Rotary Dyno day any interest

[full-cruise]

NO TUNING EVENT / PULLS ONLY
location is
212 lincoln highway fairless hills pa 19030 .. close to I95 and NJ

It is just past the perruzzi nissan dealership on the right behind the macco building.
This is a clean and professional location and simple to get to.

we can run any foreign or domestic car, truck, motorcycle and ATV this day. he is EFI 101 and EFI advanced certified so he can handle any engine management system that you have. but i would like for this to be a rotary event

the dyno is a new Dynocom 5000 2WD eddy brake twin 8.5 inch roller chassis dyno. It can handle up to 1250whp and can perform steady state load and inertia testing. This means that you can get your true horsepower level on a single pull and perform various load testing to get the best numbers for the street and track app.

im trying to get a good turn out for a weekend in April. would be nice to get at least 8 cars in on this, he has a guy that will take high def video of your cars on the dyno and a shot of the dyno numbers only if you want when it is done.

please feel free to chime in where just throwing this out there to see if theres interest & would like to come out and meet up..

Dyno rates and specials
$60 for 3 pulls on one car with AFR readings
$100 for 3 pulls on two cars with AFR readings
$135 for 3 pulls on three cars with AFR readings
$160 for 3 pulls on four cars with AFR readings

[SpendOne]

Maybe ill bring my rotary....lol. I heart you Maine.

[full-cruise]

o yea you have to bring your beast up. anything is welcome just seems the rotary guys are the hardest to pull out the woods anymore lol, but put the word out

[amp]

might just come out to watch... dont think my single turbo build will be done in time..
ill try and convince a few other fds to come down..

[xdrift0rx]

I hope to have my turbo swap finished. let me know the date.

[davin]

I wanna watch!

[l337fpc]

I'm down, I'll need to get base line numbers when i rebuild my motor.

Can this be in early april? If so, I'm down.

[rotarychainsaw]

I would definitely come to hang out. I remember an rx8 dyno day in PA a few years back that was quite fun.

[l337fpc]

I would definitely come to hang out. I remember an rx8 dyno day in PA a few years back that was quite fun.

I'm sure if the rx7/rx8 clubs were invited there'd be a good sized turnout.

[prew]

I would do 3 pulls if its early in April.

[disstractin_FC]

id throw the fc on the dyno, kinda curious about the new setup

[Simmons-Racing]

I am interested, as long as I am not racing the same day.


Simmons

[rickeo]

I would be down. Curious what my MM tuned Renesis can do (not holding my breath :rotfl: )

[l337fpc]

Curious what my MM tuned Renesis can do (not holding my breath :rotfl: )

I see what you did there :cool:

[prew]

Seems like a lot of interest, hope this happens so I can meet some more local rotary people.

[Twisted tuning]

As long as more than four cars go on the rollers it would be $40 for three pulls. This is our new location and it is much cleaner and a more professional location. Working on getting a couple rotary drag cars to come out as well.

[SpendOne]

I have to fix my broken rear (twisted axle tube) so I can be ready.

[full-cruise]

I'm sure if the rx7/rx8 clubs were invited there'd be a good sized turnout.

i have it posted on the rx7club but there seems to be no interest if you would like to post this on the rx8club by all mean go ahead im not a member there to do soo.

[lepichichi]

You would defenetly get more response in the rx8club.com

[disstractin_FC]

i agree with lepichichi, sadly rx7club isnt what it once was. nothing but little kids now.

[BLSOHRD]

I'm definitely interested. I have a mostly stock Z but I would like to know what my base numbers are now :)

[davin]

i agree with lepichichi, sadly rx7club isnt what it once was. nothing but little kids now.

That is the 2nd Gen crowd. The 3rd Gen crowd is totally different and more mature :-p

[disstractin_FC]

Ya... I wouldnt day mature tho lol

[akley88]

id sign up and pay for a dyno just to hear all of those rotaries running, if you wouldnt mind a mitsu.

[Twisted tuning]

Its a 2wd dyno.

[akley88]

Its a 2wd dyno.

o i drive a 4g eclipse so its fwd

[full-cruise]

looking good so far. there may be some vetts coming in from nj

[amp]

im assumin rotary gets priority in the order of dyno use....

[disstractin_FC]

this thread got my ass up to get the 7 running again. Started it today with just the downpipe on it and i think i may have cried a little bit lol

cannot fricken wait for the dyno

[Twisted tuning]

Maybe sunday april 15th might be a good date. That way maybe the vette boys can take on a certain porshe that night. How does that date sit.

