View Full Version : 2004 **** show race busa
denmah
07-22-2010, 04:32 AM
ive been wanting to do something like this for a while.
many thanks to steve(Goddabob)
picked her up like this 5th of july
http://img.photobucket.com/albums/v479/denmah/730de82c.jpg
http://img.photobucket.com/albums/v479/denmah/busar/busar1.jpg
http://img.photobucket.com/albums/v479/denmah/busar/busar2.jpg
in the garage
http://img.photobucket.com/albums/v479/denmah/busar/busa2.jpg
http://img.photobucket.com/albums/v479/denmah/busar/busa7.jpg
http://img.photobucket.com/albums/v479/denmah/busar/busa17.jpg
teardown
http://img.photobucket.com/albums/v479/denmah/busar/0507101.jpg
not bad eh?
http://img.photobucket.com/albums/v479/denmah/busar/05071012.jpg
http://img.photobucket.com/albums/v479/denmah/busar/0507108.jpg
picked up another frame
http://img.photobucket.com/albums/v479/denmah/busar/07071001.jpg
stuff
http://img.photobucket.com/albums/v479/denmah/busar/07071005.jpg
http://img.photobucket.com/albums/v479/denmah/busar/07071004.jpg
started moving everything over.
http://img.photobucket.com/albums/v479/denmah/busar/2010-07-07194502.jpg
http://img.photobucket.com/albums/v479/denmah/busar/2010-07-07232133.jpg
billet goodies day
http://img.photobucket.com/albums/v479/denmah/busar/1photo.jpg
http://img.photobucket.com/albums/v479/denmah/busar/2photo.jpg
http://img.photobucket.com/albums/v479/denmah/busar/3photo.jpg
http://img.photobucket.com/albums/v479/denmah/busar/4photo.jpg
http://img.photobucket.com/albums/v479/denmah/busar/5photo.jpg
made a nice on off switch for the ignition since mine is destoryed and keys dont exist.
http://img.photobucket.com/albums/v479/denmah/busar/7-18-10ghettoignition.jpg
picked up some drag forks for the front end and threw them in
http://img.photobucket.com/albums/v479/denmah/busar/21071001.jpg
http://img.photobucket.com/albums/v479/denmah/busar/21071006.jpg
getting there fast!
Seven
07-22-2010, 04:34 AM
down n out
AMF Racing
07-22-2010, 04:37 AM
gigity. ima pilot that bitch one day, oh yes.......
denmah
07-22-2010, 04:38 AM
gigity. ima pilot that bitch one day, oh yes.......
hell yeah, ill meet you at atco.
full bottle
just for you
AMF Racing
07-22-2010, 04:41 AM
only if i can wear your leathers, no homo......
g0dzuki
07-22-2010, 05:05 AM
fun fun fun
phsdrummer2
07-22-2010, 06:26 AM
nice project. Nice to see a bike come back from the dead like that.
Subscribed for the finished product!
liquiddevil2000
07-22-2010, 07:13 AM
i did a project like that once and it ended becoming more expensive then if i wouldve just bought a working bike off craigslist or ebay and tweaking from there..
denmah
07-22-2010, 07:45 AM
i did a project like that once and it ended becoming more expensive then if i wouldve just bought a working bike off craigslist or ebay and tweaking from there..
i should be going 8s for less than 2k :supz:
Goddabob
07-22-2010, 11:21 AM
How much trouble was getting the busa off the truck?
sobigsofly
07-22-2010, 11:37 AM
so this will be used strickly for drag?
denmah
07-22-2010, 02:15 PM
How much trouble was getting the busa off the truck?
not too bad, used a piece of plywood and screwed two ramps together, loosened the forks, pulled them all teh way down, so the front end had room and we walked it back off. took 3 of us to keep it under control the front end was so ****ed and sloppy it wanted to fall and go in every direction but strait
denmah
07-22-2010, 02:16 PM
so this will be used strickly for drag?
yes not street legal, drag racing only
SoStock92
07-22-2010, 02:34 PM
Whys it not street legal?
I always wanted to buy a beat up busa, fix it, and turbo the crap out of meticulously, and just put it my family room or something lol
Vr-4-Life
07-22-2010, 02:45 PM
nice man... id get a keyed ignition if you could... wouldnt want it stolen...
also... what did you pick her up for?
