PDA

View Full Version : Camaro's


87camaroPA
04-11-2005, 01:28 AM
Who all has a camaro? What year? What engine? What all mods?
Thanks :rock:

1988 Olds
04-11-2005, 08:53 AM
My brother does. 1984, 305, Just some stereo stuff right now.

DropTopChevy
04-11-2005, 10:02 AM
Camaro here
1995 3.4L V6
5spd. Manual
K&N filter
Dynomax Exhaust
Stereo System

Dont worry itys slow

Miller

87camaroPA
04-11-2005, 06:07 PM
Mine is a 1987 Camaro 2.8 V-6 hollowed out CAT because if a stupid man hole cover sticking out of the ground about like 4 inches. Lets just say ouch!! O and is is really slow top speed 115mph.
:rock:

DropTopChevy
04-11-2005, 07:55 PM
My fuel cuts off for a second every time the speedo hits the little knob just past 115. Books say that the 3.4 tops out at 121 so i guess thats what it is. Yeah my engine is the 2.8 bored out a little but its the same block.

Miller

87camaroPA
04-12-2005, 01:52 AM
My fuel cuts off for a second every time the speedo hits the little knob just past 115. Books say that the 3.4 tops out at 121 so i guess thats what it is. Yeah my engine is the 2.8 bored out a little but its the same block.

Miller

Well i dont even know if it is really 115 mph though because my spedo stops at 85. The niddle just bounces for a little and then just stops all the way down on the peg but it is so weird the car just stops accelerating.

the mike
04-20-2005, 08:47 AM
I had a 78 Type LT. Built 350, shift kit in the TH350 trans, gutted interior, cowl induction L-88 hood(which I would NOT recommend, water collects in the lower scoop and gets algae). Blew the rear out of it and replaced it with really low gears, like 2.73's...talk about top end!!

I forget why I got rid of it, but I did. The motor went into a 79 Malibu I had.
My favorite muscle car is the 70 1/2 spilit bumper, and my girls is the first model 67 RS/SS.

Whiterice1999
04-25-2005, 11:56 AM
I have a 1995 Z-28 LT1 Automatic.
SLP CAI, Kenny Brown SFCs, Lowered 1.5", Solid Heim aluminum LCAs adjustable, Pan hard bar adj., Descreened MAF Polished, STB, Removed back seats.

Things waiting to go on the car, JBA shortie headers, Willwood 13" Disk brakes front & back, MSD HI 6S Ignition, and Rebuilding the motor since I think I hurt my engine. Darn water pumps! I can't decide whether to make it SuperCharged, Turbo, or all motor...

87camaroPA
04-25-2005, 12:26 PM
If i were you i would go all motor.
And i also hurt my car i just found out i broke the torque converter clutch and my dad unpluged the torque converter and now i am only getting like 10 mpg and i was getting 20 mpg. I geuss it is time to retire the Camaro.

HickRocket1258
05-04-2005, 09:38 AM
I have a 1985 Camaro Z28
engine:
so much done, dont feel like posting haha
it's basically a 350 bored and stroked to a 383

trans:
racing turbo 350
tci streetfighter torque converter (3000 stall)
tci trans cooler
tci heavy duty flexplater
hurst quarter stick shifter

exhaust:
hooker super comp headers
4" catylitic converter with 4" exhaust

rear:
moser 9" rear with heavy duty 28 spline axles
moroso racing studs
richmond 3.73 gears

suspension:
comp engineering subframe connectors
lakewood traction lower control arms
comp engineering driveshaft loop

also got 3" fiberglass hood and weld prostars with bf goodrich drag radials
it is full interior as well

heres a pic
http://img.photobucket.com/albums/v89/meblaise/robsucks.jpg

the mike
05-04-2005, 09:50 AM
Nice F body. When's the big track unveiling? Looks like it is well set up, I am curious to see what it will do. :rock:


**edit** Is that a kart motor in front of the Camaro?

HickRocket1258
05-04-2005, 10:25 AM
I'm not sure when it's gonna get out but I can't wait. My dad and I have to do some little things to it like cut off switch and a couple little things. It should run 11's though I'm hoping.

The little engine is a jr dragster engine. My brother is currently running jrs at the age of 17 and I just finished running them last year. It's a whole lot of fun running them.

the mike
05-04-2005, 10:32 AM
Cool, cool. :thumbup:

Blaise
05-04-2005, 10:40 AM
4" catylitic converter

Wtf Rob. You need to yank that crap, we don't run emissions equipment around here.

