View Full Version : All the wrench time I've put into my GSX
GSXbabe8
12-03-2010, 11:36 AM
Hey whats up...
I've owned my 98 GSX for almost six yrs years now. And I've done all the wrench work not a garage. This car is my baby.
This is the current and up to date list of everything done to the six bolt and so on
98 GSX
E85 converted
Six bolt block
-eagle h beam rods with je pistons
-total seal custom piston rings
-clevite 77 main/rod bearings
-arp hardware
-ARP headstuds
-Balance shaft delete
Head
-+1mm ferrea ss valves
-ferrea seals
-bronze guides
-gsc double valve springs,
-titiaium retainers,
-3g lifters
-ported by fox lake
- ARP stainless exhaust studs
-findanza cam gears
-kelford 276/272 cams
-jmf top mount double waste gate manifold
-JMF race intake with infinity 90mm tb
-PTE 6262 with a billet wheel
-FIC 1000 injectors
-HKS fuel rail with -6an fitting welded in
-dsm link V3-Speed Density
-egr block off plate
-gutted emissions
-relocated fuse box.
-ngk wide band and gage box
-autometer cobalt boost,oil, and fuel pressure gauges
-boost controller relocate inside of the car
-ABS delete
-Walbro 450 FP
-Aeromoative FPR
-Fuel lab fuel filter system with stainless steel filter
-SS -6an braided line from tank to front of car
-slowboy 3.5in short route FMIC
-ACT 2600 clucth with ACT street disc and light weight fidanza flywheel
-tial 50mm BOV
-All 4 polyurthane motor mounts
-urthane bushings in front and rear control arms and have been powdercoated black.
-Subframe and diff coated and powdercoated bolted up with billet alum. bushings.
-Front subframe bushings replaced with billet alum
This is where the journey begins with the blown up 7 bolt
The 7 bolthttp://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time/trashed7bolt.jpg
Notice how the middle of the piston is competetly missing. sorry the pic is so small.
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time/pistonrodandconetc.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time/shotpiston.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time/pistoninblock.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time/trashed75.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time/trashed74.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time/trashed72.jpg
haha imprint of the piston
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time/imprintofthepiston.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time/7oilpan.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time/messybay.jpg
GSXbabe8
12-03-2010, 11:38 AM
Six bolt
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/yayconnected.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/sixboltandtransconnect.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/sixhead2.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/clean6head.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/HKS.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/6block.jpg
GSXbabe8
12-03-2010, 11:41 AM
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/sixgoingin.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/yay.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/yay2.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/sixboltincar.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/sixincar.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/act.jpg
old 6 puck
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/oldpuck.jpg
New six puck
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/puck1.jpg
hahha me!
http://i491.photobucket.com/albums/rr278/dsmlover2/wrench%20time%202/hahhameee.jpg
GSXbabe8
12-03-2010, 11:49 AM
ok now for the updates
This is the current and new clutch/puck. My throw out barring took a crap. So we pulled the trans and discovered that the act clutch and puck was shot. And the fly wheel surface was trashed. So now I have a Clutch Masters FX 400 with a 4 puck disc and the findanza light weight fly...
The throw out barring
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/ew.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/new2.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/new3.jpg
The trans all nice and painted. haha still kickin and has 172k on it!
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/trans.jpg
The transfer case all painted and nice.. also is org. and has 172k
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/transcase.jpg
And while we at it we also did the NON ABS
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/nonabs.jpg
This is what is coming to the car once I get a head done for it. It is a fully built block. bored .20 over, JE pistons, Eagle rods, All ARP hardware. I want to get rid of the eagles and get manly TT I-beams. And get it blue printed/balanced http://i491.photobucket.com/albums/rr278/dsmlover2/updates/builtblock.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/builtblock3.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/builtblock2.jpg
GSXbabe8
12-03-2010, 11:54 AM
And this is the current bay as of today haha. Fresh crappy cell phone pics! As soon as I get the money I am planning on getting parts powder coated to give the bay that extra clean nice look.
