Introduction & Contact Info

[JMFabrications]

What’s up TST, I just wanted to introduce myself, and tell you a little bit about my company and what we do. My name is Jim and I own JM Fabrications. We are a welding and fabrication shop based in Hatfield, PA. We have been in business for a little over 2 years now and we specialize in motorsports welding, design, and fabrication. The typical types of jobs we do are custom turbo kits, exhaust systems, intercooler’s and piping, rollcage and chassis work, and custom race parts. We have our own product line targeting DSM’s, however we are rapidly growing and starting to branch off to many other makes and models.

Our shop is just over 5,500 sq/ft and features many tools, machinery, and equipment. Along with our welding and fabrication services we also offer some machining services. We have a 3 axis CNC mill that will do most 2-D and some 3-D parts, and a 14x40 manual lathe for various types of turning jobs. Lastly we offer basic engineering services using Autocad, Solidworks, and Mastercam.

If that’s still not enough for you, we also work closely with a larger scale fabrication company in the area that offers services such as waterjet cutting, plasma tube processing, pressbrake bending with CNC backgauge, tube bending, shearing, and machining. Let us help you will all your fabrication needs!

Here is short list of some equipment we have:
-Lincoln Precision TIG 375 Welder
-Lincoln Precision TIG 275 Welder
-Lincoln Precision TIG 175 Welder
-Lincoln Power MIG 255
-Lincoln MIG 135
-Miller Spectrum 375 Plasma Cutter
-Acer Ultima II 3 Axis CNC Machine
-Precision Matthews 14x40 Engine Lathe
-48” Blast Cabinet
-Hot Tank Parts Washer
-7”x12” Horizontal Bandsaw
-14” Vertical Bandsaw
-Pro Tools Hydraulic Tubing Bender
-52” Slip Roll
-52” Foot Shear
-48” Box and Pan Brake
-2 Bend Pak Car Lifts
-Dedicated Polishing Room w/ 1.5HP 10” Baldor Buffer
-Bead Form Tool (beads the end of IC pipes)
-and many many more……….

Some of our most recent projects have been:
’96 Mustang Turbo Kit
http://www.jmfabrications.com/images/nitro/nitro2.jpg

’05 EVO 8 Rollcage and Custom Fuel Cell w/ Firewall
http://www.jmfabrications.com/images/frank/frank5.jpg

’91 Talon Liquid to Air Intercooler Setup
http://www.jmfabrications.com/images/pete/pete2.jpg

To see these and many other projects feel free to check out our “Projects” page, http://www.jmfabrications.com/projects.html , and take some time to browse the rest of the site to see whats going on.

Below are just a few pics of our shop:
http://www.jmfabrications.com/images/shop/092006%20002.jpg
http://www.jmfabrications.com/images/shop/092006%20003.jpg
http://www.jmfabrications.com/images/shop/092006%20004.jpg
http://www.jmfabrications.com/images/shop/092006%20009.jpg
http://www.jmfabrications.com/images/shop/092006%20016.jpg

By now you should have a pretty good idea as to what we do, if you have any questions or custom projects you need help with please do not hesitate to contact us.

Contact Info:
Shop Address-

JM Fabrications
2700 Bergey Road
Building F Rear
Hatfield, PA 19440

Phone-
Office: (215) 703-3721
Fax: (215) 997-6851

Email-
General Info - info@jmfabrications.com
Order Info - sales@jmfabrications.com

Hours-
Mon-Fri 10:00am-6:00pm est.
Sat - By appointment only
Sun - CLOSED




Thanks for your time,
Jim McKeone
JM Fabrications

[KGParts]

^^^ Good guy right there!^^^

Whats up Jim?!

[TalonTsi97]

Welcome, Great people rite here, have never heard a bad thing about them and have seen a lot of there work in person on dsm's. Quality stuff

[TROLL]

i've heard the same good stuff... glad to have you as a part of the site :)

[Wiisass]

Jim does good work. He's the one that made the shock mounts for the supra.

http://www.theoryinpracticeengineering.com/gallery/d/387-1/DSC00302.JPG

a 14x40 manual lathe for various types of turning jobs.

