sammy c's silvia vert build thread?

[fightinchunk]

[insert gay intro here]blah blah blah i like cars blah drift blah everyone hates 240's blah blah **** you all.... ****s gonna be nuts...

how she stood when i bought her. 1100 bucks. clean with a tiny bit of rust that was taken care of by frank down at pride performance. welded on a sectioned off coupe quarter panel, frame rails were reinforced and strut towers taken care of.
http://farm3.static.flickr.com/2605/4033281993_72d651b1bd_b.jpg

http://farm3.static.flickr.com/2632/4034036854_1e53f9a85f_b.jpg

poopy ka out
http://hphotos-snc3.fbcdn.net/hs430.snc3/24790_662456799229_12802416_37438307_7913879_n.jpg

if you see anything you like in this pic , let me know
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs430.snc3/24790_662457677469_12802416_37438310_4581668_n.jpg


time to find an sr... found the perfect setup from antony(auk113123445345). went down and interrupted a cool little meet in the cave. btw pa scene>jersey. comin back from anthony's place with a one-off srswapped midengine kia sedona
http://hphotos-snc3.fbcdn.net/hs458.snc3/26171_663884078949_12802416_37478410_622406_n.jpg

then i said **** it, i'm swapping my newly acquired ariston 2jzgte into the vert muahahahahah
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs326.ash1/28453_672538789839_12802416_37757482_5127384_n.jpg
.
.
.
.
.
.
.
.
i kid... it's for the sc300. neway

found a silvia whole front end swap, metal unmolested fenders, trip proj, everything from two kids from pa(again thank you pa) with r32 gtr's. kool ass mofo's. shout out to andrew from levittown
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs294.snc3/28353_674341462269_12802416_37815840_5000124_n.jpg

rps stage 2 clutch in and ready for trans thanks to mvp motorsports
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs061.ash2/36400_682414598639_12802416_38128467_7060327_n.jpg
http://farm5.static.flickr.com/4092/4843093481_562209ab34_z.jpg

my boy brian helpin me with the swap... couldn't do it without him. thanks bud
http://farm5.static.flickr.com/4153/4843387417_410f3cdff9_z.jpg
http://www.flickr.com/photos/fightinchunk/4843387701/

had to cut the old pos motormounts off... stripped them ****s taking the ka out
http://farm5.static.flickr.com/4129/4843120935_3ee0aaa48d_b.jpg

god damn puerto ricans...
http://farm5.static.flickr.com/4125/4843121125_80e0bb6448_b.jpg

red rocket? me hope so bery much
http://farm5.static.flickr.com/4128/4843123049_b282132460_b.jpg

installation of man pedal
http://farm5.static.flickr.com/4104/4843092653_f066dbe865_b.jpg
http://farm5.static.flickr.com/4127/4843093233_069b1b63d1_b.jpg

don't worry... i cut the brake pedal down a bit
http://farm5.static.flickr.com/4106/4843707970_391a368daf_b.jpg

engine bay clean and motor clean... ready for it's final resting place
http://farm5.static.flickr.com/4154/4843121327_db8354998d_b.jpg

http://farm5.static.flickr.com/4150/4843121545_2654f27808_b.jpg

http://farm5.static.flickr.com/4128/4843736684_0abbb795d6_b.jpg

http://farm5.static.flickr.com/4084/4843122133_2c7894ef90_b.jpg

http://farm5.static.flickr.com/4085/4843736424_c79fd220c8_b.jpg

****kkkkk i should probably have changed the oil filter...
http://farm5.static.flickr.com/4107/4843122371_4c3f5ff576_b.jpg


home sweet home
http://farm5.static.flickr.com/4107/4843737612_9042bff13d_b.jpg

hey ant... i just want to confirm that you can work with these two sensors... they look ****ed up beyond recognition so I was thinking or ordering these two anyway... 5th gear switch and 4th gear switch respectively?
http://farm5.static.flickr.com/4084/4843738692_fe61b94dac_b.jpg

second switch closest to neutral pos switch
http://farm5.static.flickr.com/4147/4843123323_cd9769952d_b.jpg

and the next switch after that going towards bellhousing from neutral pos switch
http://farm5.static.flickr.com/4087/4843123683_97122481b9_b.jpg

that's it so far... just need to pick up the rest of the pieces from antony and then the wiring of the power fc shall commence.
http://farm5.static.flickr.com/4152/4843124357_cbfb884501_b.jpg