84camaro
05-04-2005, 03:24 PM
84 camaro...305 carburated...15.84 in the quater...17s centerline custom wheels...flomaster...chrome airfilter top..

94RedReaper
05-09-2005, 11:48 PM
Red 94 Z28. Edelbrock headers, A4, 3.73 gears, 52mm T-Body, 1.6 Gold RR, subframe connectors, Eibach lowering springs, Home made CAI, Hypertech, 160 T-stat, 3" exhaust w/single outlet Vortex Muffler, smaller pullies, Granatelli rear suspension, Rear LCA relocators.

Best ET 12.98 on 8 year old DR's (That's right 8yrs and over 30 passes) :thumbup: BF Dr's
Best MPH 107.5 on 8 yr old DR's

New race trans and 3200 stall next :thumbup:

DropTopChevy
06-28-2005, 09:48 AM
Wheres that kid with the 4th generation blue camaro that ive seen at the meets he has the 3800 motor?

Miller

SilverTurboRidin
06-28-2005, 11:13 AM
Wheres that kid with the 4th generation blue camaro that ive seen at the meets he has the 3800 motor?

Miller

That would be Dan, friend of mine and a few other's

I dont think he post's though

DropTopChevy
06-28-2005, 11:36 AM
man i think the last time i saw the kid was the saturday behind la fitness but i dont remember much from that night? yeah it was good to have another 4th gen around

Miller

87camaroPA
06-28-2005, 05:44 PM
Why you selling your Camaro DropTopChevy?

2point4DSM
06-28-2005, 06:12 PM
4" catylitic converter
Wtf Rob. You need to yank that crap, we don't run emissions equipment around here.

Haha, I got a 3" cat here. And my car should keep up pretty well. Well, at least you won't blow me away by 10-20 car lengths, lol.

Demonicbird00
07-07-2005, 02:30 PM
not a camaro, but a f-body

2000 tans am black m6

mods include... LTs, true duals,ls6 intake, ported and polished TB and MAF, minor tuning,SFCs,LCAs,PHR,STB,Springs,shocks,160* stat, DRs



**side note**
I race karts, figured id throw that in since i saw the mike inquire about the engine

LSHatch
07-07-2005, 02:43 PM
^^^^^^

Your T/A gives me wood.

79Poncho
07-07-2005, 02:45 PM
Well, if we're mixing in TAs... '79 Trans Am, 400 (6.6L for those metric people), 3A, 3.23s mostly stock otherwise... looking for 13.5s @ 99.

: demonicbird00, you going to Pontiac Nationals in November? If so I'll see you there.

Demonicbird00
07-07-2005, 02:59 PM
at atco???

if im off ill be there!! i was there in 03 in the show, but at the time i only had black zr1 wheels

now i have the WS9 hood (WS6 Hood w/ the Firehawk heat extrators), black z06 wheels.

im going to be painting the lower rear bumper silver, i still need to paint the hood and front left fender.

thanks for the compliments!!

87camaroPA
07-11-2005, 02:10 PM
Nice T/A man. :thumbup: :supz: :rock:

DropTopChevy
07-26-2005, 03:19 PM
Im selling my camaro cause i got another car that is bigger and can actually fit my portfolio. The whole sports car ride is not my style anymore cause i have fallen in love with the large luxury car. You know anyone interested cause i am willing to negotiate now that i went out and got the second car.

Miller

2001orangess
09-14-2005, 11:24 AM
i have a 2001 camaro ss.

have some mods

i'm around northern jersey

DropTopChevy
09-14-2005, 01:26 PM
Nice, I have always had respect for the SS.

Miller

blkbomber01
10-10-2005, 01:19 AM
i used to have an 80 z-28 and an 86 iroc... had to get rid of them cause the house thing and gas prices :cry:

onebadassZ
04-18-2007, 03:27 PM
i got a 93 camaro m6 lt1

96z28fella
04-18-2007, 04:07 PM
i have a 96 Z28..for sale..few mods

PhillyLS1
04-19-2007, 05:44 AM
I've been known to drive a camaro from time to time.

CAM93Z
04-19-2007, 11:53 AM
I Hear That!!!!

SStealth2k
09-12-2007, 03:21 PM
2000 camaro SS M6

slp lid, UD pulley, smooth bellow, MAF, ported TB, SLP LM's, TB bypass, Eibach prokit, 18in gunmetal ZO6's with polished lip

doug
09-12-2007, 04:53 PM
1969 Z/28 Camaro, original numbers matching Z/28 with only 42,700 miles, 302, 4.10 gears.

