b14 rear beam

[jonnyxvedge]

I just picked up a b14 rear beam from a 200sx se-r. I'm going to swap it to my b14 sentra to convert drums to disc. Do I need to upgrade my master cylinder or propotioning valve? Thanks

[enohand]

do you have brake lines in the back?

you might need to run some...i dont ever seen a b14 rear end so i dont know...

i would think that your best bet would to be to get the SER (sentra or 200sx) MC & proportion valve, or get it off of a altima..(no proprtion valve since no abs..but its has valves in the MC its self, they are residual presusre valves.)

i am in the process of converting my p10 from ABS to non abs with a 15/16th non ABS MC & the residual pressure valves

[jonnyxvedge]

I do have breaklines in the back, the beam I got also has 2 break lines on it. would it be safe to just use my stock ga stuff or should I upgrade to the ser MC and valve? or would it be easier/better to get the altima mc?