[DriftNasty180sx]

still got that ka? i want it

[fightinchunk]

kind of a long story but for all intents and purposes... yeah i still got it.

[DriftNasty180sx]

well let me know cuz i love me some KAs...collecting them is a hobby of mine :)

[thefro526]

The messed up sensor on the rear of the trans is the vehicle speed sensor.

[auk113]

yea man i don't know how it happened but you deff need a speed sensor. s13 DOHC 5sd will work just fine. also i would get the reverse sensor as well. Looks like wires for torn out during transport.

[fightinchunk]

I think i ****ed it up trying to fit the engine in using the jack when i used to to angle the engine in right.

besides that tho... do I need any other sensors?

[auk113]

Hey Sam how is it going? Just wanted to check in on you, see how you were making out with this car. Your stuff is ready; just let me know when you want to get together...

[Qwibby]

looks good! I will def be checking back, very interested

[Lucky]

sick build!

[fightinchunk]

so I got those old school 4 lug weds autobahns on and they look pretty good, fitment will be just right with alittle roll/pull
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs321.ash2/60182_701775404429_12802416_38729649_133285_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs679.snc4/61894_701775848539_12802416_38729651_834421_n.jpg

but i got these waiting for me as soon as I get all my 5lug stuff.
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs156.ash2/41138_695387146549_12802416_38560841_1026284_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs431.snc4/47395_695388354129_12802416_38560885_3158710_n.jpg

[fightinchunk]

Update:
Car went down to antony(auk113) to get the finishing touches done to the car and I am quite honestly speechless. There is not enough I can say about the guy, he is absolutely one of the best s chassis authorities I know in the tristate area without a doubt. The swap was finished soooo cleanly and I was just floored with not only how it looked, but also with how the car ran. He will be the only person besides vince at RT that will be touching this car. completely above and beyond... just fantastic. 100 times out of 100 I would recommend antony to anything s chassis related.

will get pics once I get her all washed. gonna cash in on a favor and get her resprayed and then off to vince to get tuned!

[Spocknasty]

I worked in his garage while he wrenched on your car and I can definitely vouch for Antonys knowledge and skill.

[92accordex]

Awesome dude, I always wanted a vert so badd

[fightinchunk]

got the car tuned @ rttuning. 370whp 333tq
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/279331_10100308242266949_1320616789_o.jpg

all the dudes at RT are ****ing awesome. can't say enough about these dudes. Huge thanks to vince, antony, will, eric and james. can't wait to get my legacy tuned by andy!

[fightinchunk]

car finally lowered with springs... coils going on soon. I was spotted at h20 tryin to take pics of other cars.

http://i26.photobucket.com/albums/c139/bigprfed/H2oi%202012/IMG_3625.jpg
Soon:
Coils, bigger non ****ty injectors, retune, satin red paint, 5lug/wheels/tires/blah blah blah

[auk113]

850cc too small?

[XxaltezzaxX]

Stfu Sam.

[fightinchunk]

850cc too small?

yeah he didn't like PE. going with fic1100 injectors and e85 in the very close future

[dudewheresmycar]

nice lol

http://www.youtube.com/watch?v=acgZNEKiYfc

[Kgmdawg84]

god this car sucks

[fightinchunk]

god this car sucks

hi kenny!

[fightinchunk]

nice lol

http://www.youtube.com/watch?v=acgZNEKiYfc

haha yeah that's us like 40 seconds in

[Bacon]

Sammmmm!!!!!!!!!!