247

test pipes on the dyno
http://ojas.net/nsx/NSteXpo2005/Media/07%20DPG%20(134_3491).avi

test pipes revving
http://www.youtube.com/watch?v=-duGbGWt0wg&eurl=http%3A%2F%2Fwww%2Ensxprime%2Ecom%2Fforums%2F showthread%2Ephp%3Ft%3D62406%26page%3D4%26highligh t%3Dtaitec%2Bjgtc

cats
http://www.youtube.com/watch?v=L0KmSTL_QDk&eurl=http%3A%2F%2Fwww%2Ensxprime%2Ecom%2Fforums%2F showthread%2Ephp%3Ft%3D62406%26page%3D4%26highligh t%3Dtaitec%2Bjgtc

[streetAssasin96]

thing sounds raw with no cat.

[PaleDSM]

Damn, you aren't wasting any time...or money on that baby.

[james_ls]

Thing is going to be sick dude.

You still chargin 5 bucks a head??

[Dave]

lmao, sure

[MPowerKai]

that is one hella expensive exhaust

[Dave]

of course ray would go look it up ;) im sure you noticed that this is the center exit version and requires another peice as well? ;)

[MPowerKai]

of course ray would go look it up ;) im sure you noticed that this is the center exit version and requires another peice as well? ;)

No, I didn't have to look it up. I am a part of NSXPrime too remember :-p

[Dave]

yup, hey at least its not as pricey (OR COMPLEX) as that gt-rom stuff ;)

[IntegrasAreBest]

thats going to sound badASS.

[Dave]

O-kay after me calling science of speed and them calling taitec (iraq->arizona->japan) I was informed that taitec no longer produces the JGTC style exhaust OR my second choice, the GT lightweight center exit. SO after conferring with chris from sos Im now getting Cantrell concepts headers and their knockoff of the regular exit gtlw exhaust system. apparently cantrell's parts offer better power, better quality/fitment, and are less expensive. also ordered a scoop that replaces the stock intake silencer for a ram air effect which comes paired with a nice drop in filter. other items purchased included the taitec diffuser and an okuyama carbing rear strut brace. supposedly everything should be in in a few weeks. fun fun fun

[Dave]

buddy club racing dampers, fresh off the boat
http://i23.photobucket.com/albums/b369/Khajjathefang/Photos%20from%20home/Picture197.jpg

http://i23.photobucket.com/albums/b369/Khajjathefang/Photos%20from%20home/Picture196.jpg

http://i23.photobucket.com/albums/b369/Khajjathefang/Photos%20from%20home/Picture195.jpg

snowy

http://i23.photobucket.com/albums/b369/Khajjathefang/Photos%20from%20home/Picture206.jpg

[Dave]

And heres what she'll look like from the back with the diffuser and the regular width gtlw

http://i23.photobucket.com/albums/b369/Khajjathefang/Photos%20from%20home/DSC00410.jpg

[moosethebelgian]

Its gonna be awesome :)

[Buster]

must be awesome man.

[Dave]

stuff is in and inventoried as of ten minutes ago. unfortunately, sos wrapped everything up like it was going to some pharaoh's nsx in the afterlife so no pictures till install time. headers is supposed to be about a 8-10 hour job by itself so im considering doing a time lapse movie of the event.

[Snoozie]

Yay new parts! lol

[dickerdieter]

dude this is gonna be sweet! more!! moreeee!!!!

[Dave]

yeah, i'm dying to get home and get this moving. I still need to find some UHP rubber for the type-r wheels and ive been shopping ebay and yahoo! japan for a double din JDM alpine head unit. yes im crazy, no i dont care haha

[Dave]

Looks like we have another mod for the nsx ;) a driver. allow six to eight weeks for delivery

[Snoozie]

oh noes! Daves coming home soon??

[Dave]

Ive said all i can say :P

[Dave]

AAAAAANNNND my dad swapped the blown fuses and ressurrected the nsx last night! hmmm it was alive and then it was dead and now its ....UNDEAD?

http://i23.photobucket.com/albums/b369/Khajjathefang/zombsx.jpg

Who needs premium? we run on BRAINS

[Dave]

mmmm yummy
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN1010.jpg

[Dave]

ooooh
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN1011.jpg

now comes the HARD part

[Blkmax]

ooooh
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN1011.jpg

now comes the HARD part

NICE!! what kind is it, and when are you installing??

