Hyper
04-29-2005, 12:15 AM
I bought this thing off ebay for $50 shipped, http://members.aol.com/Sam16888/benzkey5.jpg
thought I may give it a try because I HATE the banging sound from the alarm module remote on the steering column....:furious: in my forester I put some soft stuff on the column, but now I need to extend my imaginagion plus always wanted the audi-like key
got it today and it happens to be much harder, if possible at all, then I expected
let the pics talk for themselves:
This is OEM remote:
http://s89754395.onlinehome.us/alarm/1.JPG
disassembled
http://s89754395.onlinehome.us/alarm/2.JPG
here's the new gadget, already opened by me
http://s89754395.onlinehome.us/alarm/3.JPG
Here's the OEM chip next to the new housing
http://s89754395.onlinehome.us/alarm/4.JPG
And here's the problem
http://s89754395.onlinehome.us/alarm/5.JPG
Obviously I would have to use circle battery, no problems here
http://s89754395.onlinehome.us/alarm/6.JPG
Here's the chip, I don't see how I can make it smaller or cut anything (but I understand nothing in these kinds of stuff)
http://s89754395.onlinehome.us/alarm/7.JPG
So we have to figure out how can we squeeze it in
buttons are no problem, even though they don't allign perfertly if I apply the chip on the housing, I can just figure out an adapter so the housing buttons would reach the key ones
pboblem is as you see is fitting, housing space is limited and I can perhaps win not more then 1 or 2 mm there but cutting the inside gates
what do you guys think?
thought I may give it a try because I HATE the banging sound from the alarm module remote on the steering column....:furious: in my forester I put some soft stuff on the column, but now I need to extend my imaginagion plus always wanted the audi-like key
got it today and it happens to be much harder, if possible at all, then I expected
let the pics talk for themselves:
This is OEM remote:
http://s89754395.onlinehome.us/alarm/1.JPG
disassembled
http://s89754395.onlinehome.us/alarm/2.JPG
here's the new gadget, already opened by me
http://s89754395.onlinehome.us/alarm/3.JPG
Here's the OEM chip next to the new housing
http://s89754395.onlinehome.us/alarm/4.JPG
And here's the problem
http://s89754395.onlinehome.us/alarm/5.JPG
Obviously I would have to use circle battery, no problems here
http://s89754395.onlinehome.us/alarm/6.JPG
Here's the chip, I don't see how I can make it smaller or cut anything (but I understand nothing in these kinds of stuff)
http://s89754395.onlinehome.us/alarm/7.JPG
So we have to figure out how can we squeeze it in
buttons are no problem, even though they don't allign perfertly if I apply the chip on the housing, I can just figure out an adapter so the housing buttons would reach the key ones
pboblem is as you see is fitting, housing space is limited and I can perhaps win not more then 1 or 2 mm there but cutting the inside gates
what do you guys think?