1badSS
09-12-2007, 06:04 PM
99 Camaro SS...just look at my sig for the mods

Alex1
10-19-2007, 12:46 AM
95 Camaro Z28 here. 6-Speed.

Kevin
10-19-2007, 02:20 AM
1967 Camaro RS, needs restoration. Any takers?

TurboDSMJ
10-19-2007, 06:16 PM
2002 SS. I don't tell anyone my mods. It IS black though. Haha.

smg267
10-30-2007, 05:30 PM
01 Z/28. SLP longtubes,bellow,dual dual,lid, S3 throttle body

appeance: 17x11 Zr1's, OEM SS hood, SS spoiler, Berger Panel, T/A Power Antenna, LT1 tails, T/A gauge bezel, T-handle, 69' emblems, !molding etc..............

DocEwww
12-08-2007, 06:37 PM
I have a Pontiac Camaro ;)

Jersey_TA
12-11-2007, 01:08 AM
I have a Pontiac Camaro ;)

LOL:lol:

fsburnout216
01-31-2008, 10:46 PM
no camaro but sticking with the f body i got a firebird. v6 pu**imatic with t top and bone stock everything. we ll see how long that lasts

SleeperGoat
04-15-2008, 03:59 AM
I got a 84 Camaro use to be a 305 slow POS. Way to much being done now if you need more info check out members journals just started it last week. Estimated 9's 1/4 mile but still unknown for now.

OutToWinPAHC
09-07-2008, 03:56 PM
I dont have a Camaro, just the heart of one kinda (A WS6) motor. Anyhow I'm looking for a F body LS T56 if anyone has one.

Elusion
03-10-2009, 08:34 AM
http://i221.photobucket.com/albums/dd230/LuciferPDX/My%20Car/IMG_0982.jpg

my babies back in st. louis

driftingrx5.7
03-10-2009, 11:07 PM
wow nice! i guess mine doesn't count
88 rx7 lt1/t56 :D

peteyturbo
03-11-2009, 01:00 AM
I have my eye on the new one:)

Kevin
03-11-2009, 01:01 AM
Selling mine Friday. :inlove: $$$$$$

Elusion
03-11-2009, 01:32 AM
I have my eye on the new one:)

O YAAAA(kool aid style..)

8ty8_LS1
04-13-2009, 01:06 AM
i've got a 2000 LS1 Z28

GetUpTop
05-03-2009, 08:29 PM
Yes! I drive an 82 Camaro z28. Just dropped a 350 in it, headers, 4 barrel carb, intake, rear, suspension, ect... trying to get it on a dyno soon.

Nick Merrone
05-03-2009, 08:41 PM
My first project was a 1992 Camaro RS aniversery edition one. all I had was a flowmaster exhaust, and an air cleaner.

HickRocket1258
05-04-2009, 06:27 PM
Yes! I drive an 82 Camaro z28. Just dropped a 350 in it, headers, 4 barrel carb, intake, rear, suspension, ect... trying to get it on a dyno soon.

I'm going to guess you get the low 300 range. What kind of trans.

GetUpTop
05-04-2009, 11:42 PM
I'm going to guess you get the low 300 range. What kind of trans.

It's an auto trans off of an 87 trans am i believe. It needs to be upgraded. My biggest battle right now is passing inspection :eek:

Z/28
05-05-2009, 09:10 AM
what color is it? I see a green one everyday on the way to work.

GetUpTop
05-05-2009, 05:05 PM
what color is it? I see a green one everyday on the way to work.

Mine's black if that was directed towards me.

http://i44.tinypic.com/ws0abs.jpg

http://i40.tinypic.com/2d91mwz.jpg

02Sweet
05-19-2009, 09:33 AM
I have a 2002 Z28, its navy blue metallic with a sunoco hood.

The mods I have are Long tube headers, Off road y pipe (catless) SLP loud mouth 1 cat back, SLP cold air induction system, UMI lower control arms, pan hard bar, sub frame connectors, upgraded the rear to a 3.42 from a 2.73, and some other things i probably forgot

z28guy3
05-22-2009, 10:08 PM
I've got a couple

01 Trans-Am WS6
05-25-2009, 12:03 AM
2001 Trans-Am WS6 here....cammed, full bolt-ons, Spec Stage 3 clutch. 12.56 @ 115 best time so far and dyno'd 407RWHP and 382 ft.-lbs. Still running street tires BTW, with a 9'' or 12-bolt rear and some good tires i'll be high 11's as it sits motor wise. After that is spray.