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/9.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/8.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/6.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/1.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/7.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/4.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/untitled-3.jpg
Import Junky
12-03-2010, 12:37 PM
nice to see a girl getting dirty. you do more work on yours than i do mine. i really need a garage though. i can't do drivetrain/motor work in my parking space at a condo
GSXbabe8
12-03-2010, 12:40 PM
Thanks man. :) yes lol I am very devoted to learning and doing as much as I can. That sucks about your garage sit! lol I do all my work on the ground in the dirt hhahah! I have a garage out back but its not like big enough to do the work inside. And not lit up enough. So if it rains or snows and something happens im stuck doing it in the mud lol. Why don't you rent a garage?
GSXbabe8
12-03-2010, 12:52 PM
Where the fuse box is relocated to...
http://i491.photobucket.com/albums/rr278/dsmlover2/updates/Photo07142324.jpg
Spininall4s
12-03-2010, 02:56 PM
showing some dsm love ....how much boost are you running?
GSXbabe8
12-03-2010, 03:23 PM
=) Thanks haha. Right now 22psi. Once I get bigger injectors 25-27
Import Junky
12-03-2010, 03:44 PM
don't have a garage close enough to bother with. Don't get me wrong, I've replaced two turbo setups, done exhaust swaps, suspension installs...etc. All in my parking space. Just not motor builds..haha. The stuff i'm doing now is already against assocation rules. i get in trouble all the time for working on my car.
s3xrapt0r
12-03-2010, 04:28 PM
nice man !! im likin it ! alot of work went into it ! glad to see a dsm done with care !
GSXbabe8
12-03-2010, 05:14 PM
don't have a garage close enough to bother with. Don't get me wrong, I've replaced two turbo setups, done exhaust swaps, suspension installs...etc. All in my parking space. Just not motor builds..haha. The stuff i'm doing now is already against assocation rules. i get in trouble all the time for working on my car.
hhaha yeah! well believe me we've gotten in trouble with the landlord here for working on our cars "late at night" lol. I don't care about the neighbors I care about getting my car done lol. And it was on a weekend haha! Oh well let them bitch lol. I guess. I mean I guess you could get kinda kicked out lol and that would suck. But hey.
nice man !! im likin it ! alot of work went into it ! glad to see a dsm done with care !
lol girl haha im a girl. And thank you. Yep Im VERY anal about my 2g. It gets taken care of well. Im glad you like it :)
Elliott18t
12-03-2010, 05:18 PM
haha i was gonna be like, "dude, why are you wearing nailpolish" ... then i saw GSXbabe8
GSXbabe8
12-03-2010, 05:25 PM
haha yep! im a girl lol. And also how it says up above... "along with my man" haha. Ive put a lot of hard work and time into this car and I plan on continuing. And I will post everything that gets done to the car up then. Just being unemployed right now is really slowing me down from doing everything else I plan to do.
itwillboost
12-06-2010, 02:49 AM
Thanks man. :) yes lol I am very devoted to learning and doing as much as I can. That sucks about your garage sit! lol I do all my work on the ground in the dirt hhahah! I have a garage out back but its not like big enough to do the work inside. And not lit up enough. So if it rains or snows and something happens im stuck doing it in the mud lol. Why don't you rent a garage?
Looks good and I gotta respect anyone else who works out it the cold and the **** weather.
Wow that's a nice crack on that piston. These DSMs bring back painful yet pleasant memories. Good move on ditching the ebay turbo, it can only be a crap car if you put crap in it.
GSXbabe8
12-07-2010, 07:00 PM
Looks good and I gotta respect anyone else who works out it the cold and the **** weather.
Yeah it really sucks dude. lol. Latley though I haven't had to fix anything. And when a DSM isn't acting up lol thats scary. Cos your wondering what its plotting haaha!
Wow that's a nice crack on that piston. These DSMs bring back painful yet pleasant memories. Good move on ditching the ebay turbo, it can only be a crap car if you put crap in it.
lol well the kid who I bought the car off of back in 2008 had the 16g on it. ha so I ran it until it blew. I don't like anything ebay. Its junk. Yes painful in deed lol. Painful to the wallet/purse lol! But they are fun cars when they work lol. I have a lot of plans for it. Hopefully soon I will get hired some where and can continue ordering parts for a head build for my built block. =)
assault187
12-07-2010, 10:01 PM
Why the 4 puck?