[Dave]

its a cantrell concepts, taitec gt lightweight knockoff. a little heavier than the genuine jdm article, but with better materials, quality and fitment. as for when im kinda working on it now, headers are next and im gonna have to pull some structural members to get er done

[Dave]

headers
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN1012.jpg
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN1013.jpg

and i put the intake in too quick for any pictures of it but its louder than most peoples exhausts ;)

[Silverfc88]

Looks good. I don't think I've ever heard a NSX with a full exhaust before. Can't wait to see yours.

[STI_wagon]

Big Dave,
I can't see your pics since I'm at work(blocked photobucket) but I'm sure it looks sweet. The big subie meet down here had 2 nsx's..

[Dave]

ok the rear header is in, and im about halfway done pulling structural members out so i can mount the front one. i'm classifying nsx headers as a jesus level job gotta go to sears for mo' tools.

[xEJ20x]

I'm more than willin to give ya a hand with the next parts upgrade, just gotta be sure I have that day off.

[Silverfc88]

In the process of install pics?

[Nors]

Sounds like fun. Looks cool as well, I am waiting for the video :)

[Dave]

In the process of install pics?

nah, my camera is ghey and im way too filthy. i do have one comparing the craptastic manifold to the header though

[Dave]

mcdonalds break! got that brace out which was a major bitch. now i just gotta swap manifolds and start bolting it all back together :eek:

[zerioustt]

mcdonalds break! got that brace out which was a major bitch. now i just gotta swap manifolds and start bolting it all back together :eek:


ok leave that sheet for later and get your ass to chumbuckets.

[Dave]

ok leave that sheet for later and get your ass to chumbuckets.

i want to, but i want this done too and ive still got like 6+ hours worth of work left :eek:

[zerioustt]

i want to, but i want this done too and ive still got like 6+ hours worth of work left :eek:

duuuude what would posses you to mess up your holiday! now finish up what your doing and bring your ass over.

ps this is funny were bitching back and forth between 2 threads...lol

[Dave]

duuuude what would posses you to mess up your holiday! now finish up what your doing and bring your ass over.

ps this is funny were bitching back and forth between 2 threads...lol

duuuude im on leave for a month, its all holiday lol

[Dave]

ok endstate for today was both headers installed, o2's mounted and wired and every brace and bolt replaced and properly torqued, all in all i think i spent about 12 hours today and i had done a lot yesterday :eek: anyway, all thats left is to punch the old cats (or wait for my new hi-flows) hang the exhaust and connect everything. after today it should be easy ;)

a few more pics for you guys, i was far more interested in doing the work than documenting it bt you can kinda get the idea.

here you can see a brace and the structural support/engine mount i had to pull to reach the front header
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN1016.jpg

assorted old exhaust crap
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN1015.jpg

and here we compare the new headers to the stock manifolds...wonder which one flows better? ;)
http://i23.photobucket.com/albums/b369/Khajjathefang/DSCN1014.jpg

[turbo4g63]

well that should flow a "tad" bit better....is that piping stainless?

[Dave]

well that should flow a "tad" bit better....is that piping stainless?

yerp! t-304. this exhaust combo has been making gains of 30-40 hp on early cars like mine, probably more in my case since that cat was clogged

[xEJ20x]

So when shall I see this NSX? I've seen the Daytona and 240Z twice.

[Honest_Bob]

Sweet! Sounds like a real job.:eek:

[S.Milone]

BTW WE have a supercharged nsx with the same headers, cat delete pipes and the same exhaust(the Real JDM one) Idk the diff in them but it sounds amazing. Like a JGTC car. You will love every second of it.

[Dave]

BTW WE have a supercharged nsx with the same headers, cat delete pipes and the same exhaust(the Real JDM one) Idk the diff in them but it sounds amazing. Like a JGTC car. You will love every second of it.

JGTC car or a sportbike! its LOUD lol. the diff is better build materials the american one is a little heavier because of this. oh yeah, one of my injectors is stuck and dumping so we'll be stopped at a light and like 5 minutes later POW! lol its amusing. I think im getting fireballs too

[zerioustt]

JGTC car or a sportbike! its LOUD lol. the diff is better build materials the american one is a little heavier because of this. oh yeah, one of my injectors is stuck and dumping so we'll be stopped at a light and like 5 minutes later POW! lol its amusing. I think im getting fireballs too

hahaha....i cant wait to hear this thing.

[Dave]

hahaha....i cant wait to hear this thing.

you're just happy your car isint the only one with fire up its butt

[merical]

Glad to see the parts going on! I actually just ordered the same headers and exhaust so im interested in hearing your feedback on the system. I ended up going with the high-flow cats though, don't want to piss off the wife too much when she's riding with me, lol.

regards,

Matt

[Raven18940]

Dude, your car sounded ridiculous. :)

[foss]

Looked like a fun install :).