Jim, so you picked up a lathe now as well? That should come in real handy.

Tim

[AREA1320]

welcome :) awesome equipment you guys are working with!!!

[JMFabrications]

Thanks a lot guys for all the compliments. Its a pleasure to be a sponsor of this site, its seems to be growing very fast! I look forward to doing work for you guys!



Jim, so you picked up a lathe now as well? That should come in real handy.

Tim

Hey Tim,

Yea I just picked it up last week, still kinda learning a bit...its been awhile since ive used one. I definately need to get a digital read out, this reading the dial crap sucks!

[05OCsrt-4]

welcome, 2 questons
1: can you weld cast aluminum?
2: can you make a custom 4 inch intake for me?

[JMFabrications]

welcome, 2 questons
1: can you weld cast aluminum?
2: can you make a custom 4 inch intake for me?

1. Yes we can, its very dirty even after you clean it for an hour, sand gets trapped in the metal from casting. The end result isnt always the nicest but it works.

2. Sure can assuming there is room in your car for a 4" intake, just give me a call, email, or stop by next week and I can give you a better quote once I know what exactly your looking for.

Thanks,
Jim
JM Fab

[ScubaSteve]

Damn Jim looks like youve been busy since I left. The shop looks all backwards and ****.


Im new here so my word might not mean much yet but Jims a great guy and does some amazing work. He goes way out of his way to help someone out and give them exactly what they wanted. Anything you need this guy takes good care of his customers and I guarantee you wont be dissapointed in his work. Ask any of the DSM guys on here and im sure they can tell you how much hes done for the communtity.

[JMFabrications]

Damn Jim looks like youve been busy since I left. The shop looks all backwards and ****.


Im new here so my word might not mean much yet but Jims a great guy and does some amazing work. He goes way out of his way to help someone out and give them exactly what they wanted. Anything you need this guy takes good care of his customers and I guarantee you wont be dissapointed in his work. Ask any of the DSM guys on here and im sure they can tell you how much hes done for the communtity.

Wow everyone is so nice here, your making me blush!!!! Anyway just glad I can help everyone out! For now im off to see Jackass 2!!!

Talk to you guys later!
Jim

[ScubaSteve]

Wow everyone is so nice here, your making me blush!!!! Anyway just glad I can help everyone out! For now im off to see Jackass 2!!!

Talk to you guys later!
Jim


Damn, the man i love doesnt even recognize me anymore. Read my damn name jimmy.

[JMFabrications]

Damn, the man i love doesnt even recognize me anymore. Read my damn name jimmy.

HAHA, sorry im a little slow tonight! Great to hear from ya Steve, hows the first year of school goin? Did we win the bet yet?

[ScubaSteve]

The bets still going strong. Schools been great... well I think... its hard to remember some nights.

Im going out for the night so i'll catch up with you later.

[AREA1320]

Jim, I will def be contacting you about some intake flanges and tb flanges for a WRX that I need done :)

[JMFabrications]

Jim, I will def be contacting you about some intake flanges and tb flanges for a WRX that I need done :)

Sounds good, looking forward to it!

[gray1g]

I've been a customer of Jim's for a couple of years now. Top notch work and even better he treats your car like it was his. Jim did my roll cage, repaired some welds, and made some nice parts for the DSM community!

[Honest_Bob]

Wow, looks like you guys really know what your doing. :thumbup:

[Renegade_]

I hear good stuff from steve - this is his roomate. Welcome to TST

[alwaysinboost]

JM Fabrication does some really good work... now get off the intra-web and get back to welding my parts.

[WRB04]

looks like you guys do good work and close to home, welcome

[civicboy18974]

awesome customer service, just a little hard to find the shop, signs are a must!

[1gmfanatik]

Damn, from what I have read ya'll are some good peeps. If I can ever come up with another mode of transportation and some extra loot to play with, I know who I may come to, to help expand your Custom Turbo installs.