GSXbabe8
12-07-2010, 11:32 PM
b/c I didn't have a choice in the matter if I went with puck or street disc. My boyfriend pulled the clutch and puck out of his 1g for my 2g when my throwout barring went. I don't have a job so I don't have money to buy the street disc. Do I like that I have a puck.. no. but for right now its guna have to do. =/
lol Nick do you even know who this is? haha.
94integra
12-08-2010, 12:29 AM
That frontend looks sick. Any guess on how much power ur making?
GSXbabe8
12-08-2010, 12:31 AM
No clue. Haven't dynoed. I'd say prob around 350 or so. And thank you. :) Whenever I get a job and money im plannin on getting 1000cc injectors or higher and tuning for 25-27psi. Hopefully ill be able to dyno and get numbers. Hard to find decent priced AWD dynos though.
94integra
12-08-2010, 12:43 AM
Good luck on the build. Its nice to see a female into cars. If you see the car in the avatar or the one below around say wassup lol
http://i151.photobucket.com/albums/s123/axel17602/100_3911.jpg
GSXbabe8
12-08-2010, 01:01 AM
Alright haha. Thank you. I can't wait to get a job again soI can continue on odering parts for a built head! I love everything about cars. I love ripping them apart. Building them. Putting them back together. Everything! haha. I love learning more about them too! I usually am up at that Rutters in York in the summer as well. If you go up there. But if you see me just say hey haha. If you pass me just wave. I may not wave back right away b/c usually my reaction is delayed cos I'm trying to see who it is lol. So don't get put off if I don't wave back the first time haha.
GSXbabe8
10-30-2011, 02:25 PM
**Update** So I cleaned up the engine bay A LOT! Re did the lip of my wheels purple. And just bought a set of FIC 1000cc injectors and am hopefully soon retuning for 26psi from 22psi.
http://i491.photobucket.com/albums/rr278/dsmlover2/320532_265591523482752_147994755242430_723929_9710 66520_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/297992_1577535694980_1733250393_805980_1379231972_ n.jpg
Foolinaround
10-30-2011, 03:04 PM
I love 2gb gsx's. Any sound clips?
GSXbabe8
10-30-2011, 03:46 PM
thanks. I have a video... I personally like this one cos I think the down shift in the end sounds sick
http://s491.photobucket.com/albums/rr278/dsmlover2/?action=view¤t=004-1.mp4
clipse97
01-22-2012, 06:50 PM
What all are you getting done to your head? You should put a cyclone intake manifold on it too, i know there kinda hard to find though
DsmRob
01-22-2012, 07:01 PM
Looks good, I have a cyclone if your interested.
GSXbabe8
01-22-2012, 07:21 PM
No thanks. I just picked up a Magnus intake. Thanks tho rob.
GSXbabe8
01-22-2012, 07:30 PM
What all are you getting done to your head? You should put a cyclone intake manifold on it too, i know there kinda hard to find though
well I want to sell the HKS 264/272s for kelford 272s, double valve springs, upgraded everything. And Im not a fan of the clyclones. Id much rather have my mangus intake with the accufab. :wink::wink:
sillyeye
01-22-2012, 08:02 PM
Props to you, not just because your a female, but because your car is nice.
GSXbabe8
01-22-2012, 08:17 PM
aw thank you! I appericate that! Check out the videos I posted. Sounds soo sexy! haha!
DsmRob
01-22-2012, 08:27 PM
well I want to sell the HKS 264/272s for kelford 272s, double valve springs, upgraded everything. And Im not a fan of the clyclones. Id much rather have my mangus intake with the accufab. :wink::wink:
Lmk how much you would want for the 264/272 cams, my buddy is looking for a set.
GSXbabe8
01-22-2012, 08:30 PM
alright. well I believe I still have your number. Wont be for a while til I get a job here.