[full-cruise]

this thread got my ass up to get the 7 running again. Started it today with just the downpipe on it and i think i may have cried a little bit lol

cannot fricken wait for the dyno

i feel ya man trust me im about ready to put the papers and badges on to get out there. i just been redoing plugs and fluids need to get a tp3 and maby enlarge the intercooler piping to turn it up alittle, but its running and ready for the most part.

the halfbridge s370 setup you have going i would love to hear.

[disstractin_FC]

Ill try to snag a video tomorrow when i take it out, and u need a tps?

[full-cruise]

yea my s4 tps is alittle loose. i hav a nail jammed in in the casing to try n keep it locked

[lepichichi]

Maybe sunday april 15th might be a good date. That way maybe the vette boys can take on a certain porshe that night. How does that date sit.

so is it April 15/2012?????

if so, time??? let me know so I can post it on the rx8club

btw looking fwd to meet everyone

[amp]

looks like ill be runnin instead of watchin... im ahead of schedule and can make the date..

[full-cruise]

I'm stopping by there today ill find out a time for us and post it up asap.

[l337fpc]

bump?

[Twisted tuning]

Start time will be ten to give the neighbors a little chance to sleep in.

[lepichichi]

I'm stopping by there today ill find out a time for us and post it up asap.

any updates on this???? thanks

[full-cruise]

Yes 4-15-12 from 10am to when ever

[lepichichi]

Nice :)

[full-cruise]

counting them down

[disstractin_FC]

just about ready for the dyno!

[full-cruise]

ugh the rotary grimlen found me. I'm having that red error light pop up on my lt8s n can't get my laptop to connect.

[disstractin_FC]

i got the flashing red light lol, mine is just for a sensor tho. i did however discover totally destroyed rear hubs... hopefully get the new ones installed before the 15th

[full-cruise]

yea I'm %99. sure it flashing because of the tps. i finaly got the laptop to see the Ecuador but i can open up the maps. going to download the 2.0 update n see if many that will change anything.

[full-cruise]

she's all good. had her out tonight's on the hunt. love that car lmao

[Twisted tuning]

One week away. Make sure you guys have fresh oil, no fluid leaks, no vacuum leaks, rear tires that hold tire pressure, rev limits set, good condition trannies, proper gas and boost limits set. No slicks allowed on the dyno. We are the third building behind the maaco in the falls autocomplex. Call 215-310-8851 for directions or questions.

[SpendOne]

Whos running the cars on the dyno? Reason I ask is if I run my car I would feel alot better knowing that I can shut it down if the nitrous acts up.

[full-cruise]

matt give that number a call an talk to brian. i kno your dyno friendly and have hands on experience with them. give him a ring and talk that over with him he may make an exception for race cars..

[full-cruise]

Nice :)
i placed it on the rx8 forum maby you can stop in on there and add your post count.
http://www.rx8club.com/showthread.php?t=231740

[disstractin_FC]

Looks like im done, cant find the wheel bearing seals anywhere local so im beat.

[full-cruise]

did you try the dealer .. but i get alot of my oem parts from autopartsdeal.com quick shipping but great prices

[disstractin_FC]

odered everything to have it in time, got the call to pick it up and the seals werent there. The guy failed to tell me they didnt have the seals, so pretty much two $7 parts are keeping me from going to this. Im past being angry, maybe it happened for a reason... i dunno

[full-cruise]

so who a definite for sunday

[Twisted tuning]

Hey distraction. I am doing a nissan one next saturday if you can make that one you can run then. If anyone has a friend with a different car they can run also. Just taking rotary cars first and i am not trying to make it super huge.

[disstractin_FC]

i may just do that, found the seals just wont get em till monday lol

[Twisted tuning]

I appreciate you making sure your car is dyno ready. We will start at ten next saturday.

[Twisted tuning]

Dyno is ready. Stop by and Check it out.

http://i153.photobucket.com/albums/s209/zmainiac/b465f9f9.jpg

[SpendOne]

Sorry I couldnt make it out as I was trying to help a friend finish his car. Glad you guys came out last night though. Just sucks that 1 car broke.

[full-cruise]

yea maby we can get you in another time for ****s an giggles. but man you have your rex running strong and it is ashame his car went into limp mode but im sure with you there to help him its going to get done write this time around..

here a link on the roller http://www.youtube.com/watch?v=QNvK1Qd-TYY

[SpendOne]

Can you post up the vid from late last night?

[Twisted tuning]

Yeah man, let me know if you and your buddies want some dyno time. We can set up something small if you want. We will definately be out a lot more. Doing a nissan dyno day next saturday and any rotary is welcome that couldnt make it last weekend.

[full-cruise]

Can you post up the vid from late last night?

here ya go bro

http://youtu.be/xCTrS_PIe4c