highmilehatch
06-20-2006, 11:23 AM
We are proud to offer our swap services to the members of TriStateTuners. If you are just looking for a basic swap to build upon, or a reliable, high powered street/strip machine, we can handle the entire process from beginning to end.
These engines are used from Japan, and are sold with installs only. Each engine is thoroughly inspected before installed. If the engine has obvious defects upon initial startup (spun bearings, knocking, blown headgasket), it will be dealt with between ourselves and our suppliers; you will not incur any additional charges.
These are complete turn-key swaps consisting of a complete engine bay wash, necessary wiring harness modification and extension, re-routing of heater hoses, new accessory belts and fluids, fully functional A/C and power steering.
We take alot of pride in our work and it will reflect in the end product. Remember that you are receiving a high quality product and service.
We've put together a few swap packages to meet different budgets and power goals. This is just a general guideline. Certain parts can be upgraded if requested. The prices you see INCLUDE INSTALLATION as well as the listed parts.
S13 SR20DET Stage 1:
This kit will basically be stock configuration, with the addition of a downpipe and higher flowing air filter. Boost is kept at the factory regulated 7 psi. 200-210 hp.
-Walbro 55 LPH Fuel Pump
-OEM SR20DET Radiator and Fan Shroud
-Samco Radiator Hoses
-Z32 Fuel Filter
-OEM Oil Filter
-NGK BKR7E Spark Plugs
-A'PEXi Power Intake Kit
-Greddy 3 in. Downpipe
-OEM Side Mount Intercooler
-OEM Clutch
$4495.00
S13 Blacktop add $250.00
http://www.street-solutions.com/_images/engines/freshalloypic2.jpg
S13 SR20DET Stage 2:
Power upgrades are mild, yet still provide a solid foundation to build upon. Boost is kept at the factory regulated 7 psi. If a boost controller is added
to the stage 1 package, boost can safely be increased to 12 psi. Some may say you can run 15, but in the interest of keeping our customers' engines together, this is what we recommend. 215-245 hp.
-Walbro 255 LPH fuel pump
-OEM SR20DET Radiator and Fan Shroud
-OEM SR20DET Radiator Hoses
-Z32 Fuel Filter
-NGK BKR7E Spark Plugs
-Greddy V-Spec Intercooler Kit
-Mazda Miata Battery (required for intercooler install)
-Greddy 3 in. Downpipe
-Apexi Power intake Kit
-HKS SSQV Blow Off Valve w/Hot Pipe
-Exedy Stage 1 Clutch Kit
-Omori 52mm Multi-color Boost Gauge
$5695.00
S13 Blacktop add $250.00
http://www.street-solutions.com/_images/engines/freshalloypic.JPG
S14 SR20DET Stage 1:
This kit will basically be stock configuration, with the addition of a downpipe and higher flowing air filter. Boost is kept at the factory regulated 7 psi.
210-225 hp.
-Walbro 255 LPH Fuel Pump
-OEM SR20DET Radiator and Fan Shroud
-OEM SR20DET Radiator Hoses
-Z32 Fuel Filter
-OEM Oil Filter-NGK BKR7E Spark Plugs
-A'PEXi Power Intake Kit
-Greddy 3" Downpipe
-OEM Side Mount Intercooler
-OEM Clutch
$5395.00
http://www.street-solutions.com/_images/engines/freshalloypic3.jpg
Again, these packages are just a guideline. Any questions, PM or email me at jon@street-solutions.com
These engines are used from Japan, and are sold with installs only. Each engine is thoroughly inspected before installed. If the engine has obvious defects upon initial startup (spun bearings, knocking, blown headgasket), it will be dealt with between ourselves and our suppliers; you will not incur any additional charges.
These are complete turn-key swaps consisting of a complete engine bay wash, necessary wiring harness modification and extension, re-routing of heater hoses, new accessory belts and fluids, fully functional A/C and power steering.
We take alot of pride in our work and it will reflect in the end product. Remember that you are receiving a high quality product and service.
We've put together a few swap packages to meet different budgets and power goals. This is just a general guideline. Certain parts can be upgraded if requested. The prices you see INCLUDE INSTALLATION as well as the listed parts.
S13 SR20DET Stage 1:
This kit will basically be stock configuration, with the addition of a downpipe and higher flowing air filter. Boost is kept at the factory regulated 7 psi. 200-210 hp.
-Walbro 55 LPH Fuel Pump
-OEM SR20DET Radiator and Fan Shroud
-Samco Radiator Hoses
-Z32 Fuel Filter
-OEM Oil Filter
-NGK BKR7E Spark Plugs
-A'PEXi Power Intake Kit
-Greddy 3 in. Downpipe
-OEM Side Mount Intercooler
-OEM Clutch
$4495.00
S13 Blacktop add $250.00
http://www.street-solutions.com/_images/engines/freshalloypic2.jpg
S13 SR20DET Stage 2:
Power upgrades are mild, yet still provide a solid foundation to build upon. Boost is kept at the factory regulated 7 psi. If a boost controller is added
to the stage 1 package, boost can safely be increased to 12 psi. Some may say you can run 15, but in the interest of keeping our customers' engines together, this is what we recommend. 215-245 hp.
-Walbro 255 LPH fuel pump
-OEM SR20DET Radiator and Fan Shroud
-OEM SR20DET Radiator Hoses
-Z32 Fuel Filter
-NGK BKR7E Spark Plugs
-Greddy V-Spec Intercooler Kit
-Mazda Miata Battery (required for intercooler install)
-Greddy 3 in. Downpipe
-Apexi Power intake Kit
-HKS SSQV Blow Off Valve w/Hot Pipe
-Exedy Stage 1 Clutch Kit
-Omori 52mm Multi-color Boost Gauge
$5695.00
S13 Blacktop add $250.00
http://www.street-solutions.com/_images/engines/freshalloypic.JPG
S14 SR20DET Stage 1:
This kit will basically be stock configuration, with the addition of a downpipe and higher flowing air filter. Boost is kept at the factory regulated 7 psi.
210-225 hp.
-Walbro 255 LPH Fuel Pump
-OEM SR20DET Radiator and Fan Shroud
-OEM SR20DET Radiator Hoses
-Z32 Fuel Filter
-OEM Oil Filter-NGK BKR7E Spark Plugs
-A'PEXi Power Intake Kit
-Greddy 3" Downpipe
-OEM Side Mount Intercooler
-OEM Clutch
$5395.00
http://www.street-solutions.com/_images/engines/freshalloypic3.jpg
Again, these packages are just a guideline. Any questions, PM or email me at jon@street-solutions.com