D16y7

[ROLLIN SUICIDE]

i have a 95 civic and i was told it has a swapped 1.5L sohc but i pulled the # off the head and it was D16Y7, and when i looked up the motor on google pics i saw that they had the vertical intake but mine has the horizontal intake, can anyone explane this to me or give me some hints as to where or what to look for? also i am wanting to trubo this car any recomendations as to what turbo gives the best bang for the $$. im looking at setting it up for drag racing and my DD but im not sure yet because im not very close to any drag strips, im in johnsburg ny up near gore mountian.. :drag:

[scott8989]

buy my d series turbo kit lol and there should be a stamp on the block right next to the transmission that will tell you what motor it is. if you want some more info shoot me a txt at 484-354-0995

[Ej6Mike]

Chances are, if your running the d15b8 (8-valve), a swap to the y7 head would get you better flow (16 valve). Swap to a civic EX intake manifold too.

[ROLLIN SUICIDE]

buy my d series turbo kit lol and there should be a stamp on the block right next to the transmission that will tell you what motor it is. if you want some more info shoot me a txt at 484-354-0995

what ya want for it id trade ya some stuff i have i dont really have the extra $$ at the moment and i have a ticket i have to pay, and i looked and do you have any good pic of where it would be located? (the numbers that is?)

[ROLLIN SUICIDE]

Chances are, if your running the d15b8 (8-valve), a swap to the y7 head would get you better flow (16 valve). Swap to a civic EX intake manifold too.

do you mean i should swap to a ex mani? it has a header to the cat which im not sure if its gutted or not, then its all straight piped to my 3'' vibrant muffler then out..

[scott8989]

shoot me a txt to that number I posted and we can talk. I'm near west Chester pa. depending what you have ill trade ya and I can send you pictures through txt

[ROLLIN SUICIDE]

shoot me a txt to that number I posted and we can talk. I'm near west Chester pa. depending what you have ill trade ya and I can send you pictures through txt

I Tryed to text you but phone is broken I sent you a message through my aim and Im not sure if it sent or not..

[Ej6Mike]

I meant swap the INTAKE manifold, sorry if i didnt clarify. The d15 manifold is hilariously tiny and restrictive.

[ROLLIN SUICIDE]

I meant swap the INTAKE manifold, sorry if i didnt clarify. The d15 manifold is hilariously tiny and restrictive.

Gottcha so the horizontal on that I have I saw a d15 forsale and the intake looks just like my intake so it's more than likely a d15 with a d16y7 head and a stock d15 intake.. Hmmm are all the intakes and headers for a d-series all the same bolt pattern or are there some that are diff?

[Ej6Mike]

Gottcha so the horizontal on that I have I saw a d15 forsale and the intake looks just like my intake so it's more than likely a d15 with a d16y7 head and a stock d15 intake.. Hmmm are all the intakes and headers for a d-series all the same bolt pattern or are there some that are diff?


all 92-00 Civic Intake/exhaust manifolds, and heads/blocks for that matter have the same bolt pattern. You could take the intake manifold off of a 2000 Civic EX and put it on your 1992 civic CX. The exception is that OBD2 (96+) civics had an extra nipple or two for EVAP/EGR related lines. The bolt pattern for everything is the same.

The exception to all of this was the 96-00 Civic NON VTEC manifolds, which were a silly downdraft style manifold with the Throttle facing striaght up and the use of a 3-wire IDLE air control valve. Everything else was 2-wire.

[ROLLIN SUICIDE]

Is the extra nipple right where the intake tube bolts on because mine has one there with nothing on it and was wondering what it was for lol..

[ROLLIN SUICIDE]

I just checked again and where the motor bolts to the trans it says D16Y7 so I'm going to take it I have a d16 but what intake do I have? If it would help I can get some pics.

[kyleb215]

you probably have the stock manifold with newer engine. the y7 came with the air box on top of the manifold, and alos was found in the 96-00 civic dx and lx. if you are gonna build a track car just get rid of the non vtec d series. and as far as flow, for hondas the popular turbo right now is the precision 6262 or the garrett gt35r but the precision is a better price range to save a few dollars.

[SovXietday]

Get pictures.