98Z28camarojg
03-31-2011, 04:02 PM
1998 Black Z28 with 6-speed. Mods are in my sig! If you see it on the road, you'll hear it first haha

Kahdir
07-29-2011, 07:36 PM
2010 SS w/ LS3 (6M) Airaid intake, Corsa exhaust, Hurst shifter & Eibach springs and sways.

Looking to change gears to 4.11s, billet caps & LPW diff and then headers.

dugganzx3
08-09-2011, 11:01 PM
I was just considering starting something like this, but this doesn't look dead so here we go.

1996 Chevy Camaro RS y87 fully loaded with leather and t-tops, 3.8l stock(for now) with an exhaust. Has 3:42's with a posi and is a 5 speed. The plans are a new pcm with a tune, cai, and eventually an n/a build up with stage 1 cam, valves, springs, etc. Hopefully 2 inch drop with some different wheels eventually. Has a few visual mods too, nothing crazy.

So are any of you F body guys in the Scranton area and still active here, a few of my friends and I chill at sheetz and some other places at night if anyone is interested.

PhillyLS1
08-11-2011, 07:54 AM
http://i49.photobucket.com/albums/f280/v8firebird/My%20Camaro/DSC_0077.jpg

I've started to become active again in the Philly area now that my job has settled down some. Good to see other mullets out there.

OMGz Turbo
08-11-2011, 10:06 AM
http://i49.photobucket.com/albums/f280/v8firebird/My%20Camaro/DSC_0077.jpg

I've started to become active again in the Philly area now that my job has settled down some. Good to see other mullets out there.

I was showing my brother your youtube vids. LOL ****ing monster

PhillyLS1
08-11-2011, 10:18 AM
I was showing my brother your youtube vids. LOL ****ing monster

Its faster and lighter now. I re-did the whole engine bay. I'll post picks when its done.

89StangGT
08-26-2011, 07:29 PM
http://i49.photobucket.com/albums/f280/v8firebird/My%20Camaro/DSC_0077.jpg

I've started to become active again in the Philly area now that my job has settled down some. Good to see other mullets out there.


Im OMGz brother but in my opinion you have THE nicest camaro in the philly area.

SleeperGoat
09-02-2011, 01:01 AM
There was a dude up in quakertown with a crazy setup like that but recently sold it to buy a house. Almost sold my GTO for it he drove the damn thing everywhere and was still capable of amazing things lol.

lsx427
03-26-2012, 09:40 PM
2010 camaro with an lsx 427 and a procharger F1C. Mini tubbed for 345s

PAFirefighter11
03-27-2012, 03:13 PM
2010 camaro with an lsx 427 and a procharger F1C. Mini tubbed for 345s

http://www.coloradohpjunkies.com/forums/images/smilies/this_thread_is_worthless_without_pics.gif

lsx427
03-27-2012, 10:40 PM
Its currently in michigan getting mini tubbed and cage installed. This is when it had a kenne bell 3.6 on top of an lsx 416.

lsx427
03-27-2012, 10:40 PM
Here it is.

BlueEyedSuicide4
11-13-2012, 05:01 PM
2001 Pontiac Trans Am WS6 with over 105k miles :)

https://sphotos-b.xx.fbcdn.net/hphotos-snc7/601160_10151048639172577_1754433398_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-snc6/253723_10150294049772577_3624538_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-ash4/251017_10150293933212577_2191249_n.jpg

sti04dude
09-25-2013, 08:19 PM
Woo hoo...first Camaro post in almost 1 year !
I used to have an STi, now I have this: :mrgreen:
http://i291.photobucket.com/albums/ll310/sti04dude/IMG_1934as.jpg

dugganzx3
11-09-2013, 05:52 PM
Woo hoo...first Camaro post in almost 1 year !
I used to have an STi, now I have this: :mrgreen:
http://i291.photobucket.com/albums/ll310/sti04dude/IMG_1934as.jpg

freakin love it man, that color looks great.

doug
11-09-2013, 06:42 PM
https://scontent-b-lga.xx.fbcdn.net/hphotos-ash3/1003504_10104826455686004_1874257225_n.jpg

Mach1
01-03-2014, 01:53 PM
I just cant get into the new Camaro style, the revamp this year makes it a LITTLE better to me, but after the 80's early 90's body style they just haven't been appealing to me. I do really love the drivetrains that Chevy uses. Just not the body styles. The WS6 Trans-Am, those I freaking LOVE.

My dad was a huge Camaro fan when he was younger, he had a 69 RS/SS Pace Car, and he refuses to accept the new ones as a Camaro. It's driven him to actually start liking Mustangs.

lsx427
02-03-2014, 09:20 PM
Nice ZL1, This is my SS