[Buster]

Glad i finally got to see it. Keep it up, i think its one of the most interesting cars on TST

[Dave]

Glad to see the parts going on! I actually just ordered the same headers and exhaust so im interested in hearing your feedback on the system. I ended up going with the high-flow cats though, don't want to piss off the wife too much when she's riding with me, lol.

regards,

Matt

i also went with high flows but chris didnt have them in stock and my stock cats were trashed sooo... anyway i love how it sounds at high and mid rpms and cruising you can still have a convo. at low rpms it sounds like the bastard child of a harley and a wrx. Im 90% sure this is because the exhaust path isint very long and im essentially running open pipes, we'll see how things sound with the random cats. also the build quality on this system is very good but the clearances are tight as hell! i had to re-drop the exhaust and fiddle the crap out of the hangars to get the cats in. anyway me and amfracing are going to try and put together a video soon for folks who havent seen it/heard it.

oh and matt, if you didnt order the AIS/UNI combo, grab em! it adds so much to the engines song, i found the ais alone was louder than some exhausts :P

[AMF Racing]

sounds good, def was amusing riding yesterday and just random ass pops at red lights. race cars FTW!!!

[merical]

i also went with high flows but chris didnt have them in stock and my stock cats were trashed sooo... anyway i love how it sounds at high and mid rpms and cruising you can still have a convo. at low rpms it sounds like the bastard child of a harley and a wrx. Im 90% sure this is because the exhaust path isint very long and im essentially running open pipes, we'll see how things sound with the random cats. also the build quality on this system is very good but the clearances are tight as hell! i had to re-drop the exhaust and fiddle the crap out of the hangars to get the cats in. anyway me and amfracing are going to try and put together a video soon for folks who havent seen it/heard it.

oh and matt, if you didnt order the AIS/UNI combo, grab em! it adds so much to the engines song, i found the ais alone was louder than some exhausts :P


Thanks for the info. I just picked up a brand new AIS on Prime for $165 shipped which rocked. I had an ARK system on the car when I first picked it up and it was definitely on the loud side. Im hoping its somewhat reasonable with the cats on.

Matt

[Honest_Bob]

Need video!

[Dave]

we just shot one today between the nsx and amfracing dave's rsx so its coming. just relax ;)

[Dave]

right click and save as

http://crazy2sin.com/storage/video/daveanddave.wmv

[Calvinball]

Way to buzz King's Croft!

And c'mon, that onramp to 38 by the Acura dealership...you can take that much quicker!:wink:

sounds good man!

[redline]

Sounds great!

[AMF Racing]

sounds good, i got ripped off though, lol :(

[james_ls]

Dave the NSX sounds SICK!!

Welcome back.

[Dave]

annnd today i threw on the buddy club racing spec coilovers. these bad boys are rated at 10K front and 12K rear and offer 15 levels of adjustment. EXTRA SCARY with my crap tires I think its going to take a while to learn the car again. also i just ordered some nice little jdm goodies to hold me over until spring

[Dave]

id forgotten about the special kind of fear that comes from driving triple digit speeds on unlit two lane country roads with a stiff ass racing suspension. its a good feeling lol

[AMF Racing]

pics or ban.....

[Dave]

pics or ban.....

maybe after the route ks stuff shows up

[S.Milone]

Did you have your alignment done after the coilovers went on. That could be part of the instability at speed.

[MPowerKai]

Famous Dave, I think one of your taillights are out :)

[Dave]

Did you have your alignment done after the coilovers went on. That could be part of the instability at speed.

no instability, it actually feels very good. the issue is its a bumpy road with very strong springs and theres only so much a damper can do ;) though i am quite impressed with how well these dampers perform so far

[Dave]

Famous Dave, I think one of your taillights are out :)

um no. nsx's HAVE no lights in the middle. or did you mean that old video? thats on the old only firing on 2 cylinders ignition and before i found the wiring short that was burning out the right taillamp fuses

[MPowerKai]

um no. nsx's HAVE no lights in the middle. or did you mean that old video? thats on the old only firing on 2 cylinders ignition and before i found the wiring short that was burning out the right taillamp fuses

Oops, i didn't realize it was from 7/10 lol. That's my bad. :)

[Dave]

Oops, i didn't realize it was from 7/10 lol. That's my bad. :)

no problem buddy. some of us dont update very often