Mandral Pipe Bender in East PA area? [Archive] - TriStateTuners.com :: Home of Tristate Auto Enthusiast
PDA

View Full Version : Mandral Pipe Bender in East PA area?

themadhatter
05-04-2005, 07:12 PM
anyone know of one? I'm looking to put together a 3" turbo back system for my bimmer in the next 3 weeks, I'll even just buy the pipes and weld it myself if needed but I gotta get the pipes first.

I'm in the bethlehem area.

any leads would be welcome!

thanks,
Ron
teh DIRT
05-04-2005, 08:07 PM
you can buy mandrel bent pipe at auto stores.
themadhatter
05-04-2005, 08:21 PM
you can buy mandrel bent pipe at auto stores.

I must be blind that or I'm hitting the wrong shops. what shops have the pipes?

I could probably get a few 3" u-bends and go hacking away but that's more of a pita then getting a bender to do everything right for you the first time.

-Ron
teh DIRT
05-04-2005, 08:43 PM
i forget what shop i was at that had mandrel pipe...it was on street road around yardley.
stichris
05-04-2005, 08:47 PM
Street Road + Yardley == does not parse

Street Road near Bensalem, perhaps?
teh DIRT
05-04-2005, 08:48 PM
langhorne i meant.
themadhatter
05-04-2005, 08:53 PM
langhorne i meant.

can you guys throw up zips on langhorne and yardley? I gotta learn more about locations in PA as I'm still new to the area.
teh DIRT
05-04-2005, 08:54 PM
thats all you chris....all i kno is NE phila= 19111
JasterM5
05-05-2005, 05:46 PM
A1 Racing in Warminster sell 30, 45, and 90 degree 3" Mandrel bends. google for their website. They are great guys and helped me out alot for my swap. the bends are about $17 a piece though. There is another store called United Auto Discount on County line road in Southampton. They have the flanges and the gaskets for the pipe and they also have 10' for like $50. These are the places where I got all of my materials.

Hope this helps.
themadhatter
05-05-2005, 06:23 PM
A1 Racing in Warminster sell 30, 45, and 90 degree 3" Mandrel bends. google for their website. They are great guys and helped me out alot for my swap. the bends are about $17 a piece though. There is another store called United Auto Discount on County line road in Southampton. They have the flanges and the gaskets for the pipe and they also have 10' for like $50. These are the places where I got all of my materials.

Hope this helps.

found'em thanks www.a1racing.com/
crtillmanspeed
05-06-2005, 02:22 PM
Custom chassis and performance... edgemoore delaware... about 20 minutes from philly...

CHEAP AND BEST WORK

www.jmchassis.com