Honest_Bob
07-22-2010, 04:04 PM
I dont care about the busa. Need more pics of that sweet sweet van. :inlove:
denmah
07-22-2010, 05:09 PM
Whys it not street legal?
I always wanted to buy a beat up busa, fix it, and turbo the crap out of meticulously, and just put it my family room or something lol
its not registered, has no vin, will have no headlights, tail lights, blinkers, etc etc
nice man... id get a keyed ignition if you could... wouldnt want it stolen...
also... what did you pick her up for?
its only going to go from my garage to the racetrack.
SoStock92
07-22-2010, 05:27 PM
Oh ok - but it could be street legal with some tweaks
Seven
07-22-2010, 06:38 PM
I dont care about the busa. Need more pics of that sweet sweet van. :inlove:
That van will rape your dog and entire family :p
Oh ok - but it could be street legal with some tweaks
Right but (I think I can speak for Matt here)... Knowing Matt, if her WERE to ride this bike on the street... bad things would happen. Police, death, child porn, etc.
Not to mention .. he has an 08 B-King to ride on the street. ;)
tomustang
07-22-2010, 06:50 PM
Better take out a huge insurance policy after you're done :)
denmah
08-06-2010, 12:05 AM
gutted the thermostat, installed the 2 new sprockets, installed the clutch, speed sensor etc, bled the clutch, bled the front brakes, bled the rear brakes, and installed the chain, i need a chain riveter or i will just buy a clip in master link for the damn thing lol.
new sprockets
2 down 3 up
http://img.photobucket.com/albums/v479/denmah/busar/754d8f18.jpg
gutted t-stat
http://img.photobucket.com/albums/v479/denmah/busar/d60c7f25.jpg
installing rear sprocket
http://img.photobucket.com/albums/v479/denmah/busar/e4ba3709.jpg
closeup
http://img.photobucket.com/albums/v479/denmah/busar/d838ae34.jpg
improv rear stand lol
http://img.photobucket.com/albums/v479/denmah/busar/0c26a208.jpg
feels good to finally have some feeling behind the levers, they have been dead for so long
93EGY8
08-06-2010, 11:51 AM
this thing is gonna be naassttyyyyy!!
denmah
08-09-2010, 05:22 AM
ok, couldnt sleep after working on coreys truck all night, got up, went to the garage...
used the 10 dollar harbor freight chain rivet tool, and it ****ing worked great, i would recommend it to anyone, you have to have some patience to get everything in the way you want, and then get it done. so after that i adjusted the chain. going to raise the back end of the bike a tiny bit on teh links, one or two more, till i can cut up the box on the back of the swingarm and etc.
filled the bike with water, installed the shift linkage rearset and bent back all the stock parts for the shift linkage and got it all working great actually hahha. re-ran all the wiring in the front end, used teh factory zip ties and etc. mounted the front end fuse box. gutted the stock air box to the Big airbox mod. threw filter in the garbage, mounted the stock tank, connected all the fuel lines etc.
fitted the stock overflow tank, filled the front tire with air (it looses air somehow) im sure i did some other small things im forgetting...
http://img.photobucket.com/albums/v479/denmah/busar/8d435c35.jpg
http://img.photobucket.com/albums/v479/denmah/busar/d1341f9e.jpg
Goddabob
08-09-2010, 12:36 PM
Almost there looking good.
JDMmuscle
08-09-2010, 05:23 PM
Mucho respect my friend, I LOVE me some bike. but this was always alien territory for me.
Looks great so far man, what color scheme are you going with?
denmah
08-10-2010, 01:36 AM
not sure what i will do bodywork or color yet.
fired it up today, the switch i made instead of the key, actually burned out, took me a while of playing with the wires to figure it out. threw on another switch and wham she turns on and comes to life no problem.
ill grab video of it tomorrow
denmah
08-10-2010, 05:41 PM
fired it up and did a nice burnout, neighboor came out and cheered me on. lol
needs a tune bad though, all the breather mods the bike is lean and stalls out after the burnout and after a hard throttle blip.
so next on the list is trim more of the rear plastics, get the front of the tank fixed so i can bolt it down, and fix teh front tire and rim because it leaks somewhere.
