Need OEM Replacement Injector O-Rings for D-Series... discontinued?

[TROLL]

Can't find info anywhere... looking for replacement injector o-rings for a Honda D-series motor but apparently the OEMs are not available from 1988-2000... wtf? The only way they're available is in an 'injector kit' for about $600 for the set of 4.

So, what do guys do when they need replacement o-rings? This has got to be a common issue since this applies to so many different cars. Autozone had a replacement o ring kit for $40 for a set of four, this is the only possibility I've found so far.

Honda part number is 91301-PR3-003

Is this a good option or is there something better?
Thanks in advance...

[ketchup!]

have you checked honda-tech?

[TROLL]

Yeah I've searched a bit everywhere... we are probably going to end up reusing the ones that look good and I'm confident they'll work, but I'm pretty surprised that these aren't plentiful with all of the cars that use them.

[420sx]

http://www.prostreetonline.com/oem/wizard.asp?year=1998&make=HO&model=CVC-EX2-002&category=C&part=Fuel+Injector+O-Ring

[420sx]

http://www.redlinemotive.com/replacement/honda/fuelinjectorsealkit.asp

[TROLL]

Thanks for the links... I also found a seal kit on rockauto.com

At the end of the day I actually have 12 injectors to choose o-rings from and have enough good ones to work with here so we'll be able to get the car back on the road without waiting on parts to arrive. Seems so strange for Honda to stop making this part available on its own though, especially since it was used as recently as 2000...

[Big_Jim]

as recently as 2000 is still an 11 year old vehicle....

[cvcrcr99]

You should be able to order them from hondpartsdeals.com. I ran the part number you provided in the OP and it comes up as O-RING (23.8X1.9) - $2.83.