GSXbabe8
01-25-2012, 02:46 PM
so as soon as I get done with everything I'll take a new bay shot. But I've powder coated my valve cover last night and it turned out great! Awesome purple!!! [/COLOR]
http://i491.photobucket.com/albums/rr278/dsmlover2/409145_1813508874162_1733250393_904839_982938545_n .jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/purple.jpg
GSXbabe8
05-11-2012, 09:01 PM
Well time to update the journal! lol. LOTS of new things goin on! Went Speed Density. Got a magnus street intake, FP manifold, ditched the Apexi n1 and went with HEPerformance custom 3inch straight pipe-V-banded to the megan 3in down pipe. Re-did the entire bay. lol now for the pics..
Being torn down for powdercoat (I did all my own powdercoating work in my basement)
http://i491.photobucket.com/albums/rr278/dsmlover2/5-1.jpg
Me putting the magnus on
http://i491.photobucket.com/albums/rr278/dsmlover2/6-1.jpg
FP mani on
http://i491.photobucket.com/albums/rr278/dsmlover2/2-1.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/1-1.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/8-1.jpg
The 1000ccs and powdercoated fuel rail
http://i491.photobucket.com/albums/rr278/dsmlover2/9.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/7-1.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/12.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/11.jpg
SPEED DENSITY
http://i491.photobucket.com/albums/rr278/dsmlover2/13.jpg
New IC piping
http://i491.photobucket.com/albums/rr278/dsmlover2/16.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/14.jpg
Straight pipe!
http://i491.photobucket.com/albums/rr278/dsmlover2/17.jpg
And lastley.. New wheels are going on the car once I sand blast and powdercoat them. Gun metal spokes and a candy purple lip. Theyre konig Traffixs. And a 3000gt vr4 break upgrade is going on. Am using an 13in SVT corba rotor for this. Reason being it sets back in farther and allows more clearance for the wheel.
http://i491.photobucket.com/albums/rr278/dsmlover2/w.jpg
Alien Visitor
05-11-2012, 10:16 PM
Nice job! I always liked the 2Gs.
GSXbabe8
05-11-2012, 10:21 PM
Thanks =)
acpstunts
05-13-2012, 07:05 PM
what color purple exactly is that you used too powder coat the cover and where did you get it from?
GSXbabe8
05-14-2012, 12:41 AM
Phazer purple. Powderbuythepound.com. why?
Jeff822
05-14-2012, 01:47 AM
Very nice 2g and build. I miss my 2g haha. Good luck with everything
GSXbabe8
05-14-2012, 02:43 PM
Very nice 2g and build. I miss my 2g haha. Good luck with everything
Thank you. My next goals are besides the wheels and break upgrade is to get those manly tt i-beams and the block balanced. Then get a head goin. I would like to run the kelford 272s. I like them a lot.
denmah
05-14-2012, 03:47 PM
i like your workspace
GSXbabe8
05-14-2012, 06:51 PM
Lol whys that?
GSXbabe8
05-14-2012, 07:01 PM
http://i491.photobucket.com/albums/rr278/dsmlover2/h.jpg
acpstunts
05-14-2012, 07:04 PM
because I'm looking to do a set of wheels with a similar finish if not that exact purple.
GSXbabe8
05-14-2012, 07:06 PM
ohh ok. Well you need a mirror black base coat then the phazer purple. I can do up to 17in wheels
rocafellafw
05-15-2012, 12:30 AM
Very nice 2g, great choice on all the parts..super clean
denmah
05-15-2012, 03:45 AM
Lol whys that?
ive done motor swaps and built turbo kits in a driveway in the mud, and the rain, at night, i know where you are coming from.
GSXbabe8
05-15-2012, 02:04 PM
Very nice 2g, great choice on all the parts..super clean
Thanks man!
GSXbabe8
05-15-2012, 02:06 PM
ive done motor swaps and built turbo kits in a driveway in the mud, and the rain, at night, i know where you are coming from.