getting there fast.
video soon!
denmah
08-10-2010, 06:01 PM
http://www.youtube.com/watch?v=Ed-tjaZnzdc
BigWhiteTodd
08-10-2010, 10:00 PM
nice good job i have always wanted a busa
White.Lightning
08-11-2010, 10:44 AM
That frame was wrecked
denmah
08-11-2010, 12:22 PM
That frame was wrecked
really? i hadnt noticed that :banana:
denmah
08-23-2010, 02:04 AM
i cut more of the ass end of the bike off so the tire doesn rub, fired it up and rode it up and down the driveway today, bike sounds awesome it feels great to ride it, i wanna get new pegs on it, and the front wheel sorted out. (leaky tire, or broken rim? bent rim?) then i gotta put new brake pads on the front they feel ****ty, and remove the other rotor,
then i need to make a support bracket for the rear caliper
my dad is going to hammer the balls out of the tank in an effort to make it low profile for racing, and then we have to fix the front tabs so i can bolt it down.
i would love to race it this weekend.
denmah
08-23-2010, 02:16 AM
http://img.photobucket.com/albums/v479/denmah/busar/23081001.jpg
http://img.photobucket.com/albums/v479/denmah/busar/23081005.jpg
http://img.photobucket.com/albums/v479/denmah/busar/23081004.jpg
http://img.photobucket.com/albums/v479/denmah/busar/23081003.jpg
http://img.photobucket.com/albums/v479/denmah/busar/23081002.jpg
jesse096
08-23-2010, 11:11 AM
Awesome progress so far, to see what it started out as, and to see it almost complete is amazing, great work!
-Jesse
denmah
10-17-2010, 12:15 AM
getting there!
custom 4-1 header by Matt Lisle
http://img.photobucket.com/albums/v479/denmah/busar/07101004.jpg
http://img.photobucket.com/albums/v479/denmah/busar/07101005.jpg
http://img.photobucket.com/albums/v479/denmah/busar/07101006.jpg
http://img.photobucket.com/albums/v479/denmah/busar/07101007.jpg
http://img.photobucket.com/albums/v479/denmah/busar/07101008.jpg
denmah
10-17-2010, 12:15 AM
http://img.photobucket.com/albums/v479/denmah/2010-10-14_17-41-24_459.jpg
http://img.photobucket.com/albums/v479/denmah/2010-10-14_18-42-01_116.jpg
pinned in 5 more pins into the harness, and viola, live data reading, and ECU flashing.
removed the top speed limiter, extended the redline to 11,600 and flashed it so that the IAT would stay at 66deg for tuning
denmah
10-17-2010, 12:16 AM
pulled out the oil pan and pickup, matt is going to cut about an inch out of the pan and weld it up, so i can go LOWWWERRRRR
http://img.photobucket.com/albums/v479/denmah/busar/2010-10-15_23-30-45_571.jpg
http://img.photobucket.com/albums/v479/denmah/busar/2010-10-15_23-30-31_835.jpg
http://img.photobucket.com/albums/v479/denmah/busar/2010-10-15_23-30-23_26.jpg
denmah
10-17-2010, 12:20 AM
got the oil pan cut down today
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101002.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101006.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101009.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101011.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101013.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101015.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101017.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101018.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101030.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101031.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101032.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101033.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101034.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101035.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101036.jpg
http://img.photobucket.com/albums/v479/denmah/busar/pancut/16101037.jpg
denmah
10-31-2010, 04:08 PM
got 4 passes in today, did some datalogging and tuning at the track
4th and final pass was a 9.8 @ 145mph
getting there
Goddabob
11-01-2010, 04:26 PM
That exhaust looks like a beast, got any better pictures of it?
denmah
11-09-2010, 02:44 AM
other than those, nope.
denmah
01-19-2011, 12:40 AM
stock ECU two step setup
http://www.youtube.com/watch?v=tF7ewBFy-o0&feature=player_embedded
denmah
01-19-2011, 12:40 AM
first day out
http://img.photobucket.com/albums/v479/denmah/busar/towing1.jpg
http://img.photobucket.com/albums/v479/denmah/busar/545644760_photobucket_8876_.jpg
denmah
01-19-2011, 12:41 AM
http://www.youtube.com/watch?v=ZA5o2sRjEbY&feature=player_embedded
you can really see where how i said the 60ft totally surprised me.
to my surprise i actually yanked the tire at only 2000rpm there, and you can tell how i was barely on the gas because it yanked tire, and totally fell on its face till i opened the throttle hahah
surprised i still pulled that good of a 60ft...
bottom end grunt of the 1300!
denmah
01-19-2011, 12:43 AM
after this i decided that this thing was moving pretty good on motor, but not fast enough.
http://img.photobucket.com/albums/v479/denmah/busar/545644760_photobucket_12634_.jpg
http://img.photobucket.com/albums/v479/denmah/busar/16111002.jpg
http://img.photobucket.com/albums/v479/denmah/busar/16111006.jpg
big boy dry nitrous spraybar installed in my airbox.
denmah
01-19-2011, 12:43 AM
billet clutch slave cyl support
http://img.photobucket.com/albums/v479/denmah/busar/23111005.jpg
http://img.photobucket.com/albums/v479/denmah/busar/23111001.jpg
denmah
01-19-2011, 12:45 AM
picked up some juice parts today to finish off the kit
http://img.photobucket.com/albums/v479/denmah/busar/juiceready.jpg
40lb HD clutch springs, nitrous solenoid, and bottle pressure gauge.
http://img.photobucket.com/albums/v479/denmah/busar/2010-11-24_21-45-20_692.jpg
http://img.photobucket.com/albums/v479/denmah/busar/2010-11-24_21-45-13_842.jpg
http://img.photobucket.com/albums/v479/denmah/busar/2010-11-24_21-45-07_83.jpg
denmah
01-19-2011, 12:46 AM
2.5lb bottle mounted up on the rear subframe
http://img.photobucket.com/albums/v479/denmah/busar/27111002.jpg
denmah
01-19-2011, 12:47 AM
quick nitrous kit overview on video, bunch of my friends were wondering how it all worked.
http://www.youtube.com/watch?v=LCTRJzusdMc&feature=player_embedded
please don't mind my dutchy accent lol
qbcsvt
01-19-2011, 01:34 AM
These things are beasts...... Looking good so far! Are you planning on making it flashy or working on performance first?
- amyn
denmah
01-19-2011, 01:41 AM
i actually would like to make it uglier
http://img.photobucket.com/albums/v479/denmah/busar/busaisland1.jpg
any suggestions
denmah
01-19-2011, 01:43 AM
whats retarded to think is it has no aerodynamics.
still on the wheels and tires it was wrecked with.
i am 205 unsuited, *motorcycle gear weighs alot!*
and the bike trapped 145 on totally stock motor with very minimal tuning.
denmah
01-19-2011, 01:44 AM
nitrous spraybar action
http://img.photobucket.com/albums/v479/denmah/busar/MVC-003F-1.jpg
Got Insulin?
01-19-2011, 02:22 AM
Looks rediculous? How mad was the guy with the wheelie bar that you edged him out? haha. Awesome, build, man!
Spocknasty
01-19-2011, 03:01 AM
Balls of steel!
AMF Racing
01-19-2011, 03:38 AM
just think what it could do with a pro tst driver.......
denmah
01-19-2011, 09:17 AM
Looks rediculous? How mad was the guy with the wheelie bar that you edged him out? haha. Awesome, build, man!
he laughed,
i cut a 1.57 even botching that launch a little and a .020 light
he cut a 1.55 and a worse reaction time of .0430
so he actually did out 60ft me, but not by much, and he ****in better have with that 2step and bars!
little more practice i should be in the 1.4x range and low 9s on motor
the juice will carry me the rest of the way
OMGz Turbo
01-19-2011, 01:52 PM
sweet project i would love to do something like this
ReVision
01-19-2011, 03:14 PM
Nice job Matt, I still have to check this bike in person.
denmah
06-02-2011, 12:38 PM
loaded her up on motor, and layed down 140hp, i was able to straiten the bike out and make another 11hp totaling 151on motor. the race gas actually made the bike richer than the pumpgas i was running.