Lol I feel your a real motor head when you've done it in the dirt, snow, rain. Ive torn it apart while being deathly sick. I have a lot of ambish. haha. I went 16 hours straight.. no eatting, drinking, nothin powder coating all those parts cos I wanted to get it done. haha. I felt weird after I got done cos of the lack of food. I was on a get it done NOW track.
denmah
05-15-2012, 02:23 PM
we call it workin like a piece of ****
http://img.photobucket.com/albums/v479/denmah/cars/fairmont/IMG_20120121_161747.jpg
http://img.photobucket.com/albums/v479/denmah/IMG_20111019_193603.jpg
http://img.photobucket.com/albums/v479/denmah/IMG_20111014_225945-1.jpg
GSXbabe8
05-15-2012, 05:07 PM
lol thats awesome. Thats what my work area basically looks like.
denmah
05-17-2012, 02:05 AM
lol thats awesome. Thats what my work area basically looks like.
:inlove:
PAFirefighter11
05-17-2012, 05:00 PM
http://i491.photobucket.com/albums/rr278/dsmlover2/untitled-3.jpg
Safe Harbor? :) I love that area!
GSXbabe8
05-17-2012, 06:31 PM
Yup! Safe Harbor! Good place for photos!!!
GSXbabe8
05-17-2012, 06:32 PM
:inlove:
Lol ive done it all man. Snow, rain, changed an axel out with a tornado warning and winds coming fron the bowels of hell. Ya know lol just another day. Im excited to get these new wheels goin with the break upgrade!
GSXbabe8
07-09-2012, 12:23 PM
*update*
So my 30r took a ****. Now I went holset. I have a holset hx 35. I upgraded my Magnus street intake with a jmf race intake with the Q45 throttle body.
Im pretty happy with the setup thus far.
Here's a recent shot of the bay.
http://i491.photobucket.com/albums/rr278/dsmlover2/IMAG1637-1-1.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/IMAG1659-1.jpg
GSXbabe8
07-09-2012, 12:41 PM
I had to re do the hoses from the heater core to the water pipe and such due to the Q45. cos at full throttle the lines would get smacked. and had to cut and re weld the break canister bracket over some due to it was hitting the intake.
GSXbabe8
02-21-2013, 08:55 PM
Update!
http://i491.photobucket.com/albums/rr278/dsmlover2/530618_2465719579022_981789521_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/302717_2520900878520_446810697_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/406842_2520963040074_880058095_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/20388_2520968760217_1930886197_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/486286_2520997280930_302958190_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/154394_2520974800368_1833716685_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/63143_2521149204728_2048661418_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/556792_2532031836787_1422601692_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/399324_2565446792140_119238446_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/319609_2567773010294_1406197559_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/401747_2569919583957_1904361268_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/548729_2592343304536_743627827_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/425577_2582585020585_4004722_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/531992_2584935159337_788727336_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/63243_2600440746967_1518757296_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/430888_2600448467160_1390334828_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/167425_2600572870270_1946789716_n.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/148967_2604760054947_1495711300_n-1.jpg
http://i491.photobucket.com/albums/rr278/dsmlover2/380649_2604823536534_800054608_n.jpg
Spawne32
02-22-2013, 03:10 AM
Lookin good, hows it ride with those solid and urethane bushings?
GSXbabe8
02-22-2013, 06:27 AM
Driving wise I don't really notice much. Handling wise is a lot better. Launches will be a lot better lol haven't done one yet. The only thing I really notice is if in a low rpm since its 5sp and if I'm going too slow for the gear it vibrates loudly. Some tines I can hear the rear end whine on the highway lol. Other wise it's great. This spring I'm doing the front.
GSXbabe8
07-19-2013, 11:48 PM
updates
replaced diff for lower milage one. powdercoated it as well. all new seals.
http://i491.photobucket.com/albums/rr278/dsmlover2/1017682_3208135058945_508044439_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/1017682_3208135058945_508044439_n.jpg.html)
yoke replacement kit
http://i491.photobucket.com/albums/rr278/dsmlover2/255028_3208960519581_104645800_n-Copy.jpg (http://s491.photobucket.com/user/dsmlover2/media/255028_3208960519581_104645800_n-Copy.jpg.html)
e85 converted!
walbro 450
http://i491.photobucket.com/albums/rr278/dsmlover2/577717_3030961269711_1733002111_n-Copy.jpg (http://s491.photobucket.com/user/dsmlover2/media/577717_3030961269711_1733002111_n-Copy.jpg.html)
new turbo
holset hx35 7 blade.
http://i491.photobucket.com/albums/rr278/dsmlover2/404660_3004074117549_245404358_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/404660_3004074117549_245404358_n.jpg.html)
ngk wideband system
http://i491.photobucket.com/albums/rr278/dsmlover2/525225_2948176160135_1126418379_n-1.jpg (http://s491.photobucket.com/user/dsmlover2/media/525225_2948176160135_1126418379_n-1.jpg.html)
fuel lab fuel filter
http://i491.photobucket.com/albums/rr278/dsmlover2/75547_2846516698712_1227411266_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/75547_2846516698712_1227411266_n.jpg.html)
http://i491.photobucket.com/albums/rr278/dsmlover2/156531_2951851292011_1072593308_n-1.jpg (http://s491.photobucket.com/user/dsmlover2/media/156531_2951851292011_1072593308_n-1.jpg.html)
new wheels
http://i491.photobucket.com/albums/rr278/dsmlover2/969921_3049331488955_618430783_n-Copy-Copy.jpg (http://s491.photobucket.com/user/dsmlover2/media/969921_3049331488955_618430783_n-Copy-Copy.jpg.html)
http://i491.photobucket.com/albums/rr278/dsmlover2/942982_3049493653009_1373405058_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/942982_3049493653009_1373405058_n.jpg.html)
http://i491.photobucket.com/albums/rr278/dsmlover2/969708_3095581645180_153600276_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/969708_3095581645180_153600276_n.jpg.html)
mr_eh
07-20-2013, 12:55 AM
ngk afx? i miss mine, also *fist bump* fellow sparkle powdercoated wheel owner... the best thing about sparkle in the powdercoat is they hide nicks and imperfections. Nice car!
Foolinaround
07-20-2013, 10:26 AM
best 2g body style. car looks great
GSXbabe8
07-20-2013, 11:01 AM
ngk afx? i miss mine, also *fist bump* fellow sparkle powdercoated wheel owner... the best thing about sparkle in the powdercoat is they hide nicks and imperfections. Nice car!
Right on man! *fist bump* Thank you! :) And yes the ngk afx!
GSXbabe8
07-20-2013, 11:02 AM
best 2g body style. car looks great
Thank ya! :wiggle:
stover
07-21-2013, 10:19 AM
how did you like the 6152? i just picked one up for my 1g, congrats on coming so far with the car, i plan to do all the bushings in my 1g when i have the funds/time
GSXbabe8
07-21-2013, 12:08 PM
how did you like the 6152? i just picked one up for my 1g, congrats on coming so far with the car, i plan to do all the bushings in my 1g when i have the funds/time
It was ok. Laggy though. The bushings are deff worth it! Its a whole new animal. lol. I did the fronts as well. And went with a 17x5 wheel with a 235/40 seires tire. And ill tell ya what...the handling is damn amazing! :finga:
92awdtsi
07-21-2013, 09:04 PM
Car looks great! Now you just need some track times
stover
07-22-2013, 08:42 AM
It was ok. Laggy though. The bushings are deff worth it! Its a whole new animal. lol. I did the fronts as well. And went with a 17x5 wheel with a 235/40 seires tire. And ill tell ya what...the handling is damn amazing! :finga:
awesome, im going with a t3 .63 housing and its ball bearing so hopefully it doesnt lag too much, i ran a holset before though so im used to it, and yea id love to make mine handle a little better , bushings def need to be done
GSXbabe8
07-22-2013, 04:38 PM
awesome, im going with a t3 .63 housing and its ball bearing so hopefully it doesnt lag too much, i ran a holset before though so im used to it, and yea id love to make mine handle a little better , bushings def need to be done
ah see i had the dsm bolt up for mine. And mine was as well ball barring. Blew up cause of a small peice of dirt some how getting into the feed line. Was choaking the turbo of any oil. BOOM. lol that was it. And my holset isnt at all laggy. And i even have the dsm bolt up housing as well. Plan to go to the t3 setup tho. Twin scroll.