http://img.photobucket.com/albums/v479/denmah/busar/IMAG0110.jpg
ended up with a 13.2 AFR and 34deg of timing in the motor.
happy with that i moved on to the 30shot
http://img.photobucket.com/albums/v479/denmah/busar/IMAG0113.jpg
i ended up using a 12.5-13.0 AFR and 32deg of timing to make 170 hp to the tire with a 24 nitrous jet in my dry bar.
tire was getting so boogery it was throwing rubber in the dyno bay, youll see on the video it hits me and the dude in the back of the head and arms haha
it was throwing chunks like this on the 60shot
http://img.photobucket.com/albums/v479/denmah/busar/IMAG0114.jpg
same 12.5-13.0 afr wide open, a little fatter on the hit to be safe, and 30 deg of timing made 200.xx to the tire.
whats most amazing is my power curve holds power flat at 200hp from 9-11k on the dyno, pretty awesome for a 1200cc bike.
dyno pull on motor
http://img.photobucket.com/albums/v479/denmah/busar/busamotor.jpg
dyno pull on 60shot (50rwhp, pretty good for a long bike with alot of chain)
http://img.photobucket.com/albums/v479/denmah/busar/busa60shot.jpg
and the three pulls overlayed
http://img.photobucket.com/albums/v479/denmah/busar/3busaruns.jpg
ill get video up in a little gotta cut through it.
all in all i am extremely happy with picking up more power on motor when i was already trapping low 140mph range.
and the increase of 50hp is pretty retarded, going to take alot of getting used to, and a better tire.
the owner at JD Cycleworks (http://www.jdscycleworks.com) is an awesome guy, very knowledgeable and was the only tuner in the tristate area with a bike dyno that would let me tune my own god damned bike lol
bike sounds so amazing on nitrous that on motor it sounds like a turd haha
denmah
06-02-2011, 01:16 PM
http://www.youtube.com/watch?v=lqahJcO03fc
mo_hish
06-02-2011, 01:31 PM
lol getting rubber shot into the back of your head on the dyno
02vwgolf
06-02-2011, 05:15 PM
Holy **** 201 on a bike is nasty!! rubber chunk in the head is gnarly too haha. Good work as always
Beachcomber
06-02-2011, 06:17 PM
Thats sick .. Congrats on the numbers .. I know how hard my busa pulls .. I cannot even imagine what yours must be like !!!
denmah
06-02-2011, 09:22 PM
Thats sick .. Congrats on the numbers .. I know how hard my busa pulls .. I cannot even imagine what yours must be like !!!
yeah it trapped 145mph with 140hp to the tire...
pretty wild to think.
it makes a little less than you might think because it is 9 inches longer than a regular busa, with a 146link chain lol :cool:
dmyers151
06-03-2011, 08:27 AM
Sick bike, I love it when you can take something all busted up and make it work.
I got caught up in your youtube channel for an hour yesterday. You guys are hilarious.
Beachcomber
06-03-2011, 09:10 AM
yeah it trapped 145mph with 140hp to the tire...
pretty wild to think.
it makes a little less than you might think because it is 9 inches longer than a regular busa, with a 146link chain lol :cool:
They are unreal bikes .. And "Cadillac" as my uncle would say .. I bet yours is a absolute blast to ride on the track .. Looking forward to more posts from you .. Be careful on that beast huh !!!
denmah
06-03-2011, 10:20 AM
Sick bike, I love it when you can take something all busted up and make it work.
I got caught up in your youtube channel for an hour yesterday. You guys are hilarious.
haha almost 600 videos going back 6 years i hope you had fun!
denmah
06-06-2011, 04:44 PM
bought a shinko hookup drag radial for this pig, going to give it hell
OBEEWON
06-06-2011, 05:44 PM
This bike is powerful like a smelly fart.
I managed sub 3 second 60'fts on my GSXR6.
I know...Im a pimp. Beat that lol.
denmah
06-08-2011, 08:02 AM
haha i had a stock wheelbase zx6r that i managed 1.71 with
then i stretched it and got 1.61's
the busa cuts 1.5x 60fts not even trying off idle. so much power down low
denmah
06-10-2011, 12:47 AM
http://img.photobucket.com/albums/v479/denmah/busar/shinko.jpg
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.