97TurboDSM
07-22-2013, 08:49 PM
this things finally done?
GSXbabe8
07-23-2013, 04:55 PM
this things finally done?
lmao done. Yea right. Its far from done. Its done for now. Til i get the built motor done thats chillen in the house.
GSXbabe8
06-10-2014, 01:57 PM
Well time for more updates. Six bolt of 5 yrs in my ownership died back in december. I am doing a full build. Want it to still stay streetable though.
And the boys say that a women belong in the kitchen...fine..the kitchen is now the garage lol
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/kitchen.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/kitchen.jpg.html)
JE/Eagle
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/sex.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/sex.jpg.html)
GSXbabe8
06-10-2014, 01:59 PM
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/bearings.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/bearings.jpg.html)
pte 6262 with billet wheel
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/6262.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/6262.jpg.html)
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/62626.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/62626.jpg.html)
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/mani2-1.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/mani2-1.jpg.html)
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/mani1.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/mani1.jpg.html)
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/jmf.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/jmf.jpg.html)
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/mountedup.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/mountedup.jpg.html)
GSXbabe8
06-10-2014, 02:03 PM
My nice modded fuel rail
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/fuelrail.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/fuelrail.jpg.html)
New valve cover
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/vcc.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/vcc.jpg.html)
GSXbabe8
06-10-2014, 02:05 PM
To follow up with how the rear subframe has the soild billet bushings, well now so do the front.
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/burn-1.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/burn-1.jpg.html)
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/b2.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/b2.jpg.html)
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/bushing.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/bushing.jpg.html)
GSXbabe8
06-10-2014, 02:09 PM
Out with the old and in with the new.
http://i491.photobucket.com/albums/rr278/dsmlover2/build%202014/oldnew.jpg (http://s491.photobucket.com/user/dsmlover2/media/build%202014/oldnew.jpg.html)
I still have a lot to do. But I am so proud of how far i've come and how much i've accomplished.
GSXbabe8
06-10-2014, 02:15 PM
I plan to upgrade to FIC 1800cc injectors. I have yet to get my kelford 276/272 cams. And run the stainless steal fuel line from tank up.
GSXbabe8
07-19-2014, 09:51 PM
http://i491.photobucket.com/albums/rr278/dsmlover2/10487301_4263039030885_4168355760207182339_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/10487301_4263039030885_4168355760207182339_n.jpg.h tml)
http://i491.photobucket.com/albums/rr278/dsmlover2/10407173_4269808840126_6449412823256722206_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/10407173_4269808840126_6449412823256722206_n.jpg.h tml)
http://i491.photobucket.com/albums/rr278/dsmlover2/1907694_4261247786105_1466802892434255036_n1.jpg (http://s491.photobucket.com/user/dsmlover2/media/1907694_4261247786105_1466802892434255036_n1.jpg.h tml)
http://i491.photobucket.com/albums/rr278/dsmlover2/10371892_4261247546099_7355404195287228670_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/10371892_4261247546099_7355404195287228670_n.jpg.h tml)
http://i491.photobucket.com/albums/rr278/dsmlover2/10386739_4319423080451_830423648697704335_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/10386739_4319423080451_830423648697704335_n.jpg.ht ml)
http://i491.photobucket.com/albums/rr278/dsmlover2/10488161_4322981529410_5383384699881731696_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/10488161_4322981529410_5383384699881731696_n.jpg.h tml)
http://i491.photobucket.com/albums/rr278/dsmlover2/10411923_4270185489542_7911204407989517762_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/10411923_4270185489542_7911204407989517762_n.jpg.h tml)
http://i491.photobucket.com/albums/rr278/dsmlover2/10478554_4334463816460_7329017436806969542_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/10478554_4334463816460_7329017436806969542_n.jpg.h tml)
http://i491.photobucket.com/albums/rr278/dsmlover2/10550938_4334464776484_6032580690422607060_n.jpg (http://s491.photobucket.com/user/dsmlover2/media/10550938_4334464776484_6032580690422607060_n.jpg